• Journal of Advanced Marine Engineering and Technology
• /
• v.8 no.1
• /
• pp.17-36
• /
• 1984

Since 1973, the competition on the development of fuel saving type internal combustion engines has become severe by the two times oil shock, and new type engines are reported every several months. Whenever these new type engines are developed, new designs are required and they will be offered in the market after performing the endurance test for a long time. But the engine market is faced with a heavy burden of finance, as the developing of a new engine requires tremendous expenses. For this reason, the computer simulation method has been lately developed to cope with it. The computer simulation method can be available to perform the reasonable research works by the theoretical analysis before carrying out practical experiments. With these processes, the developing expenses are cut down and the period of development is curtailed. The object of this study is the development of simulation computer program for the small naturally aspirated four-stroke diesel engine which is intended to product by the original design of our country. The process of simulation is firstly investigated for the ideal engine cycle, and secondly for the real engine cycle. In the ideal engine cycle, each step of the cycle is simulated by the energy balance according to the first law of thermodynamics, and then the engine performance is calculated. In the real cycle imulation program, the injection rate, the preparation rate and the combustion rate of fuel and the heat transfer through the wall of combustion chamber are considered. In this case, the injection rate is supposed as constant through the crank angle interval of injection and the combustion rate is calculated by the Whitehouse-Way equation and the heat transfer is calculated by the Annand's equation. The simulated values are compared with measured values of the YANMAR NS90(C) engine and Mitsubishi 4D30 engine, and the following conclusions are drawn. 1. The heat loss by the exhaust gas is well agree with each other in the lower load, but the measured value is greater than the calculated value in the higher load. The maximum error rate is about 15% in the full load. 2. The calculated quantity of heat transfer to the cooling water is greater than the measured value. The maximum error rate is about 11.8%. 3. The mean effective pressure, the fuel consumption, the power and the torque are well agree with each other. The maximum error is occurred in the fuel consumption, and its error rate is about 7%. From the above remarks, it may be concluded that the prediction of the engine performance is possibly by using the developed program, although the program needs to reform by adding the simulation of intake and exhaust process and assumping more reliable mechanical efficiency, volumetric efficiency, preparation rate and combustion rate.

• Journal of the Korean Electrochemical Society
• /
• v.20 no.2
• /
• pp.27-33
• /
• 2017

Conventional lithium ion batteries suffer from notorious safety issues caused by inevitable lithium dendrite formation and proliferation during over/fast charging processes. The lithium dendrites or mechanical damage on the separator induce internal short circuit in LiB that generates extensive amount of heat within contacted electrode surfaces through the separator. During this heat generation, conventional polyolefin separators shrinks dramatically, and increasing short circuit pathway, that causes the battery to explode. To overcome this serious issue, ceramic coated separators are developed in commercial LiB to enhance thermal and mechanical stability. In this paper, various size(IL = 488.5 nm, I = 538.7 nm, S = 810.3 nm, D = 1533.3 nm) of $Al_2O_3$ particles are coated using styrene-butadiene rubber(SBR) / carboxymethyl cellulose(CMC) binder on PE separator to investigate its thermal stability and electrochemical effect on LiB coin cell with NCM cathode and Li metal anode.

• Korean Journal of Community Nutrition
• /
• v.10 no.6
• /
• pp.905-919
• /
• 2005

This study raised the necessity of developing performance indicators for measuring the management efficiency and effectiveness of school food service, and as a means of helping its implementation, a balanced score card (BSC) approach developed by Norton and Kaplan was adopted. This study established BSC in seven phases through literature: Phase 1 Defining a school food service and the scope of working activities, Phase 2 Establishing the vision of a school food service, Phase 3 Setting strategic goals, Phase 4 Identifying critical success factors (CSFs), Phase 5 Developing Key Performance Indicators (KPIs), Phase 6 Extracting cause and effect relationship, and Phase 7 Completing a preliminary BSC. The preliminary BSC was fumed into a survey, which was administered to food service related people working at the Office of Education and School Food Service including 16 offices,209 dietitians, 48 school administrators both from self-operated and contract-managed, and 9 experts in areas related to school food service. They were asked questions about strategies from 4 different perspectives,12 CSFs, 39 KPls, and the cause and effect relationships among them. As a result, among the CSFs based on 4 different perspectives, all factors other than ' zero sum on profit/loss ' from the financial perspective turned out to be valid. In terms of KPIs, manufacturing cost percentages, casualty loss count/reduction rates, school foodervice participation rates, and sales goal achievement rates were found to be valid from the financial perspective, while student satisfaction index, faculty satisfaction index, leftover ratio, nutrition educational performance count, index of evaluating nutrition education, customer claim count/reduction rate, handling customer claim count/reduction rate, and parent satisfaction index were found to be valid from the customers' perspective. Besides, nutritional requirement sufficient ratio, nutritional management score, food poisoning outbreak count, employee safety accident count, sanitary inspection assessment index, meals per labor hour (productivity index), computerization ratio, operational management index, and purchase management assessment index were also found to be valid from the perspective of internal business processes. From the perspective of innovation and learning, employee turnover ratio/rate of absenteeism, annual education and training count, employee satisfaction index, human resource management assessment index, annual menu-related customer feedback, food service information index for employees and parents/schools were also found to be valid. The significance of this study is to present indices for measuring overall performance of school lunch food service operations without putting any limitation on types of school food service management, and to help correctly assess the contribution of the current types of school food service management to schools and students. (Korean J Community Nutrition 10(6) : $905\∼919$, 2005)

