• 제목/요약/키워드: Internal Rate of Return Method

검색결과 36건 처리시간 0.022초

부울경 광역도시철도망 구축 필요성에 관한 연구 - 국도 7호선 중심으로 - (A Study on the Construction Demand for Network of Metro Railroad in Busan-Ulsan-Gyeongnam Area - In the place of National Road No.7 -)

  • 최양원
    • 대한토목학회논문집
    • /
    • 제31권6D호
    • /
    • pp.771-778
    • /
    • 2011
  • 근래 양산시와 부산시간의 활발한 이동량에 따라 최근 도시철도 1호선 양산선(노포~북정)의 예비타당성조사가 완료되어 타당성이 있는 것으로 결론되어 짐에 따라 도시철도 서비스가 취약한 웅상지역의 교통문제를 개선하고 광역도시간의 균형발전을 도모할 수 있도록 부울경을 연계하는 광역도시철도망 구축 필요성이 요구되고 있다. 또한 광역도시철도망 구축의 필요성을 강조하기 위해 대상지역 수단별 통행량과 해당지역 도로통행배정을 조사하였고, 노선대안별 수송수요를 예측하여 수단별 통행량과 통행배정 결과에 따라 개략적인 경제적 분석을 위해 설정된 노선대안별 건설비와 편익을 산정하였다. 본 과업의 3개의 대상 노선안 중 효율적인 노선으로 선정된 노선 1안의 건설에 필요한 총 사업비는 7,943.2억원으로 산출되었으며, 사업비중 순공사비가 가장 많은 비용을 차지하고 있으며 다음으로 예비비, 차량구입비, 부대비 순으로 나타났으며 단, 용지보상비는 계상되지 않았다. 특히 노선 1안은 건설시 경제성 분석결과 편익/비용비가(B/C)가 0.584, 순현재가치(NPV)가 -2,174.7억원, 내부수익율(IRR)이 0.604%로 분석되어 현 단계에서는 경제성이 다소 없는 것으로 나타났으나, 장기적으로 노선 3안인 월평~용당의 양산구간만을 건설시 편익/비용비가(B/C)가 0.737로 나타나고 있다. 따라서 도시철도 서비스가 취약한 웅상지역 주민의 편의를 도모하기 위해 부산 도시철도 기본계획 재정비시 기존 신정선을 연장하여 도시철도 관련 상위계획에 본 과업노선을 포함시켜 장래 노선 2안인 부산~양산~울산으로 이어지는 광역도시철도망 체계 구축이 반드시 필요할 것으로 판단되고 있다.

해양생태계 복원기술개발 사업의 경제적 타당성 분석 (Economic Feasibility Analysis of Marine Ecosystem Restoration Technology Program)

  • 권영주;백상규;유승훈
    • 해양환경안전학회지
    • /
    • 제20권2호
    • /
    • pp.130-142
    • /
    • 2014
  • 정부는 훼손된 해양생태계의 현황 및 원인을 파악하고 생태계 기능 복원 및 손실 방지 전략을 수립하기 위해 해양생태계 복원기술개발 사업의 시행을 고려하고 있다. 사업 시행 여부에 대한 판단을 위해서는 이 사업에 대한 경제적 타당성 분석이 필수적으로 요구된다. 이에 본 연구에서는 조건부 가치측정법(CVM, contingent valuation method)을 적용하여 사업 수행의 경제적 타당성을 분석하고자 한다. 지불의사 유도방법으로 유인일치적인 양분선택형 모형을 이용하되, 지불의사액 추정모형으로 영(0)의 응답을 명시적으로 다룰 수 있는 스파이크 모형을 적용한다. CVM 적용을 위한 설문조사는 미국 해양대기청의 지침에 따라 전국 1,000가구를 대상으로 일대일 개별면접을 통해 2013년에 시행되었다. 분석결과 연간 가구당 평균 지불의사액은 5,414원으로 추정되었다. 이 값을 전국으로 확장하면 향후 5년 동안 연간 약 986억원에 달한다. 이 값과 해양생태계 복원기술개발 사업의 투자비 정보를 이용하여 경제성을 분석한 결과, 순현재가치, 편익/비용 비율, 내부수익률은 각각 3,378억원, 5.20, 65.9 %로 산정되어 각각 0, 1.0, 5.5 %를 상회하므로 이 사업은 비용-편익 분석을 통과한다.

