DOI QR코드

DOI QR Code

Development of Decision Model and Management System to minimize Pavement Utility Cut for Road Facility

도로시설 재굴착 방지를 위한 의사결정모델 및 관리시스템 개발

  • 조진영 (충남대학교 대학원, (주)한국씨엠씨 정부 세종청사 행복청 사업관리단) ;
  • 장운성 ((주)한국씨엠씨 정부 세종청사 행복청 사업관리팀) ;
  • 이민재 (충남대학교 토목공학과)
  • Received : 2013.04.09
  • Accepted : 2013.06.19
  • Published : 2013.07.31

Abstract

In urban planning, road facility is used not only for the transportation purpose but also for the utility line space purpose such as electrical, gas, tele communication, heating, water, sewer, and so on. However, since these utilities are built by many different groups, it becomes very difficult to communicate each other. Delay in one party can cause another party's schedule delay but they don't commuicate often. Also, some delay in utility work can cause frequent pavement cut. And, this will impact on construction cost, schedule delay, low quality, user complain and cost. This study developed spatiotemporal decision model to prevent prequent utility cut for mega project such as new urban development project. In addition, this study developed utility cut management system to manage utility cut schedule under pavement. Finally, developed system was applied to new urban development project and verified there effectiveness.

도시개발에 있어 도로의 건설은 교통의 목적 외에 전기, 가스, 통신, 난방, 하수, 상수, 오수 등의 도시 편의시설을 위한 공간으로도 활용되고 있다. 하지만 현재 도로 시공과정에서 각 기능에 따른 관련 주체들이 진행되는 공사수행일정에 대한 의사소통이 충분히 이루어지지 않아 재굴착 작업이 빈번히 이루어지고 있으며 이로 인해 예산의 중복투입, 공사기간 지연, 품질저하, 이용자의 불편 등 여러 가지 문제점들이 나타나고 있다. 본 연구에서는 신도시 개발과 같은 대규모의 프로젝트에서 도로 재굴착으로 인한 문제를 사전에 예방하기 위해 시간과 공간데이터를 활용한 재굴착 방지 프로세스 모델을 개발하였으며, 이를 활용하여 도시기반시설 건설주체간 원활한 협의를 돕기 위한 재굴착방지시스템을 개발하였다. 아울러, 개발된 시스템을 개발중인 신도시 건설사업에 활용하여 그 적용성을 검토하였다.

Keywords

References

  1. 김우영 (2006). "행정중심복합도시 건설의 종합사업관리방안." 정기학술발표대회 논문집, 제6권, 한국건설관리학회, pp. 29-36
  2. 권오성 (2000). "3차원 CAD기반의 지하공사 간섭관리시스템의 개발." 제20호 제1권, pp. 395-398
  3. 문현석 (2009). "건설공사의 작업공간 간섭관리 현황 분석 연구." 제35회 대한토목학회 정기학술대회, pp. 3519-3522
  4. 윤성오 (2012). "행정중심복합도시건설 종합사업관리(PM)시스템 운영현황." 건설관리, 제13권 제2호, 한국건설관리학회, pp. 28-32
  5. 조훈희 (2001). "4차원 CAD 기반의 지하공사 간섭관리 시스템 개발연구." 제17권 제9호, pp 225-232
  6. Blair, J. S. (2003). "Utility Relocations on Construction Projects: A Contractor's Perspective." 89th Annual Purdue Road School Conference, Purdue University, Lafayette, IN.
  7. Chou, C.C., Chen, Y.P., and Chiu, C.M. (2008) "Managing Utility Installation/Maintenance Activities in Advance to Reduce Pavement Utility Cuts Using Spatiotemporal Objects Database." Journal of Airfield and Highway Pavements, American Society of Civil Engineers(ASCE), pp 397-409
  8. Chou, C.C., Caldas, C.H., and O'Connor, J.T. (2007) "Decision Support System for Combined Transportation and Utility Construction Strategy." Transportation Research Record: Journal of the Transportation Research Board, 1994, pp. 9-16 https://doi.org/10.3141/1994-02
  9. Guting R.H., and Schneider, M. (2005) Moving Objects Databases, Morgan K., San Francisco, CA
  10. Khogali, W.E.I., and Mohamed, E.H. (1999) "Manageing Utility Cuts: Issues and Considerations." APWA International Public Works Congress, NRCC/CPWA.
  11. Tarakji, G. (1995). "The Effect of Utility Cuts on the Service Life of Pavements in San Francisco", Engineering Design Center, San Francisco State University
  12. Wilde, W.J., Grant, C., and White G.T. (2003) "Controlling and Reducing The Frequency of Pavement Utility Cuts." Transportation Research Board Annual Meeting, Washington, D.C.
  13. Wolfson, O. (2002) "Moving Objects Information Management: The Database Challenge." Lecture Notes in Computer Science, Springer Berlin / Heidelberg, 2382, pp. 15-26