• Structural Engineering and Mechanics
• /
• v.83 no.3
• /
• pp.305-326
• /
• 2022

To realize the recycling utilization of waste concrete and alleviate the shortage of resources, 11 specimens of steel reinforced recycled concrete (SRRC) filled circular steel tube columns were designed and manufactured in this study, and the cyclic loading tests on the specimens of columns were also carried out respectively. The hysteretic curves, skeleton curves and performance indicators of columns were obtained and analysed in detail. Besides, the finite element model of columns was established through OpenSees software, which considered the adverse effect of recycled coarse aggregate (RA) replacement rates and the constraint effect of circular steel tube on internal RAC. The numerical calculation curves of columns are in good agreement with the experimental curves, which shows that the numerical model is relatively reasonable. On this basis, a series of nonlinear parameters analysis on the hysteretic behaviors of columns were also investigated. The results are as follows: When the replacement rates of RA increases from 0 to 100%, the peak loads of columns decreases by 7.78% and the ductility decreases slightly. With the increase of axial compression ratio, the bearing capacity of columns increases first and then decreases, but the ductility of columns decreases rapidly. Increasing the wall thickness of circular steel tube is very profitable to improve the bearing capacity and ductility of columns. When the section steel ratio increases from 5.54% to 9.99%, although the bearing capacity of columns is improved, it has no obvious contribution to improve the ductility of columns. With the decrease of shear span ratio, the bearing capacity of columns increases obviously, but the ductility decreases, and the failure mode of columns develops into brittle shear failure. Therefore, in the engineering design of columns, the situation of small shear span ratio (i.e., short columns) should be avoided as far as possible. Based on this, the calculation model on the skeleton curves of columns was established by the theoretical analysis and fitting method, so as to determine the main characteristic points in the model. The effectiveness of skeleton curve model is verified by comparing with the test skeleton curves.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4274-4281
• /
• 2023

Blanket is of vital importance for engineering application of the fusion reactor. Nuclear heat deposition in materials is the main heat source in blanket structure. In this paper, the three-dimensional method for thermal-hydraulics/neutronics coupling analysis is developed and applied for the full-scale module of the helium-cooled ceramic breeder tritium breeding blanket (HCCB TBB) designed for China Fusion Engineering Test Reactor (CFETR). The explicit coupling scheme is used to support data transfer for coupling analysis based on cell-to-cell mapping method. The coupling algorithm is realized by the user-defined function compiled in Fluent. The three-dimensional model is established, and then the coupling analysis is performed using the paralleled Coupling Analysis of Thermal-hydraulics and Neutronics Interface Code (CATNIC). The results reveal the relatively small influence of the coupling analysis compared to the traditional method using the radial fitting function of internal heat source. However, the coupling analysis method is quite important considering the nonuniform distribution of the neutron wall loading (NWL) along the poloidal direction. Finally, the structure optimization of the blanket is carried out using the coupling method to satisfy the thermal requirement of all materials. The nonlinear effect between thermal-hydraulics and neutronics is found during the blanket structure optimization, and the tritium production performance is slightly reduced after optimization. Such an adverse effect should be thoroughly evaluated in the future work.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.53-60
• /
• 2024

Prestressed concrete (PSC) bridges are vulnerable to corrosion and fracture of tendons, and in particular, structures using the internal post-tensioned with grouted system have difficulties in maintenance due to limitations of inspection. In this study, the actual behavior of PSC I girder bridge was analyzed according to tendon damage. The target PSC I girder bridge, an decommissioned highway bridge of upper and lower bridges, had the service period of 33 years and 20 years, respectively. Deflection and concrete strain were measured according to the location of damaged tendon and loading method. Regardless of the age of the bridge, its structural performance decreased when the damaged tendon was closer to the center of the girder. The change in behavior increased as the truck load approached to the girder where the tendon cut. If the load was applied to the adjacent girder where the tendon was cut, the structural performance was likely to be maintained due to the influence of the entire structural system. The change in deflection was difficult to observe visually, while the concrete strain exceeded the cracking strain. Therefore, it is recommended that future monitoring and inspection of PSC I girder bridges should focus on concrete strain or cracking.

