• Analytical Science and Technology
• /
• v.28 no.3
• /
• pp.228-235
• /
• 2015

The efficiency and applicability of the solid phase extraction disk method in a ²²⁶Ra analysis were examined by the gamma ray spectrometer (GRS) method using a Marinelli beaker and the liquid scintillation counter (LSC) method for groundwater. The recovered ²²⁶Ra, which was filtered by the solid phase extraction disk, was analyzed using gamma ray spectrometer The disks, which were pretreated for caulking the daughter nuclide, were sealed with polyethylene film. Distilled water was used for the blank value of the ²²⁶Ra activity. The recovery values of ²¹⁴Bi and ²¹⁴Pb in the solid phase extraction disk, which used ²²⁶Ra standard material, were 80% (295.21 Kev) and 104% (351.92 Kev), respectively, which were higher than 75% determined by the LSC. The injection of nitrogen gas into the measuring chamber reduced the interference values by about 10%. The detection limits of the ²²⁶Ra activity in a blank sample of 5 L were 0.17~0.40 pCi/L after 80,000 seconds of measuring time. The relationship of the ²²⁶Ra activity in the solid phase extraction disk method and in the LSC method in seven groundwater samples showed a correlation coefficient value 0.987, which implies the applicability of the solid phase extraction disk method. The results showed that ²²⁶Ra activity in groundwater using the solid phase extraction disk method has the following benefits: simple pretreatment, time saving, high recovery values, a low detection limit, and so on. Compared with the LSC method and the GRS method using the Marinelli beaker for the ²²⁶Ra analysis, the solid phase extraction disk method could be useful in groundwater samples with low levels of activities of radionuclides because the method is not restricted by the volume of the sample.

• Journal of the Korean Chemical Society
• /
• v.44 no.5
• /
• pp.422-428
• /
• 2000

Optimum analytical conditions of the aluminium ion were established by flow injection analysis. Eriochrome Cyanine R(ECR) dye reacts with the aluminium ion at pH 6.0 to form a complex that exhibits maximum absorption at 535 nm. Reaction conditions including the mixing and the reaction coil length, the concentration and the pH of the buffer solutio, temperature, and injection loop volume were optimized to intro-duce this reaction into flow injection analysis. The results were as follows. A mixing coil length of 0.5 m and a reaction coil length of 4.0 m, the pH 6.0 and 1M of acetate buffer solution, the ECR concentration of 0.56 mM, the reaction temperature of 40$^{\circ}C$, the injection loop volume of 300${\mu}L$ were chosen as optimum conditions. Under these conditions the detection limit of the aluminiumion was less than 0.05 mg/L and the repeatability was better than 1%. A sampling frequency of 24 times for an hour was achieved. Interfering ions such as $F^-$, HP$O_4^{2-}$, $Fe^{2+}$, $Fe^{3+}$, $Mn^{2+}$, and other anions were tested, interference did not occur up to 1,000mg/L of ion concentration and up to 2,CO0mg/L of sulfate ion con-centration. This method was applied for the determination of aluminium ion in tap water and ground water of Jeonju and the Gochang area. The results showed that the aluminium residual in tap water of the Jeonju area was at a mean of 0.478mg/L and that in tap water of the Gochang area was at a mean of 0.278mg/L. Aluminium ion residual of the tap waters in the Jeonju area was higher level than that in the Gochang area. Aluminium residual in the ground water of the Jeonju area was 0.386 mg/L and was lower compared to 0.564 mg/L for the Gochang area.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.35-44
• /
• 2017

