• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.203-210
• /
• 2015

This paper investigates the failure of a car with a 2.5-liter CRDi engine of the Hyundai Company. The failure is caused by intermittent poor acceleration while driving. To analyze the cause, we investigated the air intake volume, the fuel injection, and the air-fuel ratio, which were determined to be normal. The brake switch signal error was discovered while analyzing the function that limits the output of the engine. While investigating the cause, we discovered the corrosion of the pins on the connector of the brake switch. We determined that it was generated by soapy water flowing in the solar film. Therefore, the cause of the failure was the brake switch signal errors. Additionally, we determined that ECM was the normal fail-safe mode that implemented the override device for safety during normal acceleration. Based on these results, further solar film experiments must be conducted to fully elucidate the causes.

• 한국추진공학회지
• /
• 제23권1호
• /
• pp.46-51
• /
• 2019

Intermittent CSR 측정법을 이용하여 NBR 오링의 노화 거동과 수명 예측에 관하여 연구하였다. Intermittent CSR jig는 오링의 실제 사용 환경을 고려하여 설계 제작하였다. 오링의 노화 거동은 $40{\sim}120^{\circ}C$에서의 가속 노화 연구를 통하여 관찰하였다. 오링은 $80^{\circ}C$ 이하에서 비선형 노화 거동을 나타내었다. 오링의 수명은 고장 조건 20%에 대하여 Arrhenius plot으로부터 32.5년, WLF plot으로 부터 22.6년으로 나타났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1063-1066
• /
• 2002

The wavelet transform is a popular tool for studying intermittent and localized phenomena in signals. In this study the wavelet transform of cutting force signals was conducted for the detection of a tool failure in turning process. We used the Daubechies wavelet analyzing function to detect a sudden change in cutting signal level. A preliminary stepped workpiece which had intentionally a hard condition was cut by the inserted cermet tool and a tool dynamometer obtained cutting force signals. From the results of the wavelet transform, the obtained signals were divided into approximation terms and detailed terms. At tool failure, the approximation signals were suddenly increased and the detailed signals were extremely oscillated just before tool failure.

• 한국산학기술학회논문지
• /
• 제22권3호
• /
• pp.234-241
• /
• 2021

군에서는 수요예측에 대한 중요성을 인식하여 수리부속에 대해 예측 정확도 향상을 위한 많은 연구가 이루어지고 있다. 수리부속 수요예측은 예산 운영과 장비 가동률 측면에서 매우 중요한 요소가 되고 있다. 그러나 현재 군에서 적용중인 시계열 모형으로는 수요량의 변동과 발생주기가 일정하지 않은 간헐적 수요에 대해서는 예측에 한계가 있는 실정이다. 따라서, 본 연구는 공군 패트리어트 수리부속의 간헐적 수요에 대한 예측 정확도를 제고하는 방법을 제시하고자 하였다. 이를 위해서 2013년부터 2019년까지의 701개의 수리부속 소모개수를 토대로 수요 유형을 구분하여 수리부속의 간헐적 수요 자료를 수집하였다. 또한, 장비 고장에 영향을 줄 수 있는 외부 요인으로는 기온, 장비운영시간을 식별하여 입력변수로 선정하였다. 그 후, 소모개수와 외부 요인을 통해 군에서 적용하는 시계열 모형과 제안하는 데이터 마이닝 모형으로 예측을 실시하여 모형별 예측 정확도를 판단했다. 예측 결과로 기존의 시계열 모형과 비교하여 데이터 마이닝 모형의 예측 정확도가 높았으며, 그 중 다층 퍼셉트론 모형이 가장 우수한 성능을 보였다.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.78-85
• /
• 2002

The wavelet transform is a popular tool fer studying intermittent and localized phenomena in signals. In this study the wavelet transform of cutting force signals was conducted for the detection of a tool failure in turning process. We used the Daubechies wavelet analyzing function to detect a sudden change in cutting signal level. A preliminary stepped workpiece which had intentionally a hard condition was cut by the inserted cermet tool and a tool dynamometer obtained cutting force signals. From the results of the wavelet transform, the obtained signals were divided into approximation terms and detailed terms. At tool failure, the approximation signals were suddenly increased and the detailed signals were extremely oscillated just before tool failure.

