• Journal of Yeungnam Medical Science
• /
• 제31권2호
• /
• pp.122-126
• /
• 2014

Coronary vasospasm is one of the fatal complications that may occur in patients undergoing open heart surgery. To date, however, there are not many cases in this series and no definite pathophysiology has been documented. We experienced a case of coronary artery vasospasm after atrial septal defect (ASD) surgery and then successfully treated it with both transbrachial intraaortic balloon pump and percutaneous cardiopulmonary support. Only several hours after ASD surgery, the patient exhibited the cardiovascular collapse, the ST-segment elevation, followed by ventricular fibrillation and normal coronary angiography findings. It is important to make a differential diagnosis of coronary artery vasospasm in patients presenting with ST-segment elevation who had no notable coronary artery diseases. This case indicates that clinicians should be aware of the possibility that the coronary artery vasospasm may also occur in patients undergoing ASD surgery.

• Computers and Concrete
• /
• 제33권5호
• /
• pp.481-496
• /
• 2024

Internal erosion around pipes can lead to the failure of earth dams through various mechanisms. This study investigates the displacement patterns in earth dam models under three different failure modes due to internal erosion, using digital image correlation (DIC) methods. Three failure modes—erosion along a pipe (FM1), pipe leakage leading to soil erosion (FM2), and erosion in a pipe due to defects (FM3)—are analyzed using two- and three-dimensional image- processing techniques. The internal displacement of the cross-sectional area and the surface displacement of the downstream slope in the dam models are monitored using an image acquisition system. Physical model tests reveal that FM1 exhibits significant displacement on the upper surface of the downstream slope, FM2 shows focused displacement around the pipe defect, and FM3 demonstrates increased displacement on the upstream slope. The variations in internal and surface displacements with time depend on the segmented area and failure mode. Analyzing the relationships between internal and surface displacements using Pearson correlation coefficients reveals various displacement patterns for the segmented areas and failure modes. Therefore, the image-based characterization methods presented in this study may be useful for analyzing the displacement distribution and behavior of earth dams around pipes, and further, for understanding and predicting their failure mechanisms.

• 한국전자통신학회논문지
• /
• 제15권1호
• /
• pp.101-106
• /
• 2020

본 연구는 다양한 어셈블리 부품의 용접부 내부결함을 검사하기 위한 초음파 탐상 장비 개발에 관한 것이다. 본 연구에서는 초음파 탐상을 위하여 시스템의 모션제어 S/W, 초음파 송수신기 제어, 결함 판정 기준 설정 등의 계측 S/W 등이 설계되었으며, 양품과 불량품의 비교분석을 하기 위하여 용접결함 불량품 샘플워크 등도 제작되었다. 이와 같은 구성으로 이루어진 시스템을 통하여 어셈블리 부품 용접부의 결함 위치 및 깊이에 대한 자동검사 기능을 수행할 수 있었으며, 종전에 전문가에 의해 이루어졌던 용접부의 내부결함에 대한 판단을 시스템이 수행하도록 하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권2호
• /
• pp.865-882
• /
• 2017

To improve passenger convenience and safety, today's vehicle is evolving into a "connected vehicle," which mounts various sensors, electronic control devices, and wired/wireless communication devices. However, as the number of connections to external networks via the various electronic devices of connected vehicles increases and the internal structures of vehicles become more complex, there is an increasing chance of encountering issues such as malfunctions due to various functional defects and hacking. Recalls and indemnifications due to such hacking or defects, which may occur as vehicles evolve into connected vehicles, are becoming a new risk for automakers, causing devastating financial losses. Therefore, automakers need to make voluntary efforts to comply with security ethics and strengthen their responsibilities. In this study, we investigated potential security issues that may occur under a connected vehicle environment (vehicle-to-vehicle, vehicle-to-infrastructure, and internal communication). Furthermore, we analyzed several case studies related to automaker's legal risks and responsibilities and identified the security requirements and necessary roles to be played by each player in the automobile development process (design, manufacturing, sales, and post-sales management) to enhance their responsibility, along with measures to manage their legal risks.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.370-376
• /
• 2005

Magnesium alloys are becoming important material for light weight car body, due to their low specific density but high specific strength. However they have a poor weldability, caused high oxidization tendency and low vapor temperature. In this study, the welding performance of magnesium alloys was investigated for automobile application. The materials were rolled magnesium alloy sheet contains Al and Zn such as AZ3l , AZ6l and AZ9l. Three types of welding process were studied, that were GTAW, Laser beam welding and FSW. To evaluate the weldability, we examined the appearance of welding bead. Also we checked bead shape and internal defects such as crack and porosity on cross section of welding bead. The mechanical property was measured for welded specimen by tensile test. For determination of the strength change by welding process, the hardness profile across the welding center was measured. For the results, the tensile properties of welded specimen were decreased obviously on all welding process. For the fusion welding process such as GTAW and laser beam welding, the surface of the welding bead was covered with oxidized magnesium dust but it was removed by simple cleaning work as wipe-out with tissue. Also under cut, that caused vaporization of base metal was occurred. for the friction stir welding, there was no oxidation, under-cut or internal defects. However it had poor weld performance, the reason was cleavage fracture occurred at plastic deformation zone. For welding of magnesium alloy, the laser beam welding process was recommended.