A gamma-ray peak of $^{226}Ra$ (186.2 keV) overlaps with one of $^{235}U$ (185.7 keV) in a gamma-ray spectrometry system. Though reference peaks of $^{235}U$ can be used to correct the peak interference of $^{235}U$ in the analysis of $^{226}Ra$, this requires a complicated calculation process and a high limit of quantitation. On the other hand, evaluating $^{226}Ra$ using the correction constant in the overlapped peak can make a rapid measurement of $^{226}Ra$ without the complicated calculation process as well as overcome the disadvantage in the indirect measurement of $^{214}Bi$, which means the confinement of $^{222}Rn$ gas in a sample container and a time period to recover the secular equilibrium. About 93 samples with 6 species for raw-materials and by-products were prepared to evaluate the activity of $^{226}Ra$ using the correction constant. The results were compared with the activity of $^{214}Bi$, which means the indirect measurement of $^{226}Ra$, to validate the method of the direct measurement of $^{226}Ra$ using the correction constant. The difference between the direct and indirect measurement of $^{226}Ra$ was generally below about ${\pm}20%$. However, in the case of the phospho gypsum, a large error of about 50% was found in the comparison results, which indicates the disequilibrium between $^{238}U$ and $^{226}Ra$ in the materials. Application results of the contribution ratio of $^{226}Ra$ were below about ${\pm}10%$. The direct measurement of $^{226}Ra$ using the correction constant can be an effective method for its rapid measurement of raw materials and by-products because the activity of $^{226}Ra$ can be produced with a simple calculation without the consideration of the integrity of a sample container and the time period to recover the secular equilibrium.

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.1-14
• /
• 2010

It is of importance that all countries in worldwide, including EU and China, have adopted the Restrictions on the use of certain Hazardous Substances (RoHS) for all electronics. IEC62321 document, which was published by the International Electronics Committee (IEC) can have conflicts with the standards in the market. On the contrary Publicly Accessible Specification (PAS) for sampling published by IEC TC111 can be adopted for complementary application. In this work, we tried to find a route to disassemble and disjoint cellular phone sample, based on PAS and compare the screening methods available in the market. For this work, the cellular phone produced in 2001, before the regulation was born, was chosen for better detection. Although X-ray Fluorescence (XRF) showed excellent performance for screening, fast and easy handling, it can give information on the surface, not the bulk, and have some limitations due to significant matrix interference and lack of variety of standards for quantification. It means that screening with XRF sometimes requires supplementary tool. There are several techniques available in the market of analytical instruments. Laser ablation (LA) ICP-MS, energy dispersive (ED) XRF and scanning electron microscope (SEM)-energy dispersive X-ray (EDX) were demonstrated for screening a cellular phone. For quantitative determination, graphite furnace atomic absorption spectrometry (GF-AAS) was employed. Experimental results for Pb in a battery showed large difference in analytical results in between XRF and GF-AAS, i.e., 0.92% and 5.67%, respectively. In addition, the standard deviation of XRF was extremely large in the range of 23-168%, compared with that in the range of 1.9-92.3% for LA-ICP-MS. In conclusion, GF-AAS was required for quantitative analysis although EDX was used for screening. In this work, it was proved that LA-ICP-MS can be used as a screening method for fast analysis to determine hazardous elements in electrical products.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.12
• /
• pp.4773-4780
• /
• 2014

