• 제목/요약/키워드: Interfering detection process

검색결과 10건 처리시간 0.019초

다중처리 시스템의 병렬성 증대를 위한 사이클의 비 지연 발견 기법 (A Zero-latency Cycle Detection Scheme for Enhanced Parallelism in Multiprocessing Systems)

  • 김주균
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제32권2호
    • /
    • pp.49-54
    • /
    • 2005
  • 본 논문에서는 즉시 할당 상태와 함께 단일 자원, 단일 요청의 가정 하에서 다중처리 시스템에서 사이클을 발생 즉시 발견함으로써 지연 없는 교차상태의 발견 방법을 소개한다. 기존의 방법과는 달리 제시된 방법은 n과 m으로 프로세스와 자원의 수론 나타낼 때 사이클의 발견에 O(1), 대기나 자원의 반납시에 O(n.m)의 시간을 요한다. 따라서 n과 m의 크기에 상관없이 교착상태를 발생 즉시 알 수 있으며, 이점이 다중처리 시스템의 특성과 잘 조화될 수 있음을 보였다. 교착상태와 연관된 응용환경에서 이러한 발견의 예측성과 비 지연성은 매우 유용할 것이다.

Low cost, highly sensitive and selective electrochemical detection of arsenic (III) using silane grafted based nanocomposite

  • Lalmalsawmi, Jongte;Zirlianngura, Zirlianngura;Tiwari, Diwakar;Lee, Seung-Mok
    • Environmental Engineering Research
    • /
    • 제25권4호
    • /
    • pp.579-587
    • /
    • 2020
  • Novel silane grafted bentonite was obtained using the natural bentonite as precursor material. The material which is termed as nanocomposite was characterized by the Fourier Transform Infra-red (FT-IR) and X-ray diffraction (XRD) methods. The surface imaging and elemental mapping was performed using Scanning Electron Microscopic (SEM/EDX) technique. The electroanalytical studies were performed using the nanocomposite electrode. The electroactive surface area of nanocomposite electrode was significantly increased than the pristine bentonite or bare carbon paste based working electrode. The impedance spectroscopic studies were conducted to simulate the equivalent circuit and Nyquist plots were drawn for the carbon paste electrode and nanocomposite electrodes. A single step oxidation/reduction process occurred for As(III) having ΔE value 0.36 V at pH 2.0. The anodic stripping voltammetry was performed for concentration dependence studies of As(III) (0.5 to 20.0 ㎍/L) and reasonably a good linear relationship was obtained. The detection limit of the As(III) detection was calculated as 0.00360±0.00002 ㎍/L having with observed relative standard deviations (RSD) less than 4%. The presence of several cations and anions has not affected the detection of As(III) however, the presence of Cu(II) and Mn(II) affected the detection of As(III). The selectivity of As(III) was achieved using the Tlawng river water sample spiked with As(III).

생식 · 발생독성시험의 방법적 고찰과 최신 연구 동향 (The Recommended Approaches and Recent Trends in Reproductive and Developmental Toxicology)

  • 곽승준;조대현
    • Toxicological Research
    • /
    • 제21권4호
    • /
    • pp.271-278
    • /
    • 2005
  • Reproductive and developmental toxicology is concerned with various physical or chemical agents interfering with fertility in both gender or normal growth of offsprings. Reproductive and developmental toxicology is rather a complex science, with many fields, i.e., various endpoints are involved and many different mechanisms of action. For that reason, diverse aspects must be considered when attempting to assess possible adverse health effects in the area of reproductive and developmental toxicology. The thalidomide tragedy made it clear to regulatory authorities around the world that systematic, comprehensive evaluation of the reproductive cycle was needed to adequately evaluate the potential of medicinal drugs to impair the process of reproduction or the development of embryos, fetuses, and children. International Conference on Harmonization of Technical Requirements for the Registration of Pharmaceuticals for Human Use (ICH) and U.S. Food and Drug Administration (FDA) developed a guideline to assess the reproductive and developmental toxicity. Also these guidelines have since been applied to the detection and regulation of environmental toxicants, food additives, and so on. Although it was hoped that testing procedures of guideline would be updated constantly to reflect the current state of the science in reproductive and developmental toxicology, it was not until this decade that regulatory guidelines and testing methods have been altered in a significant way. In this paper, we would like to present the recommended approaches and recent trends for improvement of testing guidelines or experimental methods in reproductive and developmental toxicology.