CVM을 이용한 해상교통안전시설 투자 편익 분석 (Cost-Benefit Analysis on Marine Transportation Safety Facility Using CVM(Contingent Valuation Method))

  • 김수엽;이건우
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2014년도 춘계학술대회
    • /
    • pp.73-75
    • /
    • 2014
  • 본 연구는 해상교통안전시설 투자로 인한 해양사고 예방의 경제적 효과를 분석하는 것이다. 안전시설 투자의 경제적 효과 분석을 위해, 조건부 가치측정법을 이용하였다. 조건부 가치측정법은 특정 응답자들을 대상으로 설문지 또는 면접을 통해 환경재와 같은 비시장재의 가치를 계량적으로 측정하기 위해서 사용하는 방법이다. VTS는 시장재가 아니므로 VTS 시설투자에 대한 경제적 타당성을 추정하기 위하여 향후 VTS 시설 설치 예정 지역의 어민 및 선사 등을 대상으로 설문조사를 실시하였다. 설문조사를 실시한 결과, 통역지역 VTS 신설로 인해 발생할 수 있는 연간 총편익은 약110억으로 추정되었다. 2014년부터 5년간 소득세의 형태로 지불하게 된다면, 5년 동안 발생하게 되는 편익은 현재가치 기준으로 약473억원이다. 통영 VTS신설에 따른 경제성 분석결과, 편익-비용비율(B/C ratio)이 3.193로 1보다 높게 나왔고, 순현재가치(NPV)가 325억, 그리고 내부수익률(IRR)이 37.4%로 사회적 할인율인 5.5%보다 높아, 경제적 타당성이 있는 것으로 분석되었다.

  • PDF

지하수자원기술의 경제적 파급효과분석 사례연구 - 대도시지역(부산, 울산, 광주) 지하수오염저감기술연구사업을 중심으로 - (Economic Impact Analysis on a R&D Project of Groundwater Remediation : A Case Study of Busan, Ulsan and Gwangju Metropolitan City)

  • 안은영;김성용;이재욱;손병국;김정찬;신중호
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제10권1호
    • /
    • pp.18-25
    • /
    • 2005
  • 1998년부터 2002년까지 한국지질자원연구원의 기본사업으로 5년간 수행한 대도시 지역 지하수 오염저감기술연구사업의 경제적 파급효과를 조건부가치측정법을 활용하여 연구사업 성과의 비용, 편익, 순현재가치, 비용편익비, 내부수익률을 산정하였다. 분석과제의 주요성과 중 계량화가 가능한 직접 편익은 지하수 음용화 시설 구축에 따른 편익 및 지하수 데이터 가치 편익 두 가지로 분석되었다. 이들 편익에 경제적 파급효과를 2002년도 현재가치로 환산한 결과, 할인율 $10\%$에서 비용은 50.9억원, 편익은 676.9억원, 순현재가치는 626.0억원, 비용편익비는 13.3, 내부수익율은 $152\%$로 나타났다.

마이스터고 학생에 대한 산업체 HR 담당자의 이미지 분석 (Analysis of Image of Meister High School Students by Industrial HR Managers)

  • 조한진;위선복;이동호;김민웅;김태훈
    • 직업교육연구
    • /
    • 제36권2호
    • /
    • pp.68-94
    • /
    • 2017
  • 이 연구는 산업체 HR 담당자가 기대하는 마이스터고 학생 이미지와 현재 인식하는 이미지의 차이를 분석하여, 학교 교육과 취업 정책 발전 방안에 기초자료를 제공하고자 한다. 이를 위하여, Osgood(1957)이 개발한 의미 분별법을 조사도구로 선정하였으며, 마이스터고 학생에 관한 이미지를 조사하기 위해 Osgood이 제안한 50개의 형용사군과 선행연구들이 추가로 사용한 21개의 형용사군 중 전문가 10명의 타당도 검사를 거쳐 내용타당도 값을 충족시키지 못하는 형용사를 제외하고 최종 20개의 형용사를 선정하였다. 완성된 설문지를 광역권, 비 광역권으로 비율표집을 통하여 최종 표본 350개를 선정하였으며, 총 600개의 설문지를 발송하여 230개의 설문지를 회수하였다. 회수율은 38.3%로 나타났다. 결과는 다음과 같다. 첫째, 산업체 HR 담당자가 기대하는 마이스터고 학생의 이미지는 평균 2.49로 나타나 긍정적인 이미지를 기대한다고 할 수 있다. 또한 형용사를 그룹화 하기 위하여 요인분석을 한 결과 3개의 요인인 외면적 요인, 사고방식 요인, 내면적 요인으로 도출되었다. 둘째, 산업체 HR 담당자가 현재 인식하는 마이스터고 학생의 이미지는 평균 3.24로 나타나 긍정적인 이미지로 마이스터고 학생을 인식한다고 할 수 있다. 셋째, 산업체 HR 담당자가 현재 인식하는 마이스터고 학생 이미지는 기대하는 마이스터고 학생 이미지에 미치지 못하는 것으로 나타났다.