• Geotechnical Engineering
• /
• v.12 no.4
• /
• pp.157-178
• /
• 1996

Current design methods for reinforced earth structures take no account of the magnitude of the strains induced in the tensile members as these are invariably manufactured from high modulus materials, such as steel, where straits are unlikely to be significant. With fabrics, however, large strains may frequently be induced and it is important to determine these to enable the stability of the structure to be assessed. In the present paper internal design method of analysis relating to the use of fabric reinforcements in reinforced earth structures for both stress and strain considerations is presented. For the internal stability analysis against rupture and pullout of the fabric reinforcements, a strain compatibility analysis procedure that considers the effects of reinforcement stiffness, relative movement between the soil and reinforcements, and compaction-induced stresses as studied by Ehrlich 8l Mitchell is used. I Bowever, the soil-reinforcement interaction is modeled by relating nonlinear elastic soil behavior to nonlinear response of the reinforcement. The soil constitutive model used is a modified vertsion of the hyperbolic soil model and compaction stress model proposed by Duncan et at., and iterative step-loading approach is used to take nonlinear soil behavior into consideration. The effects of seepage pressures are also dealt with in the proposed method of analy For purposes of assessing the strain behavior oi the fabric reinforcements, nonlinear model of hyperbolic form describing the load-extension relation of fabrics is employed. A procedure for specifying the strength characteristics of paraweb polyester fibre multicord, needle punched non-woven geotHxtile and knitted polyester geogrid is also described which may provide a more convenient procedure for incorporating the fablic properties into the prediction of fabric deformations. An attempt to define improvement in bond-linkage at the interconnecting nodes of the fabric reinforced earth stracture due to the confining stress is further made. The proposed method of analysis has been applied to estimate the maximum tensions, deformations and strains of the fabric reinforcements. The results are then compared with those of finite element analysis and experimental tests, and show in general good agreements indicating the effectiveness of the proposed method of analysis. Analytical parametric studies are also carried out to investigate the effects of relative soil-fabric reinforcement stiffness, locked-in stresses, compaction load and seepage pressures on the magnitude and variation of the fabric deformations.

• Korean Journal of Social Welfare
• /
• v.54
• /
• pp.5-33
• /
• 2003

This study is about the re-validation evaluation of the family Relationship Scale (FRS), developed to measure the family relationship in the social work practice. This study aims at re-validating the FRS, developed and validated in by Yang in 2001 for more general utilization. The sample was married mates and females residing in Seoul. For Face Validity, the content analysis was performed, and the FRS was re-validated in the dimensions of Love & Caring, Acceptance, and Recognition, positive affection, empathy, and autonomy and flexibility for each area. Internal reliability was .93, and internal consistency among three dimensions was 93%. For Empirical Validity, the Construct validity, the Criterion validity, and the Discriminant validity were performed. Construct Validity was validated through factor analyses. Commonalities for the factor analysis was 54%, and the factor loading for each factor was over .45. The confirmative factor analysis also confirmed the fitness of the scale. For Predictive Validity of Criterion Validity, regression analysis showed that the family stress scores became lower as the scores of the family relationship became higher; the discriminant analysis revealed that the family stress turned low ill tile group of high scores of family relationship. The Correlation analysis for Concurrent Validity was performed and the results showed the positive and significant relationship with a couple communication level (r=54) and a parent-child communication level (r=64). Life satisfaction and mental health level also revealed significantly positive correlation to prove Convergent Validity. Physical health level revealed a weak relationship with family relationship providing the evidence of Discriminant Validity. Discriminance was also proved by the analysis of variance with demographics. Thus, Cross Validation was confirmed the validation of the FRS through the various analyses with the married population. This study result improved the validity generalization of the Scale and verify the generalized usage of this sociometric scale in the field of social work practice.

