• 한국전문물리치료학회지
• /
• 제7권2호
• /
• pp.66-75
• /
• 2000

A single subject experimental design (alternating treatment design) was used to compare the effects of Mulligan method and electrotherapy on the pain and limitation of range of motion in patients with frozen shoulder. In the Mulligan method sessions, the physiotherapist performed a posterior and caudal glide on the patient while the patient was performing shoulder flexion and abduction. In the electrotherapy sessions, the patient received ultrasound and interference current treatments. Mulligan method and electrotherapy were alternately performed on each patient. Pain was measured by visual analogue scale (VAS) and range of motion (ROM) was measured by modified finger ladder. The results showed that both Mulligan method and electrotherapy were effective in pain reduce and ROM increase, but Mulligan method was superior to electrotherapy in ROM increase while electrotherapy was superior to Mulligan method in pain reduce.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권4호
• /
• pp.359-362
• /
• 1996

A study was conducted to assess the influence of copper on the total sulphur amino acid requirements of broiler chickens reared under two growing periods. The TSAA levels used were 0.73, 0.83, 0.93% with copper levels of 0, 125, 250 and 375 mg/kg for the starter period and the TSAA levels of 0.72, 0.79 and 0.86% with copper levels of 0, 125, 250 and 375 mg/kg for the grower period. Total feed consumption, body weight gain and feed L gain ratio were used as the parameters for the assessment. The results showed that adding copper at 250 mg/kg to the diets improved feed : gain ratio of the starter broilers and resulted in small improvement of body weight gain and feed : gain ratio of the grower broilers. Growth was depressed in relation to the reduction of feed intake on the chicks fed diet containing 375 mg/kg copper. There was a significant interaction between dietary TSAA and copper levels for feed intake, hence, indicating that the supplementation of copper at the level of 375 mg/kg increased the TSAA requirement of the starter broilers, although no interference with the requirement of grower broilers.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.411-421
• /
• 2017

An approach based on a 2D lumped model is presented to quantify the voltage transfer gain (VTG) in power converter low power planes. The advantage of the modeling approach is the ease with which typical noise reduction devices such as decoupling capacitors or ferrite beads can be integrated into the model. This feature is enforced by a new modular approach based on effective matrix partitioning, which is presented in the paper. This partitioning is used to decouple power plane equations from external device impedance, which avoids the need for rewriting of a whole set of equation at every change. The model is quickly solved in the frequency domain, which is well suited for an automated layout optimization algorithm. Using frequency domain modeling also allows the integration of frequency-dependent devices such inductors and capacitors, which are required for realistic computation results. In order to check the precision of the modeling approach, VTGs for several layout configurations are computed and compared with experimental measurements based on scattering parameters.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 학술대회 논문집 전문대학교육위원
• /
• pp.154-158
• /
• 2006

The switching-mode power converter has been widely used because of its features of high efficiency and small weight and size. These features are brought by the ON-OFF operation of semiconductor switching devices. However, this switching operation causes the surge and EMI(Electromagnetic Interference) which deteriorate the reliability of the converter themselves and entire electronic systems. This problem on the surge and noise is one of the most serious difficulties in AC-to-DC converter. Random Pulse Width Modulation (RPWM) is peformed by adding a random perturbation to switching instant while output-voltage regulation of converter is performed. RPWM method for reducing conducted EMI in single switch three phase discontinuous conduction mode boost converter is presented. The more white noise is injected, the more conducted EMI is reduced. But output-voltage is not sufficiently regulated. This is the reason why carrier frequency selection topology is proposed. In the case of carrier frequency selection, output-voltage of steady state and transient state is fully regulated. A RPWM control method was proposed in order to smooth the switching noise spectrum and reduce it's level. Experimental results are verified by converter operating at 300v/1kW with $5%{\sim}30%$ white noise input. Spectrum analysis is performed on the Phase current and the CM noise voltage. The former is measured with Current Probe and the latter is achieved with LISN, which are connected to the spectrum analyzer respectively.

• 전자공학회논문지B
• /
• 제31B권11호
• /
• pp.27-35
• /
• 1994

본 논문에서는 디지털 고밀도 저장 장치의 비선형성 감소를 위한 변형된 형태의 PRML에 대하여 논한다. 기록 채널에서 자속간의 비선형 상호 작용을 감소시킬 수 있는 비선형 보상기를 갖는 PRML을 제안하고, 세 종류의 다른 밀도를 갖는 기록 채널에 제안된 방식을 적용한다. 모의 실험을 통해 기존의 PRML과 성능을 비교함으로서 기록의 고밀도화에 따라 증가하는 비선형 심볼간 간섭이 본 논문에서 제안된 비선형 보상기를 갖는 PRML에 의해 효율적으로 감소될 수 있음을 확인한다.

