• 한국기계가공학회지
• /
• 제19권6호
• /
• pp.49-54
• /
• 2020

The purpose of this study is to investigate the effects of the change in the spindle speed and the feed rate on the diameter change of a hole using a boring cutter for the internal boring process of AL6061-T4 alloys. The experimental results are quantitatively analyzed by applying the factor analysis and the response surface analysis of the experimental design method. The tendency of the diameter change according to the change in the spindle speed and feed level is also evaluated. During the internal boring process of AL6061-T4 alloys, the main factor affecting the diameter change is the spindle speed in which the diameter decreases as the number of revolutions increases. In addition, the diameter tends to increase as the feed is increased; however, as the number of spindle revolutions increases, the influence of the feed decreases.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권6호
• /
• pp.241-254
• /
• 2020

As environmental concerns continue to grow, green supply chain management (GSCM) is attracting attention as an element of competitive advantage for companies. This study examined internal GSCM practices to show how they influenced the end-point of the supply chain from the perspective of the end-consumer. It identified the effects of environmental concerns on consumer purchasing behavior mediated by the company image of internal GSCM practices. Data were collected through an email survey of Korean consumers. Reliability and validity were verified using SPSS 18.0. Cronbach's alpha, and confirmatory factor analysis. The results showed that environmental concerns had a positive impact on such practices, and the image of internal GSCM practices was found to have a significantly positive effect on consumer purchasing behavior. Companies will have to actively reflect environmental factors in their operational activities, and GSCM implementation will become a necessity. A positive image of internal environmental management and eco-design, which are key elements of internal GSCM practices, strengthened the company's eco-friendly image and ultimately affected consumer purchasing behavior. This suggests that it is important for companies to evaluate their environmental attitude and make eco-friendly products from a consumer's perspective, making it a differentiation strategy for a company in building an eco-friendly corporate image.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.126-133
• /
• 2008

Geotechnical limit state design methods; LRFD of North America is an approach that estimates resistance using design model and then multiplies resistance factor by calculated resistance to reflect the uncertainty of geomaterials and design models; whereas, Eurocode of the Europe employs the partial resistance factor applied directly to each variable in the resistance equation that individual soil properties such as cohesion and angle of internal friction are applied. This discussion paper is a study on characteristic value which has globally been argued through processing of development of Eurocode 7 for geotechnical design even to the present. Estimating the characteristic value of soil properties affects not only determination of design value applied directly to design of geotechnical structures, but also economic feasibility and stability of the structures.

• Nuclear Engineering and Technology
• /
• 제31권3호
• /
• pp.257-266
• /
• 1999

A simplified statistical methodology is developed in order to both reduce over-conservatism of deterministic methodologies employed for PWR fuel rod internal pressure (RIP) calculation and simplify the complicated calculation procedure of the widely used statistical methodology which employs the response surface method and Monte Carlo simulation. The simplified statistical methodology employs the system moment method with a deterministic approach in determining the maximum variance of RIP The maximum RIP variance is determined with the square sum of each maximum value of a mean RIP value times a RIP sensitivity factor for all input variables considered. This approach makes this simplified statistical methodology much more efficient in the routine reload core design analysis since it eliminates the numerous calculations required for the power history-dependent RIP variance determination. This simplified statistical methodology is shown to be more conservative in generating RIP distribution than the widely used statistical methodology. Comparison of the significances of each input variable to RIP indicates that fission gas release model is the most significant input variable.

• 제어로봇시스템학회논문지
• /
• 제12권12호
• /
• pp.1209-1214
• /
• 2006

This paper presents an application of Dividing Wall Column(DWC) to the recovery of the waste solvent from the film making processes. The waste solvent feed contains MEK(Methyl-Ethyl-Ketone), Toluene, Cyclohexanone, and water. The commercial software $HYSYS^{TM}$ was used for rigorous simulation and analysis. Sensitivity analysis for several major design variables were carried out to achieve the optimal design of the process. Distribution of the internal vapor and liquid flows to the prefractionator and main sections is shown to be the most dominant design factor for energy saving efficiency in the DWC process. The simulation results also show that the solvent recovery process using the DWC significantly improves both the energy efficiency and the compactness of the solvent recovery process.