• Geomechanics and Engineering
• /
• 제13권3호
• /
• pp.431-446
• /
• 2017

Rock bridges in rock masses would increase the bearing capacity of Non-persistent discontinuities. In this paper the effect of ratio of rock bridge surface to joint surface, rock bridge shape and normal load on failure behaviour of intermittent rock joint were investigated. A total of 42 various models with dimensions of $15cm{\times}15cm{\times}15cm$ of plaster specimens were fabricated simulating the open joints possessing rock bridge. The introduced rock bridges have various continuities in shear surface. The area of the rock bridge was $45cm^2$ and $90cm^2$ out of the total fixed area of $225cm^2$ respectively. The fabricated specimens were subjected to shear tests under normal loads of 0.5 MPa, 2 MPa and 4 MPa in order to investigate the shear mechanism of rock bridge. The results indicated that the failure pattern and the failure mechanism were affected by two parameters; i.e., the ratio of joint surface to rock bridge surface and normal load. So that increasing in joint area in front of the rock bridge changes the shear failure mode to tensile failure mode. Also the tensile failure change to shear failure by increasing the normal load.

• 대한산업공학회지
• /
• 제17권1호
• /
• pp.95-108
• /
• 1991

For the case where the lifetime at a constant stress level has exponential distribution, optimal accelerated life test plans are developed under the assumptions of intermittent inspection and Type I censoring. In a optimal plan, the low and high stress levels, the proportion of test units allocated and the inspection times at each stress are determined such that the asymptotic variance of the maximum likelihood estimator of logarithmic transformed mean at the use condition is minimized. In addition to the optimal plan in which numerical technique to solve the set of nonlinear equations must be employed to determine inspection times at each stress level, we also propose another plans which employ equally-spaced or equal probability inspection schemes at two overstress levels of corresponding optimal one. For both optimal and proposed plans, computational results indicate that the asymptotic variance of the estimated mean at the use stress is insensitive to number of inspections at overstress levels for the range of parameter values considered.

• 품질경영학회지
• /
• 제17권1호
• /
• pp.89-106
• /
• 1989

For Weibull distributed lifetimes, this paper presents asymptotically optimal accelerated life test plans for practical applications under intermittent inspection and type-I censoring. Computational results show that the asymptotic variance of a low quantile at the design stress as optimal criterion is insensitive to the number of inspections at overstress levels. Sensitivity analyses indicate that optimal plans are robust enough to moderate departures of estimated failure probabilities at the design and high stresses as input parameters to plan accelerated life tests from their true values. Monte Carlo simulation for small sample study on optimal accelerated life test plans developed by the asymptotic maximum likelihood theory is conducted. Simulation results suggest that optimal plans are satisfactory for sample size in practice.

• 품질경영학회지
• /
• 제24권2호
• /
• pp.25-43
• /
• 1996

This paper presents the optimal and practical constant-stress accelerated life test plans for the lognormal lifetime distribution tinder assumptions of intermittent inspection and Type-I censoring. In an optimal plan, the low stress level and the proportions of test units allocated at each stress are determined under given inspection scheme and number of inspections such that the asymptotic variance of the maximum likelihood estimator of a certain quantile at use condition is minimized. Although the practical plan adopts the same design criterion, it involves three rather than two overstress levels in order to compromise the practical deficiencies of the optimal plan. Computational experiments are conducted to choose an allocation plan and a inspection scheme of the practical plan and to compare with test plans over a range of parameter values.

• Neonatal Medicine
• /
• 제17권2호
• /
• pp.168-180
• /
• 2010

Acute renal failure (ARF) is common in the neonatal period, however, there are no uniform treatment strategies of ARF. The main treatment strategies are conservative management including medical treatment and the renal replacement therapy. Because ARF in the newborn is commonly acquired by hypoxic ischemic injury and toxic insults, removal of all the offending causes is important. Aminoglycoside, indomethacin, and amphotericin-B are the most common nephrotoxic drugs of ARF. To relieve the possible prerenal ARF, initial fluid challenge can be followed by diuretics. If there is no response, fluid restriction and correction of electrolyte imbalance should begin. Adequate nutritional support and drug dosing according to the pharmacokinetics of such drugs will be difficult problems. Renal replacement therapies may be provided by peritoneal dialysis, intermittent hemodialysis, or hemofiltration. New promising agents, bioartificial kidney, and stem cell will enable us to extend our therapeutic repertoire.