간섭 억제된 DS-CDMA 시스템에서의 시공간 직렬 연쇄 컨볼루션 차등 부호 기법 (Space-Time Concatenated Convolutional and Differential Codes with Interference Suppression for DS-CDMA Systems)

  • 양하영;신민호;송홍엽;홍대식;강창언
    • 대한전자공학회논문지TC
    • /
    • 제39권1호
    • /
    • pp.1-10
    • /
    • 2002
  • 다중 사용자 DS-CDMA 시스템에서 더 좋은 성능을 얻고자 컨볼루션 부호와 시공간 차등 부호의 직렬 연쇄 구조를 제안한다. 본 논문에서 시스템은 다중 접속 간섭(MAI ; Multiple-access Interference) 를 억제하기 위해 다른 사용자의 확산 코드, 동기, 그리고 전력 정보 등을 필요로 하지 않는 단일 사용자 검파기(SUD : Single User Detection) 를 고려한다. 채널 부호로 사용된 부호화율 1 과 메모리 수 1 을 가지는 차등 부호는 부호화로 인한 효율 저하를 가져오지 않으며 최소 상태수를 가지게 된다. 그리고 시공간 블록 부호를 통해 다중 안테나로 인한 다이버시티 이득을 얻게 된다. 이러한 시공간 직렬 연쇄 컨볼루션 차등 부호를 복호함에 있어서 서로간의 정보를 교환하는 반복 복호 처리를 이용한다. 실험 결과로부터 본 시공간 연쇄 부호 기법이 DS-CDMA 시스템에서 기존의 컨볼루션 부호보다 유사한 복잡도에서 더 나은 성능과 유연성을 제공함을 알 수 있다. 또한 제안한 기법이 SUD를 하는 DS-CDMA 시스템에 적용될 때, 처리이득(PG : Processing Gain) 이나 간섭 억제 여파기의 탭 개수의 증가에 따라 성능 향상이 일어나며, 원근 간섭 전력 문제가 심한 경우에 성능 저하가 일어남을 알 수 있다.

스크린 프린팅 기반 저가형의 플렉서블 칼륨 이온 센서 제조 및 이의 전기화학적 특성 (Fabrication of Low-cost and Flexible Potassium Ion Sensors based on Screen Printing and Their Electrochemical Characteristics)

  • 손선규;박홍준;김영균;조현상;최봉길
    • 공업화학
    • /
    • 제30권6호
    • /
    • pp.737-741
    • /
    • 2019
  • 본 연구에서는 스크린 프린팅 공정을 이용하여 저렴하고 유연한 칼륨 이온(K+) 센서를 제작하였다. 전도성 잉크의 균일한 코팅은 주사 전자 현미경 및 광학 현미경 측정에 의해 입증되었다. K+ 센서는 높은 감도, 빠른 응답 시간, 낮은 검출 한계를 보여주었다. 제조된 K+ 센서의 감도는 기계적으로 구부러진 상태에도 여전히 유지되었다. 히스테리시스 효과가 없는 우수한 반복성과 우수한 장기 안정성이 K+ 센서의 전기화학적 특성 분석에서 관찰되었다. 또한, K+ 센서는 다른 간섭 양이온이 존재하는 경우에도 정확하게 K+ 농도를 측정 할 수 있어 우수한 선택성을 증명하였다. 또한, 실제 스포츠 음료 샘플에서 K+ 농도의 성공적인 측정은 K+ 센서의 K+ 농도 값과 상용 K+ 미터를 비교하여 증명되었다.

능동 소오나에서 에스컬레이터 알고리즘을 이용한 잔향음 제거 기법 (A Reverberation Cancellation Method Using the Escalator Algorithm in Active Sonar)

  • 박경주;김수언;유경렬;나정열
    • 한국음향학회지
    • /
    • 제20권6호
    • /
    • pp.17-25
    • /
    • 2001
  • 기존의 적응형 잡음제거 기법을 적용하여 잔향음의 영향을 제거하는 경우, 수렴속도, 추적기능, 수치적 안전성, 표적신호와 잔향음 신호간의 상대적인 주파수 특성, 그리고 표적속도 등의 상호 배반적인 요인에 의하여 그 성능이 달라진다. 본 논문에서는 수렴속도, 연산량 그리고 검출능력 등의 요구조건들을 상호 보완하는 적응형 잔향음 제거 기법을 제안하였다. 본 논문에서 제안한 기법은 변환영역에서 동작하도록 설계하였으며, Gram-schmidt 직교화 과정을 적용하였고, 이를 에스컬레이터 알고리즘으로 구현하였다. 먼저 변환영역 알고리즘을 사용함으로써 수렴속도와 수치적 안전성 혹은 연산량 측면에서의 성능향상을 유도할 수 있다. 제안된 잔향음 제거 기법을 삼척시 연안에서 실측한 자료에 적용하여 그 성능을 검증하였다. 모의실험을 통하여 제안된 기법이 잔향음 신호에 근접한 주파수 대역의 표적신호를 보존하고, 정지표적과 이동표적에 대해서도 성능의 변화가 상대적으로 적으면서 효율적으로 잔향음을 제거한다는 사실을 확인하였다.