• Journal of Elementary Mathematics Education in Korea
• /
• v.20 no.1
• /
• pp.1-15
• /
• 2016

In this paper, the following three issues are discussed in connection with intensive quantities. (1) Is there any relationship among intensive quantity, per unit quantity, and ratio? (2) Which intensive quantities obtained by two same extensive quantities are handled? And How are they handled? (3) Which intensive quantities obtained by two different extensive quantities are handled? And How are they handled? Based on the results of this discussions, three implications are suggested as conclusions to explore the direction for the development of handling intensive quantities in elementary math textbooks and workbooks. Firstly, it is necessary to systematize the systemize a series of processes to handle intensive quantities. There is a need to rethink to use terms like speed and velocity before handling the ratio. Secondly, there is a need to rethink the definition of intensive quantities which have the particular names. For example, it is necessary to rethink using average distance in the definition of speed and the average population in the definition of density of population. Thirdly, it is necessary to consider the limiting the kinds of intensive quantities obtained by two same extensive quantities handled in the elementary math. There is a need to set limit to them which are used in daily life, and there is a need to rethink to use them which are used in the specialized area. There is a need to rethink the using hitting ratio in the form of %.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.2
• /
• pp.102-107
• /
• 1998

Solomon's seal (Polygonatum odoratum) seedlings raised through its seeds can replace the rhizomes impelling higher cost for transplanting, This experiment was done to determine the seed characteristics and the germinating processes to give some information on bulk production of seedlings using the seeds. The external or internal morphology of seeds or seedlings grown in lab. or greenhouse was examined mainly with stereomicroscope. The external shape of Solomon's seal seed was hard seed-coat and orthotropous ovule with linear type embryo stretching to the center of seed. Germination proceeded through the several steps. The lower part of seed embryo having the primordia of bulbil and roots first grew before the bulbil and roots was developed from the primordia. The lower part of embryo was enlarged toward the endosperm of seed as soon as seed germinated. Then epicotyl was formed on the apex of bulbil. The epicotyl was elongated after at least 6-week chilling treatment for breaking its dormancy and the first leaf shape was affected by light intensity given during seedling emergence. The bulbil was the first organ of the rhizome used as tea or herb medicine.

• Conservation Science in Museum
• /
• v.21
• /
• pp.53-66
• /
• 2019

This study describes the processes undertaken for the conservation treatment of metal artifacts excavated in Hasong-ri, Yeongwol, Gangwon-do and the results of the related surface composition analysis. X-ray fluorescence analysis (XRF) was applied to analyze the surface composition of a small gilt-bronze wind chime, two clappers, and a small gourd-shaped bronze bottle. The gourd-shaped bronze bottle was investigated using radiography to examine its internal structure. The wind chime and clappers were excavated from the same location. A gilt layer was identified on the wind chime, but surface corrosion made it difficult to identify any such layers on the clappers. The element analysis revealed that the wind chime was made of bronze in a Cu-Sn-Pb ternary system and was gilt-plated using mercury amalgam. The clappers were made from copper with a small amount of gold detected, but did not show any evidence of mercury. Since a thick corrosion layer was affixed to the surface of each clapper, it was impossible to identify the surface composition and determine if the clappers had been gilded. It is possible that the gold detected from the clappers was a foreign substance or had detached from the giltbronze wind chime buried alongside them. The small gourd-shaped bronze bottle was investigated through surface element analysis and radiography to verify if it was a type of silver bottle used as currency during the Goryeo dynasty. The radiography photography identified that a small hole in the middle of the base had been stopped up. The general surface analysis did not detect silver, which suggests that the bottle was made of bronze instead and was not one of the silver bottles used as a means of currency.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.144-155
• /
• 1996

