• 한국주거학회논문집
• /
• 제13권5호
• /
• pp.31-42
• /
• 2002

This comparative study between Korean and German housings aims at understanding different structural systems in the indoor and outdoor spaces, depending upon the user′s perception of the socio-cultural attributes. The analysis starts with four alternative contrary assumptions, that appear in morphological forms of dwelling; 1) linear distribution vs. areal distribution of residential districts, 2) mirror system vs. comb system in the layout of plot plans 3) organization of front vs. back outdoor spaces and 4) opening vs. closing in the indoor spaces. A clear difference is found between Korean and German samples in view of public and private relationships between indoor and outdoor spaces as well as the intermediate space. In the korean housing there always exists a symbolic and psychological territory of a certain sphere. On the other hand, outdoor space passes through various phases only to form a certain hierarchy even in a private space and, thereby, sets a boundary between private and public areas. In the case of Germany, the building itself draws a clear line between private and public outdoor spaces, and therefore the outdoor space has a "front" and "back". Thus, Germany′s private space may face a genuine public space and street, which is rare in the Korean housing. Although the layout of indoor space in the korean housing tends to be open, such an openness may be outstanding in living and dining spaces, kitchen and various accesses to rooms. In the case of Germany, such indoor spaces are usually closed to each other. Thus corridors act to separate these spaces. Such differences are analysed to be due to the different perceptions of interpersonal and socio-cultural attributes as intra-family and inter-neighbor relationships or communications.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.587-592
• /
• 2002

A new digital correlator fur an airborne synthetic aperture radiometer was designed in order to replace the conventional analog correlator unit which will become very complicated while the number of channels is increasing. The digital correlator uses digital IQ demodulator instead of the intermediate frequency (IF) phase shifter to make the correlation processing performed digitally at base band instead of analogly at IF. This technique has been applied to the digital receiver in softradio. The down-converted IF signals from each pair of receiver channels become low rate base-band digital signals after under-sampled, Digitally Down-Converted (DDC), decimated and filtered by FIR filters. The digital signals are further processed by two digital multipliers (complex correlation), the products are integrated by the integrators and finally the outputs from the integrators compose of the real part and the imaginary part of a sample of the visibility function. This design is tested by comparing the results from digital correlators and that from analog correlators. They are agreed with each other very well. Due to the fact that the digital correlators are realized with the help of Analog-Digital Converter (ADC) chips and the FPGA technology, the realized volume, mass, power consumption and complexity turned out to be greatly reduced compared with that of the analog correlators. Simulations show that the resolution of ADC has an influence on the synthesized antenna patterns, but this can be neglected if more than 2bit is used.

• 한국음향학회지
• /
• 제18권1호
• /
• pp.10-15
• /
• 1999

본 연구는 35° Y-X Quartz 기판에 낮은 형상 요소를 갖는 Code Division Multiple Access(CDMA)방식 기지국용 Intermediate Frequency (IF)단 통과대역 필터를 설계하고 제작하는 방법에 대해 연구하였다. 이 기판 위에 임펄스 모델링을 이용하여 낮은 형상 요소를 갖는 표면 탄성파 필터를 제작하기 위해 입력단에는 Apodization weighted형의 빗살무늬 변환기, 출력단에는 Withdrawal weighted형의 빗살무늬 변환기로 구성하였다. 그리고 입출력 IDT의 개수는 리플의 영향을 최소화하기 위해 Kaiser-Bessel 창함수를 이용하였으며, 각각 2200쌍과 1000쌍으로 하였다. IDT 전극의 폭은 3.6㎛, 간격은 3.5㎛였으며 두께는 파장과의 비를 고려해 6000Å으로 할 때 최적의 결과를 얻을 수 있었으며, 구경은 임피던스 정합을 위해 2mm로 하였다. 제작된 SAW필터는 중심 주파수 115.2MHz, 통과대역 폭은 1.27MHz이상, 형상 요소는 1.3이하, 삽입손실 -l5dB 및 저지대역 -45dB이하인 특성을 얻을 수 있었다.

• 터널과지하공간
• /
• 제26권5호
• /
• pp.339-347
• /
• 2016

스웨덴 포쉬마크 (Forsmark)지역에서는 1988년부터 세계 최초의 동굴식 중저준위 방사성 폐기물 처분장(SFR1)이 운영되고 있다. 4개의 터널 및 1개의 사일로에 용량 $63,000m^3$의 처분공간이 확보되어 연간 $1,000m^3$의 폐기물을 처분할 수 있었지만, 스웨덴 내 12기 중 10기의 원자로의 수명이 연장되고, 나머지 2기의 원자로가 폐쇄되어 추가 폐기물 처분에 대한 요구가 발생하게 되었다. 따라서 6기의 수평터널을 추가로 건설하여 폐기물과 9개의 반응로 용기 처분을 위한 $108,000m^3$의 처분 공간을 확보할 계획으로 스웨덴 방사성폐기물 관리주식회사(SKB)는 SFR3으로의 확장을 위한 허가 신청서를 2014년 정부에 제출하였다. 본 연구에서는 SFR3의 추가 확장 계획에 대해 소개하고, SFR3의 계획 시에 고려된 지질학적, 암반공학 및 암반수리학적인 요소들을 소개하였다.