• The Journal of Internal Korean Medicine
• /
• v.19 no.1
• /
• pp.409-427
• /
• 1998

Insamjungchuntang has been used in Korea for many centuries as a treatment for respiratory disease. The effect of Insamjungchuntang on tracheal smooth muscle is not known. The purpose of the present study is to determine the effect of Insamjungchuntang on histamine and acetylcholine induced tracheal smooth muscle contraction in rats and guinea pigs. Guinea pig (500 g, male) and Sprague Dawley rats (200 g, male) were killed by $CO_2$ exposure and a segment (8-10 mm) of the thoracic trachea from each rat and guinea pig was cut into equal segments and mounted 'in pairs' in a tissue bath. Contractile force was measured with force displacement transducers under 0.5 g loading tension. The dose of histamine (His) and acetylcholine (Ach) which evoked 50% of maximal response $(ED_{50})$ was obtained from cumulative dose response curves for histamine and acetylcholine$(10^{-7}{\sim}10^{-4}\;M)$. Contractions evoked by His ($ED_{50}$) and Ach $(ED_{50})$ were inhibited significantly by Insamjungchuntang. In guinea pig tracheal smooth muscle, the mean percent inhibition of acetylcholine induced contraction was $38.58\(p<0.05)\;after\;10{\mu}l/ml$ Insamjungchuntang, $90.75\(p<0.01)\;after\;30{\mu}l/ml$. Insamjungchuntang and $133.17\(p<0.01)\;after\;100{\mu}l/ml$ Insamjungchuntang. In rat tracheal smooth muscle, the mean percent inhibition of acetylcholine induced contraction was $10.0\(p<0.05)\;after\;10{\mu}l/ml$ Insamjungchuntang, $80.71\(p<0.01)\;after\;30{\mu}/ml$ Insamjungchuntang and $118.29\(p<0.01)\;after\;100{\mu}l/ml$ Insamjungchuntang. Also, in guinea pig tracheal smooth muscle, the mean percent inhibition of histamine induced contraction was $45.5\(p<0.01)\;after\;10{\mu}l/ml$ lnsamjungchuntang, and $93.17\(p<0.01)\;after\;30{\mu}l/ml$. lnsamjungchuntang $134.50\(p<0.01)\;after\;100{\mu}l/ml$ Insamjungchuntang. In rat tracheal smooth muscle, the mean percent inhibition of histamine induced contraction was $37.83\(p<0.01)\;after\;10{\mu}l/ml$ lnsamjungchuntang, $90.5\(p<0.01)\;after\;30{\mu}l/ml$ Insamjungchuntang and $135.17\(p<0.01)\;after\;100{\mu}l/ml$ Insamjungchuntang. Propranolol $(10^{-7}\;M)$ slightly but significantly attenuated the inhibitory effects of Insamjungchuntang. Following treatment with propranolol, the mean percent inhibition caused by $100{\mu}l/ml$. Insamjungchuntang fell to 46.42% in guinea pig induced by acetylcholine contraction and by $100{\mu}l/ml$ Insamjungchuntang fell to 5.43% (p<0.05) in rat induced by acetylcholine contraction and the mean percent inhibition caused by $100{\mu}l/ml$ Insamjungchuntang fell to 49.0% in guinea pig induced by histamine contraction and by $100{\mu}l/ml$ Insamjungchuntang fell to 48.6% (p<0.05) in rat induced by histamine contraction. Indomethacin and methylene blue $(10^{-7}\;M)$ did not significantly alter the inhibitory effect of lnsamjungchuntang. Also, I could find the effects of lnsamjungchuntang and Insamjungchuntanggamorphine on the tracheal smooth muscle in guinea pig and rat did not change significantly. These results indicate that Insamjungchuntang can relax histamine and acetylcholine-induced contraction of guinea pig and rat tracheal smooth muscle, and that this inhibition involves sympathetic effects.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.3
• /
• pp.65-75
• /
• 2021

