The demand for wire-cut EDM is increasing rapidly in the die and tool making industry. In this study machining characteristics such as machining rate, surface roughness, hand drum form and hardness of machined material are investigated experimentally under the conditions varing pulse on time, pulse off time, peak voltage, wire tension after fixing other conditions in SKD 11 and brass and brass workpiece. It was found that various operating conditions had significant influences on machining characteristics. But the hardness of workpiece was uneffected by operating conditions. Also it was obtained experimentally that brass workpeice had better machinability than SKD 11 one.dition according to the current(Ip) in an electric spark machine : 1) Electrode is utilized Cu and Graphite. 2) Work piece is used the material of carbon steel. The condition of experiment is : 1) Current is varied 0.7(A) to 50(A) and the time of electric discharging to work piece in each time is 30(min) to 60(min). 2) After the upper side of work piece was measured in radius(5$\mu$m) of stylus analyzed the surface roughness to ade the table and graph of Rmax by yielding data. 3) Electro wear ratio is : \circled1Cooper was measured ex-machining and post-machining by the electronic balance. \circled2The ex-machining of graphite measured by it, the post-machining was found the data from volume $\times$specific gravity and analyzed to made its table and graph on ground the data. 4) In order to keep the accuracy of voltage affected to the work piece was equipped with the A.V. R and the memory scope was sticked to the electric spark machine. 5) In order to preserve the precision of current, to get rid of the noise occured by internal resistance of electric spark machine and to force injecting for the discharge fluid , it made the fixed table for a work piece to minimize the work error by means of one's failure during the electric discharging.
휴대전화는 현재 가장 사적인 이동통신 수단으로 범용인증가입모듈의 보급과 함께 그 개인화 특성이 극대화 되고 있다. 본 연구에서는 휴대전화의 기능 모형을 도출하고 이를 기능 관계 모델을 사용하여 휴대전화의 개인화 기능 관계 모델을 제시하고, 그 작업을 분석한다. 제품의 기능 사이의 관계를 보여줄 수 있는 기능 관계 모델을 도출하기 위해 기능, 작업, 작업의 흐름, 작업의 목적, 기능범주, 기능범주와 기능 간의 영향 등을 사용하였으며, 이를 사용하여 최신 휴대전화의 기능 관계 모델을 작성하였다. 최근 휴대전화 3 개 모델로 만든 기능 관계 모델은 320 여개의 기능과 21 개의 기능 범주가 도출된 기능 모형을 기반으로 만들어졌다. 이를 개인화 기능을 중심으로 기능 관계를 모델링하게 되면 개인화 기능을 위한 정보가 저장되고 사용되는 내/외장 메모리가 모델의 중심에 놓이게 되는 기능 관계 모델이 도출되고, 저장과 조회, 연동 및 검색 등이 주요 작업이 된다, 휴대전화에서 개인화 기능 강화를 위해서는 각 기능간의 관계에 해당하는 작업을 강화하는 것이 주요하다.
Consumers' price related response in the clothing purchase decision-making process includes their expectation of price, price perception, attitude toward price and consequent behaviors. The purposes of this research are to systematically organize consumers' price related responses in the clothing purchase decision-making process, and to explain the effect of price on their purchasing. The qualitative research including shopping observation and in-depth interview was conducted. The result identified stages that showed different price related responses in clothing purchase decision-making process, and clarified each stage's characteristics. In the internal search stage, consumers recalled price information from memory and had a specific expectation about the price. This set a direction for the external search. In the external search stage, consumers selected brands or stores by a non-compensatory evaluating with an expectation of the price, and narrowed these down to several determinant alternatives by actively evaluating the products. In case a sufficient amount of price information was not recalled, the consumer established reference price through the external search. Finally, in the purchasing stage, consumers evaluated the determinant alternatives based on their compensatory evaluation. When perception of price was negative, consumers evaluate price combined with the higher criteria of clothing benefits, such as symbolic value and usability. The research is expected to contribute to predicting consumers' responses to price, and to establishing an effective pricing strategy.