• 대한전자공학회논문지TC
• /
• 제41권11호
• /
• pp.81-86
• /
• 2004

부호분할다중접속(CDMA: Code Division Multiple Access) 시스템의 역방향링크에서 수신 빔 성형 기법을 사용할 경우, 빔 성형 이득을 얻는 반면 전력 제어에 의해 불충분한 파일롯 전력으로 인해 채널 추정이 부정확해진다. 이 논문에서는 상관된 단일-입력 다중-출력(SIMO: Single-Input Multiple-Output) 채널에서 불충분한 파일롯 전력으로 인한 문제를 해결하기 위한 수신 빔 성형 방식을 제안하고자 한다. 제안된 복합형 빔 성형 방식(hybrid beamformer)은 수신 안테나들을 그룹 지어서, 각 그룹 당 수신 빔 방향(DOA: Direction-of-Arrival) 기반의 빔 성형 후에, 그룹별 출력을 최대 비 결합(MRC: Maxim Ratio Combining)하는 방식으로, 공간적으로 상관된 SIMO 채널의 디버시티 이득을 얻으면서 더 정확한 채널추정과 간섭제거 효과를 제공한다. 배열 안테나의 수가 여섯 개 이상인 경우, 복합형 빔 성형 방식은 빔 수신 각 범위(AOS: Angle-of-Spread)가 30°이하에서 일반적인 MRC 빔 성형 방식보다 더 좋은 성능을 보인다.

• 대한전자공학회논문지SD
• /
• 제39권2호
• /
• pp.39-45
• /
• 2002

본 논문에서는 PDP 시스템에서의 새로운 EMI(전자파) 예측 방법을 제시한다. AC PDP 시스템을 정확하게 기술할 수 있는 새로운 AC PDP 셀 회로 모델을 개발하였다. 개발한 모델과 Hertzian 다이폴 안테나 모델을 결합하여 PDP 시스템에서 방출되는 EMI를 정량적으로 계산하였다. 시뮬레이션 결과는 테스트 패널을 이용한 실험을 통하여 검증되었다. AC PDP 시스템은 CISPR 13에 준거하여 반 무반향실에서 30㎒∼300㎒의 주파수 대역에서 측정하였다. 따라서 제시된 EMI 예측방법은 EMI와 관련한 PDP 시스템 설계에 유용하게 사용될 수 있다.

• 한국광학회지
• /
• 제17권4호
• /
• pp.323-328
• /
• 2006

디지털 홀로그램에서 영상 재현 시 영차 회절광에 의한 잡음으로 신호대 잡음비가 좋은 영상을 구현하기 어렵다. 이와 같은 이유로 디지털 홀로그램이 여러 분야에 응용되는 것이 어렵다. 영차 회절광 제거를 위하여 많은 노력이 이루어져 왔다. 본 연구에서는 영차 회절광의 영향을 줄이기 위한 홀로그램 데이터를 스캐닝 방법으로 획득하여 수치적 처리를 통하여 영상을 재현하는 실험 연구를 하였다. 그 결과 본 연구에 사용된 방법이 영차 회절광의 효과를 줄이면서 해상도도 유지 할 수 있는 방법임을 알았다.

• 한국전자파학회지:전자파기술
• /
• 제4권3호
• /
• pp.18-29
• /
• 1993

장거리 초고속 단일모드 광파이버 전송 시스템에서, 색분산은 복조된 파형의 찌그러짐을 생기게 하며, 그 결과 수신된 신호 간 간섭을 일으켜 전송 시스템의 성능을 저하시킨다. 본 논문에서는 강도변조-직접검파 시스 댐의 색분산제한을위상변조에서 진폭변조로의 전환잡음의 영향을고려함으로서 연구하였다. 파이버 색분산에 의한 위상-진폭으로의 전환잡음을 잡음전력 스펙트럼 밀도를 유도함으로서 분석하였으며 위상-진폭 전환잡음을 피하기 위한 시스댐 전력손실과 레이저 선폭에 대한 요구조건을 수치해석을 통하여 구하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.209-212
• /
• 2005

Recently, since structures have become extremely airtight with the development of high-rise apartments, mixed use residential and commercial buildings and offices, large capacity range hoods have become commonly implemented. However, the high noise level caused by this range hood system made of thin plate is the cause of increased complaints among users. In this study, the level of noise emitted from this type of range hood was measured by height at the user's location in the kitchen. It was confirmed that a great deal of noise was emitted in the downward direction of the hood. In order to minimize the noise emitted from this type of range hood, a new type of fan was manufactured. This was done by changing only the material and shape of the fan, since it was determined to be the primary source of noise emission. Then a comparison and evaluation were carried out regarding the noise characteristics between the new type of fan and the existing type of fan. As a result, it was confirmed that the noise from the new fan was reduced by more than 2 dB compared to the existing fan without noise interference at the discharge end.