• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.351-358
• /
• 2016

This paper describes an efficient hardware implementation of lightweight block cipher algorithm CLEFIA. The CLEFIA crypto-processor supports for three master key lengths of 128/192/256-bit, and it is based on the modified generalized Feistel network (GFN). To minimize hardware complexity, a unified processing unit with 8 bits data-path is designed for implementing GFN that computes intermediate keys to be used in round key scheduling, as well as carries out round transformation. The GFN block in our design is reconfigured not only for performing 4-branch GFN used for round transformation and intermediate round key generation of 128-bit, but also for performing 8-branch GFN used for intermediate round key generation of 256-bit. The CLEFIA crypto-processor designed in Verilog HDL was verified by using Virtex5 XC5VSX50T FPGA device. The estimated throughput is 81.5 ~ 60 Mbps with 112 MHz clock frequency.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.86-91
• /
• 1993

A synthetic route to (+)-isocarbacyclin starting from (-)-tricyclo[3.3.0.0$^{2.8}$]octan-3-one 6 is described. The key intermediate 4 has been synthesized from 6 by a sequential introduction of methoxycarbonyl group at C-12 and the oxygen functionality at C-9${\alpha}$(PG numbering) for the construction of ${\alpha}-and\;{\omega}$-side chain, and then converted to isocarbacyclin methyl ester 2.

• Bulletin of the Korean Chemical Society
• /
• v.6 no.2
• /
• pp.95-98
• /
• 1985

Stereospecific [2 + 2] cycloadducts are obtained as major products when trans-cinnamonitrile derivatives are irradiated with excess tetramethylethylene. The fluorescence quenching studies, weak exciplex fluorescence, and sensitization by benzophenone suggest that this stereospecific photochemical cycloaddition reaction involves singlet exciplex intermediate formed between cinnamonitrile derivatives and tetramethylethylene.

• Advances in materials Research
• /
• v.8 no.1
• /
• pp.47-73
• /
• 2019

Joining of Mg/Ti hybrid structures by welding for automotive and aerospace applications has attracted great attention in recent years due mainly to its potential benefit of energy saving and emission reduction. However, joining them has been hampered with many difficulties due to their physical and metallurgical incompatibilities. Different joining processes have been employed to join Mg/Ti, and in most cases in order to get a metallurgical bonding between them was the use of an intermediate element at the interface or mutual diffusion of alloying elements from the base materials. The formation of a reaction product (in the form of solid solution or intermetallic compound) along the interface between the Mg and Ti is responsible for formation of a metallurgical bond. However, the interfacial bonding achieved and the joints performance depend significantly on the newly formed reaction product(s). Thus, a thorough understanding of the interaction between the selected intermediate elements with the base metals along with the influence of the associated welding parameters are essential. This review is timely as it presents on the current paradigm and progress in welding and joining of Mg/Ti alloys. The factors governing the welding of several important techniques are deliberated along with their joining mechanisms. Some opportunities to improve the welding of Mg/Ti for different welding techniques are also identified.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.1
• /
• pp.69-77
• /
• 1992

The natural frequencies of a beam on elastic foundation are investigated in the present paper. The inhomogeneous elastic foundation can be modelled as a combination of distributed translational spring, rotational spring, intermediate supports and dampers. The natural frequencies and mode shapes of the system are obtained by using the Galerkin's method, and also compared with the results in the literature. Furthermore, the natural frequencies of the beam with elastically mounted masses, which can be used as vibration absorbers, are obtained by an efficient numerical scheme suggested in the present paper.

• Transactions of Materials Processing
• /
• v.18 no.7
• /
• pp.550-555
• /
• 2009

In the multi-pass shape drawing process, the pass schedule that includes the determination of reduction ratio and intermediate die shape is very important. This study used the equal reduction, equal load, and electric field analysis method for pass schedule of the multi-pass shape drawing. The reduction ratio was calculated by the equal reduction and equal load method. And the intermediate die shape was determined by the result of the electric field analysis and the calculated reduction ratio. The proposed pass schedule method was applied to a shape drawing for producing cross roller guide. Finally, FE-analysis and shape drawing experiment were performed to verify the effectiveness of the proposed method.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.113-117
• /
• 2016

Temperature dependent reverse-bias current-voltage (I-V) characteristics in Cu Schottky contacts to oxygen plasma treated n-InP were investigated. For untreated sample, current transport mechanisms at low and high temperatures were explained by thermionic emission (TE) and TE combined with barrier lowering, respectively. For plasma treated sample, experimental I-V data were explained by TE or TE combined with barrier lowering models at low and high temperatures. However, the current transport was explained by a thermionic field emission (TFE) model at intermediate temperatures. From X-ray photoemission spectroscopy (XPS) measurements, phosphorus vacancies (VP) were suggested to be generated after oxygen plasma treatment. V_P possibly involves defects contributing to the current transport at intermediate temperatures. Therefore, minimizing the generation of these defects after oxygen plasma treatment is required to reduce the reverse-bias leakage current.

• Journal of Photoscience
• /
• v.6 no.2
• /
• pp.57-60
• /
• 1999

The reaction of [1.1.1]propellane with singlet methylene afforded 1,3-dimethylenecyclobutane and [l.1.1.1]paddlane (3). Various minor products were also produced. The reaction of [1.1.1]propellane with triplet methylene afforded 1,3-dimethylenecyclobutane (2) and various minor products. But even trace of [1.1.1.1]paddlane was not detected. The mechanism for the addition of singlet methylene involved [1.1.1.1]paddlane intermediate The addition of triplet methylene led to diradical intermediate. In order to reveal the reaction pathway for generation of various ruiner products, various studies were carried out under the same condition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.3
• /
• pp.207-215
• /
• 2011

An endosulfan degrading bacterial strain, K-1321, was isolated by endosulfan-enrichment culture from a seaside sediment collected at Dadaepo Beach, Busan, Korea. The strain was identified as a Serratia sp. based on the results of morphological, biochemical and 16S rDNA homology analyses. Serratia sp. K-1321 was able to completely degrade 50 ppm endosulfan in culture media and soil within 6 weeks at $25^{\circ}C$. GC/MS analysis revealed that endosulfan diol was an intermediate of the bacterial endosulfan degradation. Considering the above results, we concluded that Serratia sp. K-1321 utilized endosulfan as a carbon source and metabolized endosulfan via a less toxic pathway, such as the formation of endosulfan diol as an intermediate.

• Ocean and Polar Research
• /
• v.27 no.2
• /
• pp.183-188
• /
• 2005

Using data from Argo floats collected in the Southern Ocean, we describe water mass prop erties and flow fields at intermediate levels (1000m and 2000m levels). Water mass properties from Argo floats, which are consistent with those from previous hydrographic surveys, reflect the movement of the floats well even without quality control on the Argo data. Since the flow fields from the Argo floats do not cover the entire Southern Ocean, we could not obtain a general circulation pattern, especially at the 2000m level. We, however, can confirm the general eastward tendency due to ACC largely following the topography.