  • PDF

도로시설 재굴착 방지를 위한 의사결정모델 및 관리시스템 개발 (Development of Decision Model and Management System to minimize Pavement Utility Cut for Road Facility)

  • 조진영;장운성;이민재
    • 한국건설관리학회논문집
    • /
    • 제14권4호
    • /
    • pp.164-171
    • /
    • 2013
  • 도시개발에 있어 도로의 건설은 교통의 목적 외에 전기, 가스, 통신, 난방, 하수, 상수, 오수 등의 도시 편의시설을 위한 공간으로도 활용되고 있다. 하지만 현재 도로 시공과정에서 각 기능에 따른 관련 주체들이 진행되는 공사수행일정에 대한 의사소통이 충분히 이루어지지 않아 재굴착 작업이 빈번히 이루어지고 있으며 이로 인해 예산의 중복투입, 공사기간 지연, 품질저하, 이용자의 불편 등 여러 가지 문제점들이 나타나고 있다. 본 연구에서는 신도시 개발과 같은 대규모의 프로젝트에서 도로 재굴착으로 인한 문제를 사전에 예방하기 위해 시간과 공간데이터를 활용한 재굴착 방지 프로세스 모델을 개발하였으며, 이를 활용하여 도시기반시설 건설주체간 원활한 협의를 돕기 위한 재굴착방지시스템을 개발하였다. 아울러, 개발된 시스템을 개발중인 신도시 건설사업에 활용하여 그 적용성을 검토하였다.

탄소 및 은 잉크 기반의 전위차 나트륨 이온 센서 제조 및 이의 전기화학적 특성 (Fabrication of Potentiometric Sodium-ion Sensor Based on Carbon and Silver Inks and its Electrochemical Characteristics)

  • 김서진;손선규;윤조희;최봉길
    • 공업화학
    • /
    • 제32권4호
    • /
    • pp.456-460
    • /
    • 2021
  • 본 연구에서는 탄소 및 은 잉크를 사용하여 스크린 인쇄 공정을 통한 전위차 나트륨 이온(Na+) 센서를 제작하였다. 센서의 두 전극 구성은 Na+ 용액에서 네른스트 거동에 따라 전극의 전위차를 발생하였다. 제조된 Na+ 센서는 이상적인 네른스트 민감도, 빠른 응답 시간 및 낮은 검출 한계를 보여주었다. 네른스트 반응은 센서의 반복성 및 장기 내구성 테스트 시 안정적이었다. 탄소 전극에 코팅된 Na+ 선택막은 간섭 이온에 대해 나트륨 이온을 선택적으로 통과시켜 우수한 선택성을 증명하였다. 휴대용 Na+ 센서는 인쇄 회로 시스템을 사용하여 제작되었으며 다양한 실제 샘플에서 Na+ 농도를 성공적으로 측정하는 것을 증명하였다.

시료고체상분산(matrix solid phase dispersion)전처리법을 이용한 식육중 테트라사이클린계 항생물질 동시정량분석 (Multiresidue matrix solid phase dispersion (MSPD) extraction and HPLC determination of tetracyclines in animal muscle tissue)

