• Korean Journal of Remote Sensing
• /
• v.33 no.5_3
• /
• pp.787-798
• /
• 2017

In the present study, the interior orientation parameters were computed by using various kinds of methods. Five DSMs (Digital Surface Models) in total were produced by applying interior orientation parameters to the image processing, and the accuracy was evaluated. In order to use interior orientation parameters as independent variables of DSM accuracy, flight parameters and exterior orientation parameters that can affect the accuracy of DSM were set to be the only fixed variables. From the results of the present study, the RMSE of campaign 3-2 was found to be 0.0305 m, which was the most favorable result. Thus, it is advisable to produce DSM by adjusted interior parameters after figuring out the interior orientation parameters using a camera calibration program at laboratory environment.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.4
• /
• pp.351-357
• /
• 2008

An aerial multi-looking camera system equips itself with five separate cameras which enables acquiring one vertical image and four oblique images at the same time. This provides diverse information about the site compared to aerial photographs vertically. The geometric relationship of oblique cameras and a vertical camera can be modelled by 6 exterior orientation parameters. Once the relationship between the vertical camera and each oblique camera is determined, the exterior orientation parameters of the oblique images can be calculated by the exterior orientation parameters of the vertical image. In order to examine the exterior orientation of both a vertical camera and each oblique cameras in the multi-looking camera relatively, calibration targets were installed in a lab and 14 images were taken from three image stations by tilting and rotating a non-metric digital camera. The interior orientation parameters of the camera and the exterior orientation parameters of the images were estimated. The exterior orientation parameters of the oblique image with respect to the vertical image were calculated relatively by the exterior orientation parameters of the images and error propagation of the orientation angles and the position of the projection center was examined.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.125-132
• /
• 1987

The bundle adjustment used in photogrammetric data reduction is based on the collinearity condition. Photogrammetry has been used in many non-topographic applications. Due to the necessities of having fiducial marks and knowing initial approximations for interior and exterior orientation elements in bundle adjustment, it cannot be applied when non-metric cameras are used. Marzan and Karara develop the DLT(Direct Linear Transformation) program which directly transforms comparator coordinates into object space coordinates without approximate values. In this paper, several modifications of original DLT program have been made for accuracy improvement in close-range photogrammetry using non-metric cameras. In modified program, gross error detection method and computation of exterior orientation elements are incorporated, and more iterations are introdued.

• Korean Institute of Interior Design Journal
• /
• v.21 no.1
• /
• pp.68-77
• /
• 2012

Appreciating the aspect of modem architecture requires not only the comprehension of the nature of design and architects' ways of thinking and expression but also observers' views on buildings and their perceptive/cognitive stages. This calls for an in-depth study on the "system of phenomenological perceptions" that works as a new architectural experience system. The system of phenomenological perceptions makes it possible to specify the individual process of understanding architecture, that is, hands-on experiences, participations, feelings, perceptions, and cognition. The value of user experience and cognition has been emphasized by philosophical and aesthetical concepts as well. Therefore, in order to better appreciate the modern architecture, this study suggests theoretical consideration to "orientation and event" that are crucial elements in understanding a phenomenological view and materializing actual space formation. This offers the cognitive system with which we analyze modem architecture and comprehensive expressional methods. In other words, this study contemplates the system of phenomenological perceptions from an existential spatial perspective by structurizing the system of the orientation and the event in order to segmentalize users' current locations, potential directions, the relations with spaces, continual vie'wpoints as well as buildings' functions and interior and exterior division. The system of phenomenological perceptions helps understand and systemize modern architecture through a system based on relations between sensation, perception, cognition, sensitivity, and rationality. This creates a new cognitive system employing the concept of the orientation and the event, which is different from a normal cognitive system basing on the sense of vision. When observers appreciate space, they tend to relate the space to a certain event and to remember their experiences in it. During the process, they draw borders of the space in which the event takes place and give shape to their experiences including actions, movements, cognition and sensation. The process leads to the formation of "placeness," and here, the concept of the orientation comes in as the location and the center of the placeness. This study proves that a determined orientation coupled with individual experience and events settles the place ness; detailed elements in the cognitive system have close relations with one another; the orientation, actions, events, and places are the factors that materialize observers' architectural experience.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.2
• /
• pp.43-50
• /
• 2018

The camera is a key element in image-based three-dimensional positioning, and camera calibration, which properly determines the internal characteristics of such a camera, is a necessary process that must be preceded in order to determine the three-dimensional coordinates of the object. In this study, a new methodology was proposed to determine interior orientation parameters of a camera semi-automatically without being influenced by size and shape of checkerboard for camera calibration. The proposed method consists of exterior orientation parameters estimation using quaternion, recognition of calibration target, and interior orientation parameter determination through bundle block adjustment. After determining the interior orientation parameters using the chessboard calibration target, the three-dimensional position of the small 3D model was determined. In addition, the horizontal and vertical position errors were about ${\pm}0.006m$ and ${\pm}0.007m$, respectively, through the accuracy evaluation using the checkpoints.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.3
• /
• pp.189-198
• /
• 2019