Coin cell is a basic testing platform for battery research, discovering new materials and concepts, and contributing to fundamental research on next-generation batteries. Li metal batteries (LMBs) are promising since a high energy density (~500 Wh kg^-1) is deliverable far beyond Li-ion. However, Li dendrite-triggered volume fluctuation and high surface cause severe deterioration of performance. Given that such drawbacks are strongly dependent on the cell parameters and structure, such as the amount of electrolyte, Li thickness, and internal pressure, reliable Li metal coin cell testing is challenging. For the LMB-specialized coin cell testing platform, this study suggests the optimal coin cell structure that secures performance and reproducibility of LMBs under stringent conditions, such as lean electrolyte, high mass loading of NMC cathode, and thinner Li use. By controlling the cathode/anode (C/A) area ratio closer to 1.0, the inactive space was minimized, mitigating the cell degradation. The quantification and imaging of inner cell pressure elucidated that the uniformity of the pressure is a crucial matter to improving performance reliability. The LMB coin cells exhibit better cycling retention and reproducibility under higher (0.6 MPa → 2.13 MPa) and uniform (standard deviation: 0.43 → 0.16) stack pressure through the changes in internal parts and introducing a flexible polymer (PDMS) film.

• Journal of Korean Medical classics
• /
• v.9
• /
• pp.432-552
• /
• 1996

The influence of the four noted physicians of Geum-Won era(金元代) on the completion of the medicine in the Chosun dynasty(朝鮮朝) can be summarized as follows. 1. The four noted physicians of Geum-Won era were Yoo-Wan-So(劉完素), Jang-Jong-Jung(張從正), Lee-Go(李杲), Ju-Jin-Heung(朱震亨). 2. Yoo-Wan-So(劉完索) made his theory on the basic of Nae-Kyung("內經") and Sane-Han-Lon("傷寒論"), his idea of medicine was characterized in his books, for exemple, application of O-Oon-Yuk-Ki(五運六氣), Ju-Wha theory(主火論) and hang-hae-seng-je theory(亢害承制論). from his theory and method of study, many deviations of oriental medicine occurred. He made an effort for study of Nae-Kyung, which had been depressed for many years, on the contrary of the way old study that Nae-Kyung had been only explained or revised, he applied the theory of Nae-Kyung to clinical care. The theory of Yuk-Gi-Byung-Gi(六氣病機) and On-Yeul-Byung(溫熱病) had much influenced on his students and posterities, not to mention Jang-Ja-Wha and Ju-Jin-Heung, who were among the four noted physicians therefore he became the father of Yuk-Gi(六氣) and On-Yeul(溫熱) schools. 3. Jang-Jong-Jung(張從正) emulated Yoo-Wan-So as a model, and followed his Yuk-Gi-Chi-Byung(六氣致病) theory, but he insisted on the use of the chiaphoretic, the emetic and the paregoric to get rid of the causes, specially he insisted on the use of the paregoric, so they called him Gong-Ha-Pa(攻下派). He insisted on the theory that if we would strenthen ourselves we should use food, id get rid of cause, should use the paregoric, emetic and diaphoretic. Jang-Jong-Jung'S Gang-Sim-Wha(降心火) theory, which he improved Yoo-Wan-So's Han-Ryang(寒凉) theory influenced to originate Ju-Jin-Heung'S Ja-Eum-Gang-Wha(滋陰降火) theory. 4. Lee-Go(李杲) insisted on the theory that Bi-Wi(脾胃) played a loading role in the physiological function and pathological change, and that the internal disease was originated by the need of Gi(氣) came from the disorder of digestive organs, and that the causes of internal disease were the irregular meal, the overwork, and mental shock. Lee-Go made an effort for study about the struggle of Jung-Sa(正邪) and in the theory of the prescription he asserted the method of Seung-Yang-Bo-Gi(升陽補氣), but he also used the method of Go-Han-Gang-Wha(苦寒降火). 