In this paper, the activities carried out within the EU funded Clean Sky Joint Technology Initiative (JTI GRA) Project and aimed at developing a morphing flap, are illustrated. The reference device is a regional aircraft single slotted flap, enhanced with deforming capabilities to obtain improved hyper-lift performance. The design started with the identification of the internal architecture, intended to allow camber variations. A concentrated-hinge architecture was selected, for its ability to fit different curvatures and for the possibility of easily realizing an "armadillo-like" configuration, then avoiding the use of a complicate deformable skin. The flap layout is made of segmented ribs, elastically hinged each other and span-wise connected by conventional spars. Relative rotations of the rib elements are forced by SMA structural actuators, i.e., cooperating in the external loads absorption. Super-elastic SMA are used to make up recovery elastic elements, necessary to regain the original shape after activation. These further elements in turn contribute to the overall flap rigidity. After assessing the hinge number and the size of the SMA active and passive elements, the advanced design phase was dealt with. It was aimed at solving manufacturing issues and producing the executive drawings. The realized demonstrator was finally tested in lab conditions to prove its functionality in terms of whether target shape actuation or attained shape preservation under loads. On the basis of the numerical results and the experimental outcomes, precious hints were obtained for further developments of the concept.
중심성 뇌교 수초용해 (CPM) 및 뇌교의 수초용해(EPM) 은 대사 이상을 수반하는 여러 질환에서 뇌 세포 내외의 삼투질농도의 급속한 변화와 관련하여 발생하는 신경학적 질환이다. 저자들은 당뇨병성 신중에 의한 만성 신부전으로 신장이식을 받은 43세 남자 환자에서 발현한 CPM과 EPM 증례를 보고하였다. 환자는 망상, 연상이완, 환각, 부적절한 정동, 공격성, 기억장애 등을 수반한 정산병적 증상과 언어실조를 특징적으로 보인 경우로서, CPM과 EPM에서 비교적 드물게 발생하는 정신증상, 특히 정신병적 증상을 보인 증례이기에, 정선과적으로 중요한 임상적 의의를 가진다고 판단하여 문헌고찰과 함께 보고하는 바이다.
This paper presents a developing procedure of the CAN-based real-time simulator for car body control, aiming at replacing the actual W/H (Wiring Harness) and J/B(Junction Box) couple eventually. The CAN protocol, as one kind of field-bus communication, defines the lowest 2 layers of the ISO/OSI standard, namely, the physical layer(PL) and the data link layer(DLL), for which the CSMA/NBA protocol is generally adopted. For CPU, two PIC18Fxx8x's are used because of their built-in integration of CAN controller, large internal FLASH memory (48K or 64K), and their costs. To control J/B's and actuators, 2 controller boards are separately implemented, between which CAN lines communicate through CAN transceivers MCP255. A power motor for washing windshield, 1 door lock motor, and 6 blink lamps are chosen for actuators of the simulator for the first stage. For the software architecture, a polling method is used for the fast global response time despite its slow individual response time. To improve the individual response time and to escape from some eventual trapped-function loops, High/Low ports of the CPU are simply used, which increases the stability of the actuator modules. The experimental test shows generally satisfactory results in normal transmitting / receiving function and message trace function. This simulator based on CAN shows a promising usefulness of lighter, more reliable and intelligent distributed body control approach than the conventional W/H and J/B couple. Another advantage of this approach lies in the distributed control itself, which gives better performance in hard real-time computing than centralized one, and in the ability of integrating different modules through CAN.
급속한 프로세서 성능 향상에 따라 메인 메모리와의 속도차이를 극복하기 위해서 캐쉬메모리의 사용이 일반화 되었다. 일반적으로 내장된 캐쉬 블록의 메모리는 그 크기가 작기 때문에 테스트 관점에서 테스트 시간보다는 고장 검출률이 중요하다. 따라서 본 논문에서는 다양한 고장 모델을 테스트할 수 있는 테스트 알고리듬과 상대적으로 적은 오버헤드를 갖는 새로운 BIST(Built-In Self Test) 구조를 제안하였다. 새로운 동시 테스트 BIST 구조에서는 캐쉬제어 블록의 비교기를 태그 메모리 결과분석기로 사용한다. 이를 위한 비교기의 선행 테스트를 위해 변형된 주사사슬을 사용하여 테스트 클록을 감소하였다. 몇 개의 경계주사 명령어를 추가하여 내부 테스트 회로들을 제어할 수 있다. 새로운 메모리 테스트 알고리듬은 12N의 복잡도를 갖고 SAFs, AFs, TFs linked with CFs, CFins, CFids, SCFs, CFdyns 및 DRFs의 고장을 테스트할 수 있으며, 새로운 BIST 구조는 합성결과 기존의 동시 테스트 방법보다 약 11%의 오버헤드 감소가 가능하였다.
