• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.493-503
• /
• 1998

The sectional forming analysis considering bending effects from the geometrically deformed shape of two linear membrane finite elements(called super element) was performed under plane strain assumption for analyzing forming processes of an arbitrarily shaped draw-die. For the evaluation of bending effects, the bending equivalent forces are calculated from the bending moment computed using the changes in the interior angle at the middle node of super element, and are agumented to the membrane stretch forces. In order to verify the validity of the bending formulation, the simulation results for the stretch, draw, and bend sections were compared with membrane analysis results and measurements.

• 한국실내디자인학회논문집
• /
• 제14권6호
• /
• pp.29-36
• /
• 2005

The original members of the De Stijl group, formed in neutral Holland during the First World War, included the painters Piet Mondrian, Bart van Leck and Theo van Doesburg, and the architects J.J.P. Oud and Jan Wils. The aim of the group was to create a language of form and color applicable to every sphere of modern life. The means of expression selected by the De Stijl artists was rigorously restricted, using only vertical and horizontal lines with the right-angle created where they cross, and for color, black, white and the primaries- red, yellow and blue. Of these simple elements consisted the compositions painted by Mondrian and van Doesburg during the years around the end of the First World War, and the famous red-blue chair made by Gerrit Rietvelt in 1917. They did share a common influence, Cubism, and they both emphasized contemporaneity. Otherwise they were quite different movements, both in theory and practice, except lot one further point of similarity.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권7호
• /
• pp.468-474
• /
• 2000

This paper presents an investigation of the parameter modeling on the basis of Finite Element (FE) analysis in which the variable frequency characteristic in field weakening is considered in Interior Permanent Magnet Synchronous Motors (IPMSM). The parameters of IPMSM have nonlinear characteristics not only in accordance with the load variation but also with the current phase angle of a system fed inverter. From the results of FE analysis, the performances of torque and speed-power are simulated and the validity of the proposed FE analysis is compared with experimental results.

• KIEAE Journal
• /
• 제5권3호
• /
• pp.33-40
• /
• 2005

The existing building code regulates the minimum distance between buildings and the minimum required sunshine hours for winter solstice to ensure the right to light. Especially, the minimum sunshine hours have been guaranteed by the constitution after the right for the people to live in a healthy and comfortable environment was established. However, the existing regulation on the sunshine hours only considers the duration of sunshine hours, but ignores the minimum amount of sunlight. Therefore, the calculated sunshine hours are not coincident with the hours occupants actually feel. Therefore, the purpose of this study is to investigate the effect of solar incident angle on interior illuminance distribution, which will be used to propose a new code on the minimum sunshine hours and levels.

• 대한수학교육학회지:학교수학
• /
• 제17권1호
• /
• pp.35-46
• /
• 2015

본 논문에서는 우리나라와 일본의 초등학교 수학 교과서에서의 각 및 각도 지도 내용을 비교했다. 이러한 비교로부터 다음 다섯 가지를 우리나라 초등학교 수학과 교육과정 및 그에 따른 교과서에서의 각 및 각도 지도 내용 개선을 위한 시사점으로 제시한다. 첫째, 각의 정의 방식을 재고할 필요가 있다. 초등학교 수학에서 각을 정의할 때 이외에는 반직선을 사용하는 경우가 없고, 각을 정의하는 방식과 직각을 정의하는 방식은 일관되지 않는다. 둘째, 평면도형의 이동에서 돌리기를 $90^{\circ}$, $180^{\circ}$, $270^{\circ}$, $360^{\circ}$와 관련짓는 것을 고려할 필요가 있다. 이 둘을 관련시키는 것은 5학년에서 점대칭도형을 취급하는 것과도 연결된다. 셋째, 각의 크기 비교에서 '각의 크기가 같다'를 취급할 필요가 있다. 이것은 각의 크기를 비교하면서 두 각을 겹쳐보는 활동을 해 보는 것으로 가능하다. 넷째, 회전각의 도입을 고려할 필요가 있다. 회전각으로서의 $360^{\circ}$를 취급하는 것은 사각형의 내각의 크기의 합이 $360^{\circ}$임을 설명하는 것과 관련이 있다. 다섯째, 중학교 수학과 교육과정과 연계될 필요가 있다. '평각'은 중학교에서 사용하는 용어이다. 정다각형의 내각의 크기의 합을 구하는 것도 중학교에서 취급해야 하는 내용이다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.79-83
• /
• 1997