• 한국자동차공학회논문집
• /
• 제10권1호
• /
• pp.244-254
• /
• 2002

To enhance the acceleration performance and fuel consumption rate of a vehicle, the torque converter is modified or newly-developed with reliable analysis model. Up to recently, the one dimensional performance model has been used for the analysis and design of torque converter. The model is described with constant parameters based on the concept of mean flow path. When it is used in practice, some experiential correction factors are needed to minimize tole estimated error. These factors have poor physical meaning and cannot be applied confidently to the other specification of torque converter. In this study, the detail dynamic model of torque converter is presented to establish the physical meaning of correction factors. To verify the validity of model, performance test was carried out with various input speed and oil temperature. The effect of oil temperature on the performance is analysed, and it is applied to the dynamic model. And, to obtain the internal flow pattern of torque converter, CFD(Computational Fluid Dyanmics) analysis is carried out on three-dimensional turbulent flow. Correction factors are determined from the internal flow pattern, and their variation is presented with the speed ratio of torque converter. Finally, the sensitivity of correction factors to the speed ratio is studied for the case of changing capacity factor with maintaining torque ratio.

• 패션비즈니스
• /
• 제13권5호
• /
• pp.66-80
• /
• 2009

The main purpose of this research is to investigate the present circumstances of internal marketing in domestic apparel-import company and study if the internal marketing activities in import apparel company have a significant effect on salespersons' job satisfaction. As a preliminary investigation, the interviews with 6 expert salespersons of imported apparel company were taken to develop a practical measuring tool. As a result, 21 categories which effect on internal marketing and 6 factors which influence on job satisfaction were extracted. Next, a survey with the salespersons who work in apparel-import company was taken, and 186 collected data were used in this study. To analyze the data, factor analysis, frequency analysis, and multiple regression analysis are executed by a statistics package, SPSS v12.0. The results are as follows. First, five factors which effect on internal marketing activities in have been identified as welfare, incentives, employment & training, communication, empowerment. Among them, four factors of welfare, incentives, employment & training, and communication have been come out as statistically significant factors which influenced on salesperson's job satisfaction. Second, the internal marketing activities of import apparel company according to salesperson's demographic factors - payment, working periods, and marriage have been demonstrated significant difference on salespersons' job satisfaction. When the marriage is examined, the job satisfaction of the single mostly depends on incentives while that of the married does on welfare. On the consideration of working periods, the less does the group have working experience, the more does it have a dependence on incentives. On the other hand, the group which has much payment and experience mostly relies on welfare. The middle class show to be dependent on communication and employment&training as well as welfare and incentives.

• 전력전자학회논문지
• /
• 제12권5호
• /
• pp.409-415
• /
• 2007

본 논문에서는 필터 설계시 고려해야 될 주요 항목 중 하나인 성능인자 권장값을 만족시키기 위해 단극 발전기의 내부인자 값을 필터 설계에 반영하는 새로운 평활필터 설계방법을 제안한다. 이 방법은 감쇄용 저항을 배제시킴으로서 평활필터의 효율증대 및 소형화를 기한다. 그리고 성능인자와 함께 공진주파수도 함께 고려함으로서 부성저항 특성을 갖는 고승압 변환기 등을 적용한 시스템의 안정성을 증대시킨다.

• Structural Engineering and Mechanics
• /
• 제66권1호
• /
• pp.97-111
• /
• 2018

Cracking can lead to unexpected sudden failure of normally ductile metals subjected to a tensile stress, especially at elevated temperature. This article is raised to study the application of a composite material instead of the traditional carbon steel material used in the natural gas transmission pipeline because the cracks occurs in the pipeline initiate at its internal surface which is subjected to internal high fluctuated pressure and unsteady temperature according to actual operation conditions. Functionally graded material (FGM) is proposed to benefit from the ceramics durability and its surface hardness against erosion. FGM properties are graded at the radial direction. Finite element method (FEM) is applied and solved by ABAQUS software including FORTRAN subroutines adapted for this case of study. The stress intensity factor (SIF), temperatures and stresses are discussed to obtain the optimum FGM configuration under the actual conditions of pressure and temperature. Thermoelastic analysis of a plane strain model is adopted to study SIF and material response at various crack depths.

• 한국유체기계학회 논문집
• /
• 제11권1호
• /
• pp.52-60
• /
• 2008

Staggered dimples printed on opposite walls of an internal cooling channel are formulated numerically and optimized to enhance heat transfer performance. Nusselt number and friction factor based objectives are considered and a weighted average surrogate model is used to approximate the data generated by numerical simulation. The dimpled channel shape is defined by three geometric design variables, and the design point within design space are selected using Latin hypercube sampling. A weighted-sum method for multi-objective optimization is applied to integrate multiple objectives into a single objective. By the optimization, the objective function value is improved largely and heat transfer rate is increase much higher than pressure loss increase due to shape deformation. Channel with vertically non-symmetric optimum dimples is tested and found that the best appears if dimples on opposite wall are displaced by one quarter of dimple spacing.