In photogrammetry, single photo resection is a method of determining exterior orientation parameters corresponding to a position and an attitude of a camera at the time of taking a photograph using known interior orientation parameters, ground coordinates, and image coordinates. In this study, we proposed a single photo resection algorithm that determines the exterior orientation parameters of the camera using cosine law and linear equation-based three-dimensional coordinate transformation. The proposed algorithm first calculated the scale between the ground coordinates and the corresponding normalized coordinates using the cosine law. Then, the exterior orientation parameters were determined by applying linear equation-based three-dimensional coordinate transformation using normalized coordinates and ground coordinates considering the calculated scale. The proposed algorithm was not sensitive to the initial values by using the method of dividing the longest distance among the combinations of the ground coordinates and dividing each ground coordinates, although the partial derivative was required for the nonlinear equation. In addition, since the exterior orientation parameters can be determined by using three points, there was a stable advantage in the geometrical arrangement of the control points.

• Korean Journal of Remote Sensing
• /
• v.24 no.3
• /
• pp.223-233
• /
• 2008

In the mid 90's, the U.S. government released images acquired by the first generation of photo reconnaissance satellite missions between 1960 and 1972. The Declassified Intelligent Satellite Photographs (DISP) from the Corona mission are of high quality with an astounding ground resolution of about 2 m. The KH-4A panoramic camera system employed a scan angle of $70^{\circ}$ that produces film strips with a dimension of $55\;mm\;{\times}\;757\;mm$. Since GPS/INS did not exist at the time of data acquisition, the exterior orientation must be established in the traditional way by using control information and the interior orientation of the camera. Detailed information about the camera is not available, however. For reconstructing points in object space from DISP imagery to an accuracy that is comparable to high resolution (a few meters), a precise camera model is essential. This paper is concerned with the derivation of a rigorous mathematical model for the KH-4A/B panoramic camera. The proposed model is compared with generic sensor models, such as affine transformation and rational functions. The paper concludes with experimental results concerning the precision of reconstructed points in object space. The rigorous mathematical panoramic camera model for the KH-4A camera system is based on extended collinearity equations assuming that the satellite trajectory during one scan is smooth and the attitude remains unchanged. As a result, the collinearity equations express the perspective center as a function of the scan time. With the known satellite velocity this will translate into a shift along-track. Therefore, the exterior orientation contains seven parameters to be estimated. The reconstruction of object points can now be performed with the exterior orientation parameters, either by intersecting bundle rays with a known surface or by using the stereoscopic KH-4A arrangement with fore and aft cameras mounted an angle of $30^{\circ}$.

• Korean Institute of Interior Design Journal
• /
• v.25 no.4
• /
• pp.3-12
• /
• 2016

The purpose of this study was to analyze City squares in Europe according to Biophilic Design elements to apply domestic Indoor Squares in Mixed-use building for relaxation. This study seeks to present a direction for designing an indoor square that uses the aspects of European city square. The following details consist the purpose of the study. First, Perspective from the Biophilic design and analyzing criteria of Europe city square. Second, European city square is analyzed to establish the criteria to be applied to indoor square. Third, based on European city square analysis, the planning direction for domestic indoor square is suggested. This result of paper proceeds as follows. First, it describes the analysis of the Indoor Squares of the domestic Mixed-use building. The results were derived of the fact that not applying the water elements and Facade greening. Second, In Europe Square, It is accounted for the highest proportion (33%) of the spaciousness. Third, Through a comparative analysis domestic indoor square was derived that the higher the need to improve the spaciousness and botanical motif. It is the ultimate goal of this study based on the analysis of the city square to set the criteria for the biophilic design of the indoor square to present the orientation of the indoor square.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.566-569
• /
• 2004

This study is to trace the change of stream shape using the past series of aerial photographs, and to compare the land use changes of riparian area along the stream. For the Gyeongan national stream, aerial photographs of 1966, 1981 and 2000 were selected and ortho photographs were made with interior orientation and exterior orientation, respectively. As apparent changes of the stream, the consolidated reaches of stream with levee construction were straightened and their stream widths were widened. Especially the stream width of inlet part of Paldang lake was widened almost twice because of the rise of water level by dam construction in 1974. The land use maps (1966, 1981,2000) of riparian areas were also made, respectively and classified into 6 categories (water, forest, agricultural land, urban area, road, sandbar) by digitizing. The area of forest and agricultural land decreased and urban area increased as the stream maintenance was performed.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.183-185
• /
• 2003

Spatially referenced mobile mapping (MM) images contain rich information of man-made objects , e.g. road centerlines, buildings, light poles, traffic signs ,billboards and line trees etc. Therefore, the applications in transportation, urban 3D reconstruction, utility management are implemented increasingly. It’s a fundamental issue lies in MM image process that how to orient this image in the object space including interior orientation of camera and the exterior orientation of image. In this paper, the algorithm of automatic acquirement of DC (Digital Camera) parameters based on MM images is illustrated. And then, the mapping between image space and object space for MM images is described.