• 산업경영시스템학회지
• /
• 제38권1호
• /
• pp.44-51
• /
• 2015

When manufacturing die casting mold, generally, the casting layout design should be considered based on the relations of injection system, casting condition, gate system, and cooling system. According to the various relations of the conditions, the location of product defects was differentiated. High-qualified products can be manufactured as those defects are controlled by the proper modifications of die casting mold with keeping the same conditions. In this research, Computer Aided Engineering (CAE) simulation was performed with the several layout designs in order to optimize the casting layout design of an automotive part (Housing). In order to apply them into the production die-casting mold, the simulation results were analyzed and compared carefully. With the filling process, internal porosities caused by air entrapments were predicted and also compared with the modification of the gate system and overflow. With the solidification analysis, internal porosities occurring during the solidification process were predicted and also compared with the modified gate system. The simulation results were also applied into the production die-casting mold in order to compare the results and verify them with the real casting samples.

• Journal of Animal Science and Technology
• /
• 제64권5호
• /
• pp.813-829
• /
• 2022

Internal and external defects of eggs should be detected to prevent cross-contamination of intact eggs by abnormal eggs during storage. Emerging detection technologies for abnormal eggs were introduced as an alternative to human inspection. The advanced technologies could rapidly detect abnormal eggs. Abnormal egg detection technologies using acoustic response, machine vision, and spectroscopy have been commercialized in the poultry industry. Non-destructive egg quality assessment methods meanwhile could preserve the value of eggs and improve detection efficiency. In order to improve detection efficiency, it is essential to select a proper algorithm for classifying the types of abnormal eggs. This review deals with the performance of the detection technologies for various types of abnormal eggs in recently published resources. In addition, the discriminant methods and detection algorithms of abnormal eggs reported in the published literature were investigated. Although the majority of the studies were conducted on a laboratory scale, the developed detection technologies for internal and external defects in eggs were technically feasible to obtain the excellent detection accuracy. To apply the developed detection technologies to the poultry industry, it is necessary to achieve the detection rates required from the industry.

• Nuclear Engineering and Technology
• /
• 제56권6호
• /
• pp.2412-2420
• /
• 2024

The International Atomic Energy Agency (IAEA) mandates safeguards to ensure non-proliferation of nuclear materials. Among inspection techniques used to detect partial defects within spent nuclear fuel (SNF), gamma emission tomography (GET) has been reported to be reliable for detection of partial defects on a pin-by-pin level. Conventional GET, however, is limited by low detection efficiency due to the high density of nuclear fuel rods and self-absorption. This paper proposes a new type of GET named Spent Fuel Internal Tomography (SFIT), which can acquire sinograms at the guide tube. The proposed device consists of the housing, shielding, C-shaped collimator, reflector, and gadolinium aluminum gallium garnet (GAGG) scintillator. For accurate attenuation correction, the source-distinguishable range of the SFIT device was determined using MC simulation to the region away from the proposed device to the second layer. For enhanced inspection accuracy, a proposed specific source-discrimination algorithm was applied. With this, the SFIT device successfully distinguished all source locations. The comparison of images of the existing and proposed inspection methods showed that the proposed method, having successfully distinguished all sources, afforded a 150 % inspection accuracy improvement.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.48-55
• /
• 2012

Pressure vessels in vehicle industries, power plants, and chemical industries are often affected by flaw and defect generated inside the pressure vessels due to production processes or being used. It is very important to detect such internal defects of pressure vessel because they sometimes bring out serious problems. In this paper, an optical defect detection method using digital shearography is used. This method has advantages that the inspection can be performed at a real time measurement and is less sensitive to environmental noise. Shearography is a laser-based technique for full-field, non-contacting measurement of surface deformation (displacement or strain). The ultimate goal of this paper is to detect flaws in pressure vessels and to measure the lengths of the flaws by using unwrapping, phase images which are only obtained by Phase map. Through this method, we could decrease post-processing (next processing). Real length of a pixel can be calculated by comparing minimum and maximum unwrapping images with shearing angle. Through measuring several specimen defects which have different lengths and depths of defect, it can be possible to interpret quantitatively by calculating gray level.

• 비파괴검사학회지
• /
• 제30권2호
• /
• pp.91-97
• /
• 2010

본 연구는 전단위상 위상잠금 적외선열화상기술을 이용한 금속재료 시편의 내부결함을 평가하는 방법에 대한 연구 결과이다. 특히, STS304와 Cu-Zn 시편에 대한 비파괴시험 및 평가는 종래에는 적정한 실험 조건하에서 주로 시행됨에 따라 결항의 형태나 존재를 알 수 없는 상황에서는 최적실험조건을 찾는 일은 오랜 시간이 걸리는 단점이 있었다. 본 연구에서는 위상잠금방볍과 전단위상검출방법을 활용하여 60 MHz 신호로 설정된 가열 조건에서 결함의 위치 및 크기를 평가하였다. 전단위상분포는 시편 내부결함의 크기와 위치를 정량적으로 결정하기 위하여 최대, 최소, 영점을 이용하는 방법이다. 연구 결과로써 인공결함을 갖는 STS 304와 Cu7-Zn3 시험편에 대하여 제안된 기법의 적용을 검증하였으며, 결함평가에 영향을 주는 인자를 추출하고 그 영향을 분석하였다.