Due to its characteristics of light weight, high energy density, good safety, long service life, no memory effect, and environmental friendliness, lithium-ion batteries (LIBs) are widely used in various portable electronic products. The capacity and performance of LIBs largely depend on the performance of electrode materials. Therefore, the development of better positive and negative materials is the focus of current research. The application of metal organic framework materials (MOFs) derivatives in energy storage has attracted much attention and research. Using MOFs as precursors, porous metal oxides and porous carbon materials with controllable structure can be obtained. In this paper, rod-shaped Co-MOF-74 was grown on Ni Foam (NF) by hydrothermal method, and then Co-MOF-74/NF precursor was heat-treated to obtain rodshaped Co3O4/NF. Ni Foam was skeleton structured, which effectively relieved. The change of internal stress changes and destroys the structural volume of the electrode material and reduces the capacity attenuation. Co3O4/NF composite material has a specific discharge capacity of up to 1858 mA h/g for the first time, and a reversible capacity of up to 902.4 mA h/g at a current density of 200 mA/g, and has excellent rate and impedance performance. The synthesis strategy reported in this article opens the way to design high-performance electrodes for energy storage and electrochemical catalysis.
최근 전력소모와 읽기 성능이 우수한 Solid state disk(SSD)가 많이 사용되고 있으나 가격이 고가이고 삭제 및 쓰기 연산의 효율이 낮은 것이 단점이다. 이것을 보완하기 위한 저장장치의 일종이 하이브리드 하드디스크 (H-HDD: Hybrid Hard disk drive)인데 하드디스크 내부에 플래시 메모리(NVCache: Non-volatile Cache)를 장착하여 디스크블록의 캐시로 사용한다. 본 논문에서는 H-HDD의 저전력과 응답시간을 향상시키기 위해 NVCache의 선반입 및 관리 기법을 제안한다. 제안하는 기법은 NVCache를 읽기 캐시를 위주로 사용하고 쓰기캐시는 디스크 헤드와 스핀들의 상황에 따라 쓰기 연산을 지원한다. 읽기 캐시의 경우 시간적, 지역적 지역성을 동시에 고려하여 선반입을 통해 응답시간과 전력 소모를 감소시키고 쓰기 캐시의 경우 디스크 스핀들의 동작 상태에 따라 NVCache에 쓰기를 실시하여 저전력과 응답성을 향상시키고자한다.
암호화 시스템은 다양한 표준으로 인해 하드웨어 구성에 많은 어려움이 있다. 본 논문에서는 다양한 암호화 규격을 수용할 수 있는 재구성 가능한 타원 곡선 암호화 프로세서 구조를 제안한다. 제안된 프로세서 구조는 32bit 크기의 입출력 포트와 내부 버스를 가지며 유한체 연산 장치(AU), 입력/출력 장치(IOU), 레지스터 파일 그리고 프로그램이 가능한 제어 장치(CU)로 이루어져 있다. 제어 장치의 ROM에 저장되어 있는 마이크로 코드에 의하여 프로세서에서 사용할 키의 길이와 원시 다항식이 결정된다 마이크로 코드는 사용자가 프로세서 내부 ROM에 프로그래밍을 통해 저장할 수 있다. 프로세서 내부의 각 장치는 32 bit 크기의 버스로 연결되어 있어 타원 곡선 암호 규격에 무관하게 동작이 가능하므로 32bit 규격의 입출력 포트만 가지고 있으면 새로운 장치로 교체가 가능한 모듈 구조를 갖고 있다. 따라서 소프트웨어적으로 새로운 마이크로 코드를 프로그래밍하고 하드웨어적으로는 필요한 연산 장치의 교체를 통하여 다양한 타원 곡선 암호 체계에 응용될 수 있다. 본 논문에서는 제안된 프로세서 구조를 이용하여 타원곡선 암호화 프로세서를 구현하였으며 그 결과를 기존의 암호화 프로세서와 비교하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.