5. The authors of Eui-Hak-Jung-Jun("醫學正傳"), Eui-Hak-Ib-Moon("醫學入門"), and Man-Byung-Whoi-Choon("萬病回春") analyzed the medical theory of the four noted physicians and added their own experiences. They helped organizing existing complicated theories of the four noted physicians imported in our country, and affected the formation of medical science in the Choson dynasty largely. Eui-Hak-Jung-Jun("醫學正傳") was written by Woo-Dan(虞槫), in this book, he quoted the theories of Yoo-Wan-So, Jang-Jong-Jung, Lee-Go, Ju-Jin-Heung, especially, Ju-Jin-Heung was respected by him, it affected the writing of Eui-Lim-Choal-Yo("醫林撮要"). Eui-Hak-ib-Moon("醫學入門"), written by Lee-Chun(李杲), followed the medical science of Lee-Go and ju-jin-heung from the four noted physicians of Geum-Won era. Its characteristics of Taoism, idea of caring of health, and organization affected Dong-Eui-Bo-Kham("東醫寶鑑"). Gong-Jung-Hyun(龔延賢) wrote Man-Byung-Whoi-Choon("萬病回春") using the best part of the theories of Yoo-Wan-So, Jang-Jong-Jung, Lee-Go, Ju-Jin-Heung, this book affected Dong-Eui-Soo-Se-Bo-Won("東醫壽世保元") partly. 6. our medical science was developed from the experience of the treatment of disease obtained from human life, these medical knowledge was arranged and organized in Hyang-Yak-Jib-Sung-Bang("鄕藥集成方"), medical books imported from China was organized in Eui-Bang-Yoo-Chwi("醫方類聚"), which formed the base of medical development in the Chosun dynasty. 7. Eui-Lim-Choal-Yo("醫林撮要") was written by Jung-Kyung-Sun(鄭敬先) and revised by Yang-Yui-Soo(楊禮壽). It was written on the base of Woo-Dan's Eui-Jung-Jun, which compiled the medical science of the four noted physicians of Geum-Won era. It contained confusing theories of the four noted physicians of Geum-Won era and organized medical books of Myung era, therefore it completed the basic form of Byun-Geung-Non-Chi (辨證論治) influenced the writing of Dong-Eui-Bo-Kham("東醫寶鑑"). 8. Dong-Eui-Bo-Kham("東醫寶鑑") was written on the base of basic theory of Eum-Yang-O-Haeng(陰陽五行) and the theory of respondence of heaven and man(天人相應說) in Nae-Kyung. It contained several theories and knowledge, such as the theory of Essence(精), vitalforce(氣), and spirit(神) of Taoism, medical science of geum-won era, our original medical knowledge and experience. It had established the basic organization of our medical science and completed the Byun-Geung-Non-Chi (辨證論治). Dong-Eui-Bo-Kham developed medical science from simple medical treatment to protective medical science by caring of health. And it also discussed human cultivation and Huh-Joon's(許浚) own view of human life through the book. Dong-Eui-Bo-Kham adopted most part of Lee-Go(李杲) and Ju-Jin-Heung's(朱震亨) theory and new theory of "The kidney is the basis of apriority. The spleen is the basis of posterior", so it emphasized the role of spleen and kidney(脾腎) for Jang-Boo-Byung-Gi(臟腑病機). It contained Ju-Jin-Heung's theory of the cause and treatment of disease by colour or fatness of man(black or white, fat or thin). It also contained Ju-Jin-Heung's theory of "phlegm break out fever, fever break out palsy"(痰生熱 熱生風) and the theory of Sang-Wha(相火論). Dong-Eui-Bo-Kham contained Lee-Go's theory of Wha-Yu-Won-Bool-Yang-Lib (火與元氣不兩立論) quoted the theory of Bi-Wi(脾胃論) and the theory of Nae-Oi-Sang-Byun(內外傷辨). For the use of medicine, it followed the theory by Lee-Go. lt used Yoo-Wan-So'S theory of Oh-Gi-Kwa-Keug-Gae-Wi-Yul-Byung(五志過極皆爲熱病) for the treatment of hurt-spirit(傷神) because fever was considered as the cause of disease. It also used Jang-Jons-Jung's theory of Saeng-Keug-Je-Seung(生克制勝) for the treatment of mental disease. 9. Lee-je-ma's Dong-Eui-Soo-Se-Bo-Won("東醫壽世保元") adopted medical theories of Song-Won-Myung era and analyzed these theories using the physical constitutional theory of Sa-Sang-In(四象人). It added Dong-Mu's main idea to complete the theory and clinics of Sa-Sang-Eui-Hak(四象醫學). Lee-Je-Ma didn't quote the four noted physicians of Geum-Won era to discuss that the physical constitutional theory of disease and medicine from Tae-Eum-In(太陰人), So-Yang-In(少陽人), So-Eum-In(少陰人), and Tae-Yang-In(太陽人) was invented from their theories.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.4
• /
• pp.223-231
• /
• 2012