  • 강환구;손성완;조병훈;이혜숙;박신자;김재학;조명행
    • 대한수의학회지
    • /
    • 제36권3호
    • /
    • pp.541-550
    • /
    • 1996
  • Tetracycline antibiotics have been widely used not only therapeutics but feed additives. There are many methods for the isolation and determination of tetracycline antibiotics in animal muscle tissue. But those methods take much time and labor, so it is difficult to analyse many samples simultaneously. A rapid isolation method and liquid chromatographic determination of tetracycline antibiotics in animal muscle tissue (bovine, porcine, chicken) is presented. Blank control and tetracyclines fortified samples (0.5g) were blended with $C_{18}$ containing 0.05g each of oxalic acid and disodium ethylenediaminetetraacetate. After homogenize, homogenate was transferred to glass column made from 10ml glass syringe and compressed to 4~4.5ml volume. A column made from the $C_{18}$/meat matrix was washed with hexane (8ml) and dichloromethane (8ml, if needed), following which the tetracyclines were eluted,vith methanol or 0.01M methanolic oxalic acid (8ml). The eluates containing tetracyclines analytes were free from interfering compounds when analysed by HPLC with UV detection (photodiode array at 360nm). Standard curve for each tetracycline showed a linear response at the range of $0.05{\sim}1.0{\mu}g/ml$ and tetracycline antibiotics were eluted within 4ml of eluted volume. All tetracycline antibiotics except tetracycline were stable during the concentration process at $40^{\circ}C$ and time required for concentration was 3~4 hours. Fortified samples containing oxalic aicd and EDTA represented more good recoveries than those of not-contained sample. Recoveries were 91.8~110.1% (oxytetracycline; OTC), 57.7~79.5% (tetracycline; TC), 78.1~88.6% (chlortetracyclines; CTC) and 88.4~100.6% (doxycycline; DC) in pork tissue, 101.1~126.8% (OTC), 66.4~75.4% (TC), 79.2~88.1% (CTC) and 69.3~86.7% (DC) in beef tissue, and 90.8~95.6% (OTC), 66.2~84.4% (TC), 75.7~77.2% (CTC) and 55.6~80.7% (DC) in chicken muscle tissue. The detection limits validated in muscle tissue by this method were $0.05{\mu}g/g$ for OTC and TC, and $0.1{\mu}g/g$ for CTC and DC.

  • PDF

전도성고분자, 티로시나아제 효소 및 이온성 액체 전해질을 융합한 전압전류법 기반의 비스페놀F 검출 센서 (Voltammetric Sensor Incorporated with Conductive Polymer, Tyrosinase, and Ionic Liquid Electrolyte for Bisphenol F)

  • 지성은;이상혁;이혜진
    • 공업화학
    • /
    • 제34권3호
    • /
    • pp.258-263
    • /
    • 2023
  • 본 연구에서는 일회용 센서 칩으로 제작 가능한 스크린 프린팅된 탄소칩 전극(screen printed carbon electrode; SPCE) 표면에 전도성고분자 및 효소 티로시나아제(tyrosinase, Tyr)를 적층하여 전기화학적인 방법으로 남성 질환, 갑상선 질환 등과 연관성이 입증된 내분비계 교란 물질인 비스페놀F (bisphenol F, BPF) 검출에 적용하였다. 산소 플라즈마 처리를 통해 음전하를 띠게 한 SPCE 작업전극 표면에 양전하를 띄는 전도성 고분자인 poly(diallyldimethyl ammonium chloride) (PDDA)과 음전하를 띠는 고분자 화합물 poly(sodium 4-styrenesulfonate) (PSS) 그리고 PDDA 순서대로 정전기적인 인력으로 층을 쌓고, 최종적으로 pH (7.0)를 조절하여 음전하를 띄게 한 효소, Tyr층을 올려 PDDA-PSS-PDDA-Tyr 센서를 제작하였다. 상기 전극 센서를 기질이자 타겟분석물인 BPF 용액에 접촉하면, 전극 표면에서 Tyr 효소와 산화반응에 의해 4,4'-methylenebis(cyclohexa-3,5-diene-1,2-dione)가 생성되고, 순환전압전류법과 시차펄스전압전류법을 이용하여 생성물을 0.1 V (vs. Ag/AgCl)에서 환원하면 4,4'-methylenebis(benzene-1,2-diol)이 생성되면서 발생하는 피크 전류 값의 변화를 측정함으로써, BPF의 농도를 정량적으로 분석하였다. 또한, 기존에 많은 연구에서 사용되는 인산완충생리식염수를 대체할 수 있는 이온성 액체 전해질을 사용하여 BPF의 검출 성능 결과를 비교하였다. 또한 BPF와 유사한 구조를 갖는 방해물질로 작용하는 비스페놀S에 대한 선택성을 확인하였다. 마지막으로 실험실에서 준비한 실제 시료안의 BPF의 농도를 분석하는데 제작한 센서를 적용함으로써 센서의 실제 적용 가능성을 입증하고자 하였다.