• 제목/요약/키워드: Interlayer shrinkage

검색결과 6건 처리시간 0.028초

강도 및 건조수축 저감을 통한 CLC의 안정성 평가 (Evaluation of Stability of CLC through Strength and Reduction of Drying Shrinkage)

  • 이창우;황우준;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2022년도 가을 학술논문 발표대회
    • /
    • pp.205-206
    • /
    • 2022
  • This study intends to conduct tests on subsidence and drying shrinkage by mixing CaO-CSA expansion materials to ensure the stability of CLC, and to understand its properties. Based on CLC of 0.6, the replacement ratio of CaO-CSA expansion material was conducted at five levels compared to blast furnace slag, and the results are as follows. The replacement of CaO-CSA expansion material at an appropriate level produces ethringhite and potassium hydroxide, and it is believed that the internal voids of CLC and the Tobelmorite interlayer structure are charged to increase the structural stability, leading to an increase in compressive strength and a decrease in the drying shrinkage. However, it is judged that tissue relaxation due to excessive substances in the high replacement ratio affects the stability of CLC. In the future, we will conduct additional experiments on density, absorption rate, flow test, and settlement, and evaluate and analyze the stability of CLC by selecting the optimal replacement ratio of CaO-CSA expansion materials.

  • PDF

Creep Mechanisms of Calcium-Silicate-Hydrate: An Overview of Recent Advances and Challenges

  • Ye, Hailong
    • International Journal of Concrete Structures and Materials
    • /
    • 제9권4호
    • /
    • pp.453-462
    • /
    • 2015
  • A critical review on existing creep theories in calcium-silicate-hydrate (C-S-H) is presented with an emphasis on several fundamental questions (e.g. the roles of water, relative humidity, temperature, atomic ordering of C-S-H). A consensus on the rearrangement of nanostructures of C-S-H as a main consequence of creep, has almost been achieved. However, main disagreement still exists on two basic aspects regarding creep mechanisms: (1) at which site the creep occurs, like at interlayer, intergranular, or regions where C-S-H has a relatively higher solubility; (2) how the structural rearrangement evolutes, like in a manner of interlayer sliding, intra-transfer of water at various scales, recrystallization of gelled-like particles, or dissolution-diffusion-reprecipitation at inter-particle boundary. The further understanding of creep behavior of C-S-H relies heavily on the appropriate characterization of its nanostructure.

탈수 작용에 따른 몬모릴로나이트의 코발트 흡착 특성 변화 (Changes in Cobalt Adsorption Properties of Montmorillonite by Dehydration)

  • 장영준;김영규
    • 광물과 암석
    • /
    • 제36권2호
    • /
    • pp.107-115
    • /
    • 2023
  • 코발트는 합금산업에서 발생되는 산업 폐기물과 산성광산배수로 자연에 유입될 수 있으며 또한 고준위 방사성 폐기물을 구성하는 방사성 핵종(60Co)기도 하다. 스멕타이트는 이들을 흡착 격리하는데 유용하게 사용될 수 있는 광물이다. 본 연구에서는 기존에 특성이 잘 알려진 스멕타이트 중 The Clay Mineral Society (CMS)의 source clay인 Cheto-type montmorillonite (Cheto-MM)를 사용하여 가열에 의한 탈수 전후 광물의 층간수 존재 여부에 따른 흡착 자리가 코발트 흡착에 미치는 영향을 평가하고, 흡착 속도 및 등온흡착식 모델을 적용하여 Cheto-MM의 코발트에 대한 흡착 기작을 연구하였다. 본 연구 결과 탈수 및 이에 따른 층간 수축에 의해 흡착 특성이 달라지는 것을 확인할 수 있었으며, 코발트는 Cheto-MM의 층 모서리 자리에서의 흡착이 약 38%, 층간 내부에서의 흡착이 약 62%를 차지하는 것으로 확인되었고 Cheto-MM의 코발트 흡착은 층간 내부에 의한 영향이 큰 것으로 판단된다. 이러한 흡착에 있어 흡착 속도 모델을 적용한 결과, Cheto-MM의 코발트 흡착 속도는 pseudo-second-order 모델로 설명되며 농도에 따른 흡착은 Langmuir 등온흡착 모델로 가장 잘 설명되었다. 본 연구는 몬모릴로나이트의 흡착 자리에 따른 코발트의 흡착 양상에 대한 기본지식을 제공하고, 추후 고준위 방사성 폐기물 처분장에서의 스멕타이트의 흡착 거동을 예측하는데 유용하게 사용될 수 있을 것으로 생각된다.