The purpose of this study is to investigate basically the mechanism of heat transfer by the resolution of complex fluid flow inside a sophisticated designed screw dryer for the treatment of sewage sludge by using numerical analysis and experimental study. By doing this, the result was quite helpful to obtain the design criteria for enhancing drying efficiency, thereby achieving the optimal design of a multiple screw type dryer for treating inorganic and organic sludge wastes. One notable design feature of the dryer was to bypass a certain of fraction of the hot combustion gases into the bottom of the screw cylinder, by the fluid flow induction, across the delicately designed holes on the screw surface to agitate internally the sticky sludges. This offers many benefits not only in the enhancement of thermal efficiency even for the high viscosity material but also greater flexibility in the application of system design and operation. However, one careful precaution was made in operation in that when distributing the hot flue gas over the lump of sludge for internal agitation not to make any pore blocking and to avoid too much pressure drop caused by inertial resistance across the lump of sludge. The optimal retention time for rotating the screw at 1 rpm in order to treat 200 kg/hr of sewage sludge was determined empirically about 100 minutes. The corresponding optimal heat source was found to be 150,000 kcal/hr. A series of numerical calculation is performed to resolve flow characteristics in order to assist in the system design as function of important system and operational variables. The numerical calculation is successfully evaluated against experimental temperature profile and flow field characteristics. In general, the calculation results are physically reasonable and consistent in parametric study. In further studies, more quantitative data analyses such as pressure drop across the type and loading of drying sludge will be made for the system evaluation in experiment and calculation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.3
• /
• pp.138-147
• /
• 2007

An emergy concept was used to evaluate the environment and economy of the Han River basin in Korea and to suggest policy perspectives far the sustainable utilization of its environment and associated estuarine ecosystem. The economy of the basin used $5.19{\times}10^{23}\;sej/yr$ of emergy in 2005. The economy of the Han River basin was heavily dependent on outside energy sources from foreign countries and other parts of Korea, with internal sources, renewable and nonrenewable, contributing only 15.6% to the total emergy use. The basin's trade balance in terms of emergy showed trade surplus, whereas there was a deficit in monetary terms. The population of the Han River basin was far greater than the carrying capacity calculated using the emergy flow, with renewable carrying capacity only at 1.8% of the basin's population and developed carrying capacity at 14.3%. The economy of the basin imposed a substantial stress on its environment, with an environmental loading ratio of 54.8. Overall, the economy of the Han River basin was not sustainable with an emergy sustainability of 0.02. These are reflected in lower quality of living expressed in the emergy term than the national average. Deconcentration of population and economic activities is needed to reduce environmental stress on the environment of the basin and its valuable estuarine ecosystem. Policies to restore ecosystem productivity of the basin are also needed to ensure the sustainability of the basin's economic activities and the sustainable utilization of the Han River estuary. In this regard, it is urgently needed for the Korean government to implement sustainable management measures for the Han River estuary, a well-preserved, productive natural estuarine ecosystem in Korea.