• The KIPS Transactions:PartC
• /
• v.10C no.1
• /
• pp.71-76
• /
• 2003

Internet traffic is getting tremendously heavier due to the exponential growth of the Internet users, the spread of the E-commerce and the network games. High-speed routers for fast packet forwarding are commercially available to satisfy the growing bandwidth. A high-speed router, which has the decentralized multiprocessing architecture for IP and routing functions, consists of host processors, line interfaces and switch fabrics. In this paper, we propose a software architecture tuned for high-speed non-forwarding packet manipulation. IPCMP (Inter-Processor Communication Message Protocol), which is a mechanism for IPC (Inter-Processor Communication), is also proposed and implemented as well. Proposed IPC mechanism results in faster packet-processing rate by 10% as compared to the conventional IPC mechanism using UDP/IP.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.660-665
• /
• 2006

This paper presents a finite element method to analyze the free and forced vibration of a hard disk drive (HDD) considering the flexibility of a spinning disk-spindle with fluid dynamic bearings (FDBs), an actuator with pivot bearings, an air bearing between head-disk interface and the base with complicated geometry. Finite element equation of each component is consistently derived with the satisfaction of the geometric compatibility of the internal boundary between each component. The spinning disk, hub and FDBs are modeled by annular sector elements, beam elements and stiffness and damping elements, respectively. The actuator am, E-block, suspension and base plate are modeled by tetrahedral elements. The pivot bearing in the actuator and the air bearing between head-disk interfaces are modeled by the stiffness element with five degrees of freedom and the axial stiffness, respectively. A global matrix equation obtained by assembling the finite element equations of each substructure is transformed to a state-space matrix-vector equation, and both damped natural frequencies and modal damping ratios are calculated by solving the associated eigenvalue problem with the restarted Arnoldi iteration method. Modal and shock testing are performed to show that the proposed method well predicts the vibration characteristics of a HDD.

• Journal of the Korean Ceramic Society
• /
• v.43 no.5 s.288
• /
• pp.270-276
• /
• 2006

LSGM(($La_xSr_{1-x})(Ga_yMg_{1-y})O_3$) electrolyte is known to show very serious interfacial reaction with other unit cell components, especially with an anode. Such an interfacial reaction induced the phase instability of constituent component and deterioration of the unit cell performance, which become the most challenging issues in LSGM-based SOFCs. In this study, we fabricated LSGM($La_{0.8}Sr_{0.2}Ga_{0.83}Mg_{0.17}O_x$) electrolyte supported-type cell in order to avoid such interfacial problem by lowering the heat-treatment temperature of the electrode fabrication. According to the microstructural and phase analysis, there was no serious interfacial reaction at both electrolyte/anode and electrolyte/cathode interfaces. Moreover, from the electrochemical characterization of the unit cell performance, there was no distinct deterioration of the open cell voltage as well as an internal cell resistance. These results demonstrate the most critical point to be concerned in LSGM-based SOFC is either to find a proper electrode material which will not give any interfacial reaction with LSGM electrolyte or to properly adjust the processing variables for unit cell fabrication, to reduce the interfacial reaction.

• The Journal of Information Systems
• /
• v.12 no.1
• /
• pp.159-175
• /
• 2003

During the early stage of radioactive disposal programs, important issues related with quality assurance of data sets, methodologies, R&D procedures are recognized as important ones. This paper focused on the development of web-based workflow standards for the QA procedures of the radioactive waste disposal programs. The flow of process was analyzed based on workflow concepts proposed by the Workflow Management Coalition (WfMC). QA system is based on the principles of T2R3. T2R3 Workflow was used to standardize and restructure the business and/or work process in the industry or organization. The WfMC has identified five functional interfaces to a workflow service as part of its standardization program. They are composed of process definition interface, worklist handler, application program interface, interface between workflows, and system management. The task flow and QA program were defined based on the workflow ideas. QA procedures for the R&D results of radiation disoposal were analyzed following the reference model of workflow. In addition, six program run list were created and implemented. The creation, revision, and approval of the test data were designed to be inplemented on the web environment. Through this system, R&D procedures such as planning, research, documentation, internal review and future independent peer review processes could be well organized and stored more systematically on the database and knowledge base. This will encourage the usage and data sharing between interested parties through it's clear and transparent workflow standards.

• Journal of the Korea Concrete Institute
• /
• v.17 no.6 s.90
• /
• pp.885-892
• /
• 2005

Recently, the damaged concrete structures are often strengthened or repaired using the polymer concrete or the polymer cement mortar. In the repaired concrete structures at early ages, internal stresses could be developed due to the differential drying shrinkage of the repair material. Due to the difference of the thermal coefficients of the repair material and existing concrete, additional stresses also could be developed as the structures are subjected to the ambient temperature changes. Theses environmentally-induced stresses can sometimes be large enough to cause damage to the structures, such as debonding of the interface between the two materials. In this study, a rational procedure was developed where anchors can be designed and installed to prevent damages in such structures by thermally-induced stresses. Finally, through the experimental study and numerical study, the effects of the repair method using anchors with debonding was investigated and discussed the results.