• 제어로봇시스템학회논문지
• /
• 제8권9호
• /
• pp.719-727
• /
• 2002

We proposed a decoupled adaptive fuzzy sliding-mode control scheme for a class of fourth-order nonlinear systems. The system is decoupled into two second-order systems such that each subsystem has a separate control target expressed in terms of sliding surface. For these sliding surfaces, we define main and sub target conditions. and, we made intermediate variables which are interconnected both surface conditions from the sub target sliding surface. Then, Two sets of fuzzy rule bases are utilized to represent the equivalent control input with unknown system functions of the main target sliding surface including intermediate variables. The membership functions of the THEN-part, which is used to construct a suitable equivalent control of sliding-mode control, are changed according to the adaptive law. With such a design scheme, we not only maintain the distribution of membership functions over state space but also reduce the computing time considerably. We apply the decoupled adaptive sliding-mode control to a nonlinear Cart-Pole system and confirms the validity of the proposed approach.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.3025-3032
• /
• 2012

Carbon microcapsules containing silicon nanoparticles (Si NPs)-carbon nanotubes (CNTs) nanocomposite (Si-CNT@C) have been fabricated by a two step polymerization method. Silicon nanoparticles-carbon nanotubes (Si-CNT) nanohybrids were prepared with a wet-type beadsmill method. A polymer, which is easily removable by a thermal treatment (intermediate polymer) was polymerized on the outer surfaces of Si-CNT nanocomposites. Subsequently, another polymer, which can be carbonized by thermal heating (carbon precursor polymer) was incorporated onto the surfaces of pre-existing polymer layer. In this way, polymer precursor spheres containing Si-CNT nanohybrids were produced using a two step polymerization. The intermediate polymer must disappear during carbonization resulting in the formation of an internal free space. The carbon precursor polymer should transform to carbon shell to encapsulate remaining Si-CNT nanocomposites. Therefore, hollow carbon microcapsules containing Si-CNT nanocomposites could be obtained (Si-CNT@C). The successful fabrication was confirmed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). These final materials were employed for anode performance improvement in lithium ion battery. The cyclic performances of these Si-CNT@C microcapsules were measured with a lithium battery half cell tests.

• Geomechanics and Engineering
• /
• 제7권3호
• /
• pp.317-333
• /
• 2014

The study of the mechanical behavior of rockfill materials under three-dimensional loading conditions is a current research focus area. This paper presents a microscale numerical study of rockfill deformation and strength characteristics using the Combined Finite-Discrete Element Method (FDEM). Two features unique to this study are the consideration of irregular particle shapes and particle crushability. A polydisperse assembly of irregular polyhedra was prepared to reproduce the mechanical behavior of rockfill materials subjected to axial compression at a constant mean stress for a range of intermediate principal stress ratios in the interval [0, 1]. The simulation results, including the stress-strain characteristics, relationship between principal strains, and principal deviator strains are discussed. The stress-dilatancy behavior is described using a linear dilatancy equation with its material constants varying with the intermediate principal stress ratio. The failure surface in the principal stress space and its traces in the deviatoric and meridian plane are also presented. The modified Lade-Duncan criterion most closely describes the stress points at failure.

• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.123-130
• /
• 2005

A digital in-line holographic particle image velocimetry (HPIV) which can be applied to measure three-dimensional velocity fields of turbulent flows was developed. There are three different implementation methods of HPIV: traditional film-based HPIV, intermediate HPIV and digital HPIV. The traditional film-based HPIV and intermediate HPIV method is rather troublesome to do experiments and takes long calculation time, compared with the digital HPIV, Configuration of the digital in-line HPIV is simple and the data processing routine is similar to conventional 2D PIV methods. The digital HPIV velocity field measurement consists of four steps: recording, numerical reconstruction, particle extraction and velocity extraction. In the velocity extraction process, we improved PTV algorithm to extract the displacement of particle each placed in 3D space. The developed digital in-line HPIV system was applied to a vertical jet flow. The 3D velocity vectors measured by the digital HPIV method in the near field are in a good agreement with 2D PIV results.

• 농촌지도와개발
• /
• 제25권3호
• /
• pp.161-173
• /
• 2018

The study aims to explore the policy directions for young farmers within Korean agricultural context, particularly in Chung-nam Province. In order to accomplish this, young farmers were classified into three categories: successors, new farmers, potential farmers. The importance of young farmers is becoming more of a focus due to decline of population numbers in rural communities as well as the aging of agriculture population. In order to address these two problems, it is necessary to create and implement policy to support each category of young farmer. Rather than the current focus on nurturing young farmers as a labor force, the role of young farmers in maintaining local communities should be expanded in current agricultural system. The local community should provide appropriate conditions for young farmers in Chung-nam Province for the various purposes they have and the roles they fill. In conclusion, it is necessary to provide a 'space' where young farmers can meet base on the community. For this, the role of the community based intermediate support organization for the integrated support system is of great significance.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.247-252
• /
• 2004

To secure stability and availability of Rammed Aggregate Pier method as the foundation of a structure, the bearing capacity and failure behavior characteristics was studied through soil laboratory tests in a model ground. In this study, soil laboratory tests use carried out to find the applicability of RAP method as the foundation of a structure. And bearing capacity and the failure mechanism of RAP method was studied according to relative density($60\%,\;70\%,\;90\%$), diameter(45mm, 60mm, 70mm) of each pier ana depth(5cm, l0cm, 15cm, 20cm, 25cm, 30cm). Earth pressure cell is set up approach RAP and 1.0D space at RAP center. Bearing acpacity and the failure mechanism of RAP is investigated by load test As a result, bulging failure was happened in $5\~10cm\;(1.0D\~2.00)$ depth which the maximum lateral earth pressure is acting. Especially, diameter changing of RAP are in inverse proportion to the relative density and the lateral stress is very much influenced by the lateral earth pressure in every layer and tends to decrease according to depth.