• Journal of the Korean Society for Heat Treatment
• /
• v.15 no.1
• /
• pp.9-15
• /
• 2002

Deformation behavior of nickel-rich Ti-51.5at.%Ni single crystals was investigated over a wide range of temperatures(77 to 440K) and strain levels(up to 9%) in compression. These alloys combined superior strength with wide range of pseudoelasticity temperature interval(~200K). The slip deformation in [001] orientation did not occur due to the prevailing slip system, and consequently, exhibited pseudoelastic deformation at temperatures ranging from 77 to 283K and 273 to 440K for the solutionized and over-aged cases, respectively. The critical transformation stress levels were in the range of 800 to 1800MPa for the solutionized case, and 200 to 1000MPa for the over-aged case depending on the temperature and specimen orientation. These stress levels are considerably higher compared to these class of alloys having lower Ni contents. The maximum transformation strains, measured from incremental straining experiments in compression, were lower compared to the phenomenological theory with Type II twinning. A compound twinning model depending on the successive austenite(B2) to intermediate phase(R) to martensite(B19') transformation predicts lower transformation strains compared to the Type II twinning case.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.4.1-4.6
• /
• 2016

Background: Most cases of facial asymmetry involve yaw deformity, and determination of the yaw correction level is very difficult. Methods: We use three-dimensional soft tissue simulation to determine the yaw correction level. This three-dimensional simulation is based on the addition of cephalometric prediction to gradual yaw correction. Optimal yaw correction is determined visually, and an intermediate splint is fabricated with computer-aided design and computer-aided manufacturing. Application of positioning devices and the performance of horseshoe osteotomy are advisable. Results: With this procedure, accurate repositioning of jaws was confirmed and patients obtained fairly good facial contour. Conclusions: This procedure is a promising method for a widespread, predictable treatment of facial asymmetry.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.24 no.5
• /
• pp.872-876
• /
• 2010

The present study found that EA pre-treatment effectively attenuated both spinal ERK activation and hyperalgesia against carrageenan-induced inflammation, whereas EA co-treatment with carrageenan injection unexpectedly elevated ERK activation in a synergistic manner and virtually had no analgesic effect. Therefore, we have concluded that the molecular mechanism of EA anagesia may be related to the inhibition of spinal ERK activation. Further experiments are required to find the intermediate candidates which transmits the pain-alleviating signals on the way of inhibiting ERK activation by EA.

• Journal of Powder Materials
• /
• v.19 no.6
• /
• pp.398-404
• /
• 2012

This paper describes the spherical ammonium diuranate gel particles which are the intermediated material of the $UO_2$ microsphere for an VHTR(very high temperature reactor) nuclear fuel. The characteristics of the intermediate-ADU gel particles prepared by AWD(ageing, washing, and drying) and FB(fluidized-bed) apparatus were examined and compared in a sol-gel fabrication process. The electrical conductivity of washing filtrate from the FB treating and the surface area of dried-ADU gel particles were higher than those of AWD treating. Also, an internal pore volume in dried-ADU gel particles showed a more decrease in AWD treatment than FB treatment because of decomposition of PVA affected by the washing time. However, the internal microstructures of ADU gel particles were similar regardless of the process variation.

• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.4
• /
• pp.1-14
• /
• 1991

In PECVD(Plasma-Enhanced Chemical Vapor Deposition) process, titanium nitride is thin and its adhesion is poor for the protective coatings. Therefore it has been studied that intermediate layer forms between substrate and TiN thin film. Using R.F. plasma nitriding, nitride layer was first formed, then TiN thin film coated by PECVD. The chemical composition of the coatings has been characterized using AES, EDS and their crystallographic structure by means of XRD. Mechanical properties such as microhardness and film adhesion have also been determined by vickers hardness test, scratch test and indentation test. As a result, there was no difference in chemical composition and structure between the TiN deposition only and the composite of TiN deposition on nitrided steel. It was found that nitrided substrate increased the hardness of TiN coatings and was beneficial in preventing the plastic deformation in the substrate. Therefore the effective load bearing capacity of the TiN coatings on nitrided steel was increased and their adhesion was improved as well. According to the results of this study, the processes that lead to the formation of composite layers characterized by good working properties, i.e., high microhardness, adhesion and resistance to deformation.