• Journal of Korea Game Society
• /
• v.16 no.4
• /
• pp.69-78
• /
• 2016

With the development of game technology, the realistic game graphics, interface technology, and various content services with immersion are being required in the content area. NUI has been developed through CLI and GUI. Unlike the conventional methods, it is an interface that could be the intuitive and realistic interface for human as a natural action realized. we propose a boxing simulation game using leap motion of it. Providing a realistic 3D experimental environment through VR headsets game, we also propose a method that can be calculated the scores if the user-controlled interface (fist) could be to punch the target (sandbag) of the internal in accordance with changes of the angle of target impact with the physical characteristics.

• Journal of Global Scholars of Marketing Science
• /
• v.16 no.4
• /
• pp.13-38
• /
• 2006

This study is concerned with the factors that influence the radicalness of new product development by firms. The innovativeness of firms' new product development differs in their frequency and radicalness. Based on previous research on product innovations, this study provides a hypothetical model that links firms' internal variables and external relations variables to the radicalness of product innovation, which in turn is linked to marketing performance. For an empirical analysis, the data were collected from South Korean firms. The result of this study provides evidence that the stronger is firms' management attitude toward risk taking, marketing competency, and technical competency, the higher is the possibility of radical product innovation. It also shows that, contrarily to the hypothesis, firms with collective reward system rather than individual reward system are more likely to develop radically new products. This study also shows that the better are firms' R & D collaboration with suppliers and interfaces with customers, the higher is the possibility of radical product innovation.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_2
• /
• pp.247-255
• /
• 2022

Robot Process Automation (RPA) is a computer technology called Robotic Process Automation, a form of business process automation based on the concept of software robots or artificial intelligence (AI) walkers. In general, in traditional workflow automation tools, software developers design software that creates a set of actions to automate tasks and interfaces for the back-end systems using internal APIs or dedicated script languages. However, in RPA software, automation can be implemented by configuring an operating processor as if the general user is directly performing the task of the application. In other words, it can be said that it is a suitable development method for automating simply repetitive tasks rather than developing specific programs in which all necessary functions are implemented, as in general software development. Thus, this is more appropriate for configuring and automating RPA software in traditional manufacturing companies that are not easy to develop and apply smart factories or high-end AI software. Therefore, this research aims to analyze the requirements required at the actual manufacturing companies, focusing on the manufacturer's case in Changwon, Gyeongsangnam-do, called SinceWin Co., Ltd., and to examine the possibility of RPA software in the manufacturing companies by implementing actual RPA software that supports office automation. Through the research, it was confirmed that the actually implemented RPA software met the requirements of the company and helped manufacturer practice significantly by automating the parts that were worked error-prone and manually periodically.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.1
• /
• pp.23-35
• /
• 2023

Korea Augmentation Satellite System (KASS) is a satellite-based augmentation system (SBAS) that provides approach procedure with vertical guidance-I (APV-I) level corrections and integrity information to Korea territory. KASS is used to monitor navigation performance in real-time, and this paper introduces the design, implementation, and verification process of mission monitoring (MIMO) in KASS. MIMO was developed in compliance with the Minimum Operational Performance Standards of the Radio Technical Commission for Aeronautics for Global Positioning System (GPS)/SBAS airborne equipment. In this study, the MIMO system was verified by comparing and analyzing the outputs of reference tools. Additionally, the definition and derivation method of accuracy, integrity, continuity, and availability subject to MIMO were examined. The internal and external interfaces and functions were then designed and implemented. The GPS data pre-processing was minimized during the implementation to evaluate the navigation performance experienced by general users. Subsequently, tests and verification methods were used to compare the obtained results based on reference tools. The test was performed using the KASS dataset, which included GPS and SBAS observations. The decoding performance of the developed MIMO was identical to that of the reference tools. Additionally, the navigation performance was verified by confirming the similarity in trends. As MIMO is a component of KASS used for real-time monitoring of the navigation performance of SBAS, the KASS operator can identify whether an abnormality exists in the navigation performance in real-time. Moreover, the preliminary identification of the abnormal point during the post-processing of data can improve operational efficiency.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.91-98
• /
• 2010

This study proposes a monitoring system that effectively watches surroundings by cooperating the various sensor information including image information on a sensor network system. The monitoring system proposed in this paper is developed to watch certain intruders to the internal spaces through the interested region for exceptional time by installing cameras, PIR(Pyroelectric Infrared Ray) sensor and body detectors in such interested regions. Moreover the monitering system is implemented based on the SenWeaver plateform which is a integrated development tools for building wireless sensor network system. In the results of the test that was applied to a practically experimental environment by implementing some interfaces for the proposed system, it was considered that it is possible to watch surroundings effectively using the image information obtained from cameras and multiple sensor information acquisited from sensor nodes.