The inverter fed BLDC(Brushless DC) motor has been increasingly applied to industry and home appliances due to the advance of power electronics and permanent magnet technology, and its high efficiency and good acoustic noise characteristics. The BLDC motor and drives, however, require the rotor position sensors that may cause some problems such as the high cost and space. In this paper, sensorless algorithm for an interior permanent magnet BLDC motor is proposed. The maximum torque per ampere operation with advance angle considering load torque and speed was simulated and verified through the experiment.

• 한국의류학회지
• /
• 제15권3호
• /
• pp.229-238
• /
• 1991

The object of this study is to develope an improved version of brassiere with better fit and improved performance by conducting a try-on test on 6 types of revised brassieres (constructed on above basis). The study procedures consisted of a try-on test of experimentally constructed brassieres and a sensory test on fit. The results of experimentally constructed brassiere trial are as follows. 1. The sizes showing performance effects due to different types of experimentally construct- ed brassieres were bust length, bust height, under bust curve length, vertical and horizontal bust diamenter, upper-lower bust slope angle (direct measurement, parallel standard, upper torso tilt rate), side bust slope angle and top bust slope angle. 2. Concerning the changes in lower cup interior, elastic materials and wider portions perfor-med better in bust up effect. 3. No effects due to different shoulder strap positions were observed, but combined with lower cup interior changes the side types proved more effective than the standard types.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1806-1812
• /
• 2016

We propose an interior permanent magnet syhchronous motor (IPMSM) with arc-shape ferrite permanent magnets (PMs) as a substitute for the rare-earth permanent magnet, and determine its optimal design through parametric study. First, we use 2D finite element analysis to analyze 4-poles and 6-slots initial model according to performance requirements and design parameters. The current angle of the maximum average torque considered in the analysis is different compared with the current angle of the minimum torque ripple. Thus, the parametric study for optimal rotor design is performed by varying the thickness and the offset radius of the PMs according to current angle. In particular, a narrow bridge is required in conventional IPMSM for reducing flux leakage; however, the increase in cogging torque in the analysis model saturates the narrow bridge (large offset radius). Therefore, we suggest an appropriate shape considering limiting conditions such as DC link voltage, average torque, torque ripple, and cogging torque taking into account performance requirements.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1345-1351
• /
• 2013

Variable iron loss as function of current phase angle of Interior Permanent Magnet Synchronous Motor(IPMSM) was calculated through Curve Fitting Method(CFM). Also, a magnetic flux density distribution of iron core according to current phase angle was analyzed, and an iron loss calculation was performed including harmonic distortion. The experiment was performed by production of non-magnetizing model for the separation of mechanical loss, and the iron loss was calculated by the measurement of input using power analyzer and output power using dynamometer. Some error was generated between experimental results and calculation value, but an iron loss diminution according to current phase angle followed a same pattern. So, errors were generated by measurement, vibration, noise, harmonic distortion loss, etc.

• 전기학회논문지
• /
• 제62권2호
• /
• pp.171-176
• /
• 2013

Classically, reluctance torque of IPMSM(Interior Permanent Magnet Synchronous Motor) by using inductance according to current phase angle generates an error. This error is affected by total torque. From current phase angle $0^{\circ}$ to large errors will occur, because reluctance torque include current phase angle. But, reluctance torque from steady-state voltage equation of IPMSM is represented by linkage flux. So, reluctance torque is unrelated to the current phase angle formula can be derived. In this paper, operating torque was analyzed by d, q-axis linkage flux of IPMSM and reluctance torque to perform calculations reduced the error of the total torque calculation.