Background: To investigate the effects of small interference RNA (siRNA) targeting BCR/ABL mRNA on proliferation and apoptosis in the K562 human chronic myeloid leukemia (CML) cell line and to provide a theoretical rationale and experimental evidence for its potential clinical application for anti-CML treatment. Materials and Methods: The gene sequence for BCR/ABL mRNA was found from the GeneBank. The target gene site on the BCR/ABL mRNA were selected according to Max-Planck-Institute (MPI) and rational siRNA design rules, the secondary structure of the candidate targeted mRNA was predicted, the relevant thermodynamic parameters were analyzed, and the targeted gene sequences were compared with BLAST to eliminate any sequences with significant homology. Inhibition of proliferation was evaluated by MTT assay and colony-formation inhibiting test. Apoptosis was determined by flow cytometry (FCM) and the morphology of apoptotic cells was identified by Giemsa-Wright staining. Western blotting was used to analyze the expression of BCR/ABL fusion protein in K562 cells after siRNA treatment. Results: The mRNA local secondary structure calculated by RNA structure software, and the optimal design of specific siRNA were contributed by bioinformatics rules. Five sequences of BCR/ABL siRNAs were designed and synthesized in vitro. Three sequences, siRNA1384, siRNA1276 and siRNA1786, which showed the most effective inhibition of K562 cell growth, were identified among the five candidate siRNAs, with a cell proliferative inhibitory rate nearly 50% after exposure to 12.5nmol/L~50nmol/L siRNA1384 for 24,48 and 72 hours. The 50% inhibitory concentrations ($IC_{50}$) of siRNA1384, siRNA1276 and siRNA1786 for 24hours were 46.6 nmol/L, 59.3 nmol/L and 62.6 nmol/L, respectively, and 65.668 nmol/L, 76.6 nmol/L, 74.4 nmol/L for 72 hours. The colony-formation inhibiting test also indicated that, compared with control, cell growth of siRNA treated group was inhibited. FCM results showed that the rate of cell apoptosis increased 24 hours after transfecting siRNA. The results of annexinV/PI staining indicated that the rate of apoptosis imcreased (1.53%, 15.3%, 64.5%, 57.5% and 21.5%) following treamtne with siRNAs (siRNA34, siRNA372, siRNA1384, siRNA1276 and siRNA1786). Morphological analysis showed td typical morphologic changes of apoptosis such as shrunken, fragmentation nucleus as well as "apoptotic bodies" after K562 cell exposure to siRNA. Western blot analysis showed that BCR/ABL protein was reduced sharply after a single dose of 50nmol/L siRNA transfection. Conclusions: Proliferation of K562 cells was remarkbly inhibited by siRNAs (siRNA1384, siRNA1276 and siRNA1786) in a concentration-dependent manner in vitro, with effective induction of apoptosis at a concentration of 50 nmol/L. One anti-leukemia mechanism in K562 cells appeared that BCR/ABL targeted protein was highly down-regulated. The siRNAs (siRNA1384, siRNA1276 and siRNA1786) may prove valuable in the treatment of CML.

• Korean Journal of Environment and Ecology
• /
• v.12 no.4
• /
• pp.373-380
• /
• 1999

The Byokryon-Daejangbong valley forest in Keumsan area at Hallyo-Haesang National Park was studied to investigate forest structure in relation to altitude and part of the slope. Forty-eight quadrats were set up in the valley forest along altitude of 200m to 650m and part of the slope. Density, mean DBH, and basal area of the canopy trees were 820~1873trees/ha, 10.7~14.6cm, and 17.7~22.2$\m^2$/ha, respectively. With increasing elevation mean DBH and basal area of tree stratum increased while density of tree stratum decreased. As elevation increased the importance values of Quercus mongolioa, Styrax japonica, Acer pseudo-sieboldiannum, and Sorbus alnifolia increased while those of Pinus thunbergii, Pinus densiflora, Prunus sargentii, Cornus kousa, and Eurya japonica decreased. The importance values of Fraxinus sieboldiana, Quercus variabilis, and Sorbus alnifolia increased as going from lower part to upper part of the slope. However, the opposite trend was found for the importance values of Styrax japonica, Lindera erythrocarpa, and Zelkova serrata, With incresing elevation number of species, species diversity, and evenness incresed and it was suggested that man interference was relatively severe. The range of similarity indices between elevation belts and between parts of the slope were 42.0~71.8% and 74.8~76.8%, respectively. According to importance values and cluster analysis, the studied valley forest was classified into four forest communities of Quercus serrata-Pinus densiflora community in low elevation belt, Carpinus laxiflora-deciduous tree species community in high elevation belt and lower and middle parts at middle elevation belt, Quercus variabilis-Carpinus laxiflora community in upper part at middle elevation belt, and Quercus mongolica-Styrax japonica community in top area. There were significantly positive correlation among Quercus serrata, Pinus densiflora, Pinus thunbergii, and Eurya japonica and among Carpinus laxiflora, Zelkova serrata, and Cornus walteri.

• Clinical and Experimental Reproductive Medicine
• /
• v.34 no.4
• /
• pp.293-303
• /
• 2007

Objective: Previously, we