• Journal of Korean Neurosurgical Society
• /
• v.43 no.6
• /
• pp.307-310
• /
• 2008

Limited therapeutic options are available for vancomycin intermediate-resistant Staphylococcus epidermidis (VISE) infections and no optimum therapy has been established. We report a case of VISE skull osteomyelitis that was successfully treated with linezolid. The patient was a 53-year-old man who presented with headache, nausea and dysphasia. Brain computerized tomography (CT) demonstrated a subdural hematoma in the left hemisphere. Craniotomy and hematoma evacuation was performed and he showed good recovery despite a scalp wound infection caused by methicillin-resistant Staphylococcus aureus (MRSA). The organism isolated from the scalp wound was sensitive to vancomycin. The patient was treated with intravenous vancomycin for 44 days. However, he showed a high fever, persistent positive methicillin-resistant Staphylococcus epidermidis (MRSE) blood cultures, and a deteriorating clinical status. He underwent infected skull bone flap removal and linezolid treatment for 35 days. During one year of follow up, he has not had any further episodes of osteomyelitis or fever. Linezolid has shown to be effective agent to eradiate osteomyelitis caused by VISE.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.3 s.234
• /
• pp.369-386
• /
• 2005

Various aspects of structural optimization techniques under transient loads are extensively reviewed. The main themes of the paper are treatment of time dependent constraints, calculation of design sensitivity, and approximation. Each subject is reviewed with the corresponding papers that have been published since 1970s. The treatment of time dependent constraints in both the direct method and the transformation method is discussed. Two ways of calculating design sensitivity of a structure under transient loads are discussed - direct differentiation method and adjoint variable method. The approximation concept mainly focuses on re- sponse surface method in crashworthiness and local approximation with the intermediate variable Especially, as an approximated optimization technique, Equivalent Static Load method which takes advantage of the well-established static response optimization technique is introduced. And as an application area of dynamic response optimization technique, the structural optimization in flexible multibody dynamic systems is re- viewed in the viewpoint of the above three themes

• Progress in Superconductivity and Cryogenics
• /
• v.22 no.1
• /
• pp.1-6
• /
• 2020

This is a parameter study for the direct fabrication of a large grain YBCO bulk superconductors using Y₂O₃, BaCO₃ and CuO powders without any grinding step. The cracks, which have been formed due to volume contraction during calcination step, have been prevented by controlling the heating rate at 930~950 ℃. It has been observed that multi-grain growth has occurred due to the dissolution of Sm123 seed due to the retention of carbon in Ba-Cu-O melt. In order to accelerate the carbon release in prior calcination heat treatment, the reduction of pellet thickness and the drilling of artificial holes have been applied. Single-grain YBCO bulk superconductor has been successfully fabricated by stacking multiple thin slab. However, the crack formation has been rather prominent for the compact with artificial holes. The use of buffer pellet, which is supposed to act as diffusion barrier, has prevented the dissolution of Sm123 seed crystal and has led to the growth of single grain of high content of carbon containing specimen.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.1
• /
• pp.50-55
• /
• 2003

Herbicidal activity of $\delta$-aminolevulinic acid(ALA), an intermediate for the biosynthesis of tetrapyrroles such as chlorophyll, heme, bacteriochlorophyll, and vitamin $\textrm{B}_{12}$ analogues, was examined to determine the variation in phytotoxic potential against different plant species as affected by different application methods. Seed-soaking treatment, ALA at low concentrations did not affect shoot and root lengths of test plants while at highest concentration reduced them by 20 to 30%. Alfalfa showed the most tolerant response to ALA in both pre- and post-emergence application, and followed by rice. When applied with pre-emergence, cotyledons of Chinese cabbage were severely bleached with 0.5 mM of ALA at 24 hrs after application, and root growth of rice, barnyard grass, and alfalfa was significantly inhibited with increasing of concentration. With post-emergence application, ALA at 2 to 4 mM reduced shoot and root growths of Chinese cabbage and barnyard grass completely. Herbicidal effects of ALA were more enhanced in the treatment combined with 2,2-dipyridyl sthan single application in barnyard grass and Chinese cabbage. The results suggest that alfalfa was the most tolerant to ALA among the tested plants, and that post-emergence application of ALA exhibited greatest photodynamic activity against tested plants.

• Environmental Analysis Health and Toxicology
• /
• v.11 no.1_2
• /
• pp.41-47
• /
• 1996

1, 2, 4-Trichlorobenzene (1, 2, 4-TCB) is used as a dye carrier, as an intermediate in the synthesis of herbicides, as a flame retardant, and for other purpose. After a single oral administration of 1, 2, 4-TCB (200 mg/kg, 400 mg/kg) in rats, toxic effects were studied by means of serum biochemical and heatological analysis, and liver calcium concentration. Administration of 1, 2, 4-TCB resulted in dose-dependent liver and kidney damage as estimated by increased serum alanine aminotransferase (ALT) activities, liver calcium concentration and blood urea nitrogen (BUN). Pretreatment with DL-buthionine sulfoximine (BSO, 2 mmol/kg, i.p. ) considerably decreased liver glutathione concentration, which was accompanied by markedly elevated serum ALT activites. It is well-known that toxicity of halogenated benzene such as bromobenzene, 1, 4-dichlorobenzene is increased by pretreatment of henobarbital (PB), and protected by pretreatment of cytochrome P450 inhibitor including metyrapone (MP). However, there was no obvious alterations in toxicity of 1, 2, 4-TCB by pretreatment of phenobarbital or metyrapone. In comparison with control group, treatment groups exhibited significant changes in some parameters of hematological analysis but all hematological values remined within normal ranges.