During the 1990s the workplace has grown more complex and business competition has increased world-wide. All organizations, whether for-profit or non-profit have been forced to respond to market changes. More advanced information and technology, greater product diversity, shorter product life cycles, increased quality requirements, more regulation oversight, decreasing productivity, more competitors, and increasing overhead costs have motivated organizations to focus on ways to deliver products cheaper, better, and faster. Many organizations are searching for ways to reduce costs through downsizing, reengineering business processes, implementing quality management, outsourcing, and improving cost management. Support departments that provide services internal to an organization such as human resources, legal, and environmental, safety, and health (ES&H) are often the first organization targeted for cost reduction and cost control initiatives because these functions are part of a rapidly increasing overhead cost. Recently, ES&H functions are incresingly being integrated into the business of business to contribute value to organization beyond mere compliance with ES&H regulations. The discussions and development of the ISO compatible Environmental Management Standards or Occupational Safety and Health Management Standards is another impetus to integrate ES&H function into the business of business. Thus, ES&H professional need new skills to analyze the cost of their function and communicate the value of the products and services they provide. In recent years, the need for and the importance developing cost management and business skills by ES&H professionals have been emphasized in the literature. Communicating with decision makers in terms of cost and value to the organization, and by using business language and business arguments is the first step toward effectively integrating ES&H activities into the business of business. Activity-based costing (ABC) is a cost management method that measures the cost of a product or service based on the actual use of resources by activities, and based on the actual amount of activities used to produce a product or service. ABC is recommended as a tool for managers of ES&H organizations to determine the cost of developing and providing ES&H products within a for-profit firm or non-profit agency. This paper discusses the trend of integration of ES&H functions into the mainstream of business activities within an organization. The general principles of treditional cost accounting are presented as a bases for understandging why and how ABC will provide more accurate estimates of cost. The principles and concepts of ABS are presented as a tool for determining more accurately the true cost of ES&H products and services.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.65-75
• /
• 2006

Transparency on the Total System Performance Assessment (TSPA) is the key issue to enhance the public acceptance for a radioactive repository. To approve it, all performances on TSPA through Quality Assurance is necessary. The integrated Cyber R&D Platform is developed by KAERI using the T2R3 principles applicable for five major steps : planning, research work, documentation, and internal & external audits in R&D's. The proposed system is implemented in the web-based system so that all participants in TSPA are able to access the system. It is composed of three sub-systems; FEAS (FEp to Assessment through Scenario development) showing systematic approach from the FEPs to Assessment methods flow chart, PAID (Performance Assessment Input Databases) being designed to easily search and review field data for TSPA and QA system containing the administrative system for QA on five key steps in R&D's in addition to approval and disapproval processes, corrective actions, and permanent record keeping. All information being recorded in QA system through T2R3 principles is integrated into Cyber R&D Platform so that every data in the system can be checked whenever necessary. Throughout the next phase R&D, Cyber R&D Platform will be connected with the assessment tool for TSPA so that it will be expected to search the whole information in one unified system.

• Archives of design research
• /
• v.16 no.2
• /
• pp.323-334
• /
• 2003

This study is focused on subjective images that are produced before visualization in the digital information environment and on characteristics of objective, dynamic image expression that specifies the subjective images. In this study, the visual world that works in the action of "see"is expanded into vision of eyes, vision of brain, and vision of camera. Also we have redefined the definitions of image and its materialized image, yeongsang. It is defined that image contains a strong meaning of consciousness and mind, and that yeongsang involves vision in which constantly changing information of light is created and reproduced by physical processes. We made it clear that image expression in the 21 st century is becoming more generalized, simplified, and concentrated, by the digital technology, from existing specific non-real images to "informationalized" non-real images. This means that there exists an intrinsic difference in the expressional form of the modern analog environment and that of the recent digital environment in the area of yeongsang communication. Along with development of technology, image information raises plastic reality through indirect experience in the virtual space by expanding the sensual faculty of human. However, there also is a tendency for humans to rely more on technology instead of utilizing their creative faculty. Image expression by“the digital information environment” in the 21st century will pursue two sides; one is to shift from external expression of the human body in the cyber space to internal expression, and the other is to internalize the image world and make it connected worldwide. Further research is necessary in these fields.ary in these fields.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.689-695
• /
• 2010

The effect of the code conversion process of Korean script (Hangul), also known as words for numbers, was investigated using event-related potentials (ERPs) during mental arithmetic operations. Study subjects were asked to determine whether the arithmetic results of a given target stimuli were correctly matched. Visual inspection and statistics of mean ERPs showed stimulus type-dependent processing rather than task-dependent processing. Results of addition and multiplication tasks revealed that the overall temporal profiles of the Arabic numerals were similar to the Hangul words for numbers. The only exception to this observation was a delayed positive-slope peak occurring around 300 ms, which was likely related to the encoding process of Hangul words for numbers to Arabic-digits, defined as a 'transcoding-related potential.' Source analysis confirmed that the topography of different waveforms for the two conditions was attributed to a single dipole located in the left temporo-parietal area; this area is known to be involved in Hangul words for number processing. These results suggest that the initial processing for encoding words for numbers was followed by arithmetic operations without direct access of internal number representation. Korea Academia-Industrial cooperation Society. The Korea Academia-Industrial cooperation Society. The Korea Academia-Industrial cooperation Society. The Korea Academia-Industrial cooperation Society.