Computer Aided Innovation 역량이 연구개발역량에 미치는 효과: 국내 중소기업을 대상으로 (The Effects of the Computer Aided Innovation Capabilities on the R&D Capabilities: Focusing on the SMEs of Korea)

  • 심재억;변무장;문효곤;오재인
    • Asia pacific journal of information systems
    • /
    • 제23권3호
    • /
    • pp.25-53
    • /
    • 2013
  • This study analyzes the effect of Computer Aided Innovation (CAI) to improve R&D Capabilities empirically. Survey was distributed by e-mail and Google Docs, targeting CTO of 235 SMEs. 142 surveys were returned back (rate of return 60.4%) from companies. Survey results from 119 companies (83.8%) which are effective samples except no-response, insincere response, estimated value, etc. were used for statistics analysis. Companies with less than 50billion KRW sales of entire researched companies occupy 76.5% in terms of sample traits. Companies with less than 300 employees occupy 83.2%. In terms of the type of company business Partners (called 'partners with big companies' hereunder) who work with big companies for business occupy 68.1%. SMEs based on their own business (called 'independent small companies') appear to occupy 31.9%. The present status of holding IT system according to traits of company business was classified into partners with big companies versus independent SMEs. The present status of ERP is 18.5% to 34.5%. QMS is 11.8% to 9.2%. And PLM (Product Life-cycle Management) is 6.7% to 2.5%. The holding of 3D CAD is 47.1% to 21%. IT system-holding and its application of independent SMEs seemed very vulnerable, compared with partner companies of big companies. This study is comprised of IT infra and IT Utilization as CAI capacity factors which are independent variables. factors of R&D capabilities which are independent variables are organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability. The highest average value of variables was 4.24 in organization capability 2. The lowest average value was 3.01 in IT infra which makes users access to data and information in other areas and use them with ease when required during new product development. It seems that the inferior environment of IT infra of general SMEs is reflected in CAI itself. In order to review the validity used to measure variables, Factors have been analyzed. 7 factors which have over 1.0 pure value of their dependent and independent variables were extracted. These factors appear to explain 71.167% in total of total variances. From the result of factor analysis about measurable variables in this study, reliability of each item was checked by Cronbach's Alpha coefficient. All measurable factors at least over 0.611 seemed to acquire reliability. Next, correlation has been done to explain certain phenomenon by correlation analysis between variables. As R&D capabilities factors which are arranged as dependent variables, organization capability, process capability, HR capability, technology-accumulating capability, and internal/external collaboration capability turned out that they acquire significant correlation at 99% reliability level in all variables of IT infra and IT Utilization which are independent variables. In addition, correlation coefficient between each factor is less than 0.8, which proves that the validity of this study judgement has been acquired. The pair with the highest coefficient had 0.628 for IT utilization and technology-accumulating capability. Regression model which can estimate independent variables was used in this study under the hypothesis that there is linear relation between independent variables and dependent variables so as to identify CAI capability's impact factors on R&D. The total explanations of IT infra among CAI capability for independent variables such as organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability are 10.3%, 7%, 11.9%, 30.9%, and 10.5% respectively. IT Utilization exposes comprehensively low explanatory capability with 12.4%, 5.9%, 11.1%, 38.9%, and 13.4% for organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability respectively. However, both factors of independent variables expose very high explanatory capability relatively for technology-accumulating capability among independent variable. Regression formula which is comprised of independent variables and dependent variables are all significant (P<0.005). The suitability of regression model seems high. When the results of test for dependent variables and independent variables are estimated, the hypothesis of 10 different factors appeared all significant in regression analysis model coefficient (P<0.01) which is estimated to affect in the hypothesis. As a result of liner regression analysis between two independent variables drawn by influence factor analysis for R&D capability and R&D capability. IT infra and IT Utilization which are CAI capability factors has positive correlation to organization capability, process capability, human resources capability, technology-accumulating capability, and collaboration capability with inside and outside which are dependent variables, R&D capability factors. It was identified as a significant factor which affects R&D capability. However, considering adjustable variables, a big gap is found, compared to entire company. First of all, in case of partner companies with big companies, in IT infra as CAI capability, organization capability, process capability, human resources capability, and technology capability out of R&D capacities seems to have positive correlation. However, collaboration capability appeared insignificance. IT utilization which is a CAI capability factor seemed to have positive relation to organization capability, process capability, human resources capability, and internal/external collaboration capability just as those of entire companies. Next, by analyzing independent types of SMEs as an adjustable variable, very different results were found from those of entire companies or partner companies with big companies. First of all, all factors in IT infra except technology-accumulating capability were rejected. IT utilization was rejected except technology-accumulating capability and collaboration capability. Comprehending the above adjustable variables, the following results were drawn in this study. First, in case of big companies or partner companies with big companies, IT infra and IT utilization affect improving R&D Capabilities positively. It was because most of big companies encourage innovation by using IT utilization and IT infra building over certain level to their partner companies. Second, in all companies, IT infra and IT utilization as CAI capability affect improving technology-accumulating capability positively at least as R&D capability factor. The most of factor explanation is low at around 10%. However, technology-accumulating capability is rather high around 25.6% to 38.4%. It was found that CAI capability contributes to technology-accumulating capability highly. Companies shouldn't consider IT infra and IT utilization as a simple product developing tool in R&D section. However, they have to consider to use them as a management innovating strategy tool which proceeds entire-company management innovation centered in new product development. Not only the improvement of technology-accumulating capability in department of R&D. Centered in new product development, it has to be used as original management innovative strategy which proceeds entire company management innovation. It suggests that it can be a method to improve technology-accumulating capability in R&D section and Dynamic capability to acquire sustainable competitive advantage.