FDM 방식 3D 프린팅에서 제작 조건에 따른 기계적물성치와 형상정밀도의 실험적 비교 (Comparison of Mechanical Properties and Form Accuracy in FDM 3D Printing Based on Building Conditions)

  • 김기대
    • 한국기계가공학회지
    • /
    • 제20권8호
    • /
    • pp.52-59
    • /
    • 2021
  • In this study, we experimentally evaluated the mechanical properties and geometric form accuracy in FDM 3D printing processes based on the printing direction, building direction, and layer thickness. The specimen test results showed that the tensile strength increased by over 33% in the printing direction compared to the direction perpendicular to printing and the tensile strength becomes larger as the layer thickness decreased. Furthermore, the tensile and impact strengths in the building direction were significantly reduced due to the difference in the interlayer joining and bonding strengths of the fused material. Additionally, shrinkage of the material due to phase change induced curl distortion especially in thin and long 3D-printed products, which increased as the layer thickness increased.

층상구조 재료의 소결: 출발물질이 소결결함 및 잔류응력에 미치는 영향 (Sintering of Layer Structure Materials: Effect of Starting Material on Sintering Defects and Residual Stress)

  • 정연길
    • 한국세라믹학회지
    • /
    • 제36권1호
    • /
    • pp.61-68
    • /
    • 1999
  • 층상구조를 이루는 재료의 소결시 형성되는 다양한 결함 및 잔류응력을 고찰하기 위해 TZP-SUS계 및 ZT/SUS계다층재료와 porcelain/alumina 및 porcelain/Y-TZP 이층재료를 소결법으로 제조하였다. 상압소결로 제조한 다층재료에서는 층간의 소결수축율 차이에 의해 warping, splitting, 균열 등의 소결결함이 관찰되었으며, 중간층수 및 두께의 조절과 출발물질의 제어를 통해 이러한 소결결함이 완화됨을 알 수 있었다. Tape casting법으로 제조한 다층재료에서는 소결시 가한 압력에 의해 소결결함, 특히 warping이 제어됨을 확인할 수 있었다. 이층재료에서 형성되는 잔류응력은 vickers 압입법으로 관찰하였다. Porcelain/alumina에서는 porcelain 측의 계면에 작은 인장응력이, porcelain/Y-TZP에서는 압축응력이 형성됨을 확인할 수 있었으며, 이러한 잔류응력은 이층재료의 강도에도 영향을 미침을 알수 있었다. 결국 다층재료의 소결결함 및 잔류응력은 재료설계와 출발물질 상수에 영향을 받는다는 것을 알 수 있었다.

  • PDF

산화탄소로부터 열분해한 탄소의 구조 및 전기이중층 거동 (Structures and Double Layer Performances of Carbons Pyrolized from Carbon Oxides)

  • 김익준;양선혜;전민제;문성인;김현수;안계혁
    • 공업화학
    • /
    • 제18권5호
    • /
    • pp.522-526
    • /
    • 2007
  • 산화처리 탄소로부터 상분해시킨 코크스의 구조 및 전기화학적 특성을 조사하였고, KOH 활성화 코크스와 비교하였다. $NaCLO_3$/니들 코크스의 비율이 7.5 이상의 조건에서 산화처리를 행한 graphene 층간 구조를 가진 니들 코크스($d_{002}=3.5{\AA} $)는 산화흑연 구조로 상변화가 일어나고, 이 때 산소함량의 증가와 함께 층간 간격은 $6.9{\AA} $으로 증가하였다. 산화처리 탄소를 $200^{\circ}C$에서 열처리 건조를 하면 상분해가 일어나서 다시 graphene 층간 구조로 복원하고, 층간 간격은 $3.6{\AA} $으로 감소하였다. 그러나, KOH 활성화 과정에서 니들 코크스의 층간 변화는 관찰되지 않았다. 한편, 1차 충전에서 전해질 이온들에 의한 상분해 코크스에의 침입은 1.0 V에서 일어나고, 이는 KOH 활성 코크스보다 작은 수치이다. 상분해 코크스를 이용한 커패시터 셀은 1 kHz에서 $0.57{\Omega}$의 내부저항을 나타내고, 2 전극 시스템에서 0~2.5 V 범위 내에서 측정한 상분해 코크그의 중량 또는 전극 부피 당 용량은 각각 30.3 F/g과 26.9 F/mL을 나타내었고, 이들 특성은 KOH 활성 코크스보다 우수하였다. 상분해 코크스의 우수한 전기화학적 특성은 산화처리-상분해 과정에서의 층간 팽창-수축에 따른 층간 결함과 관련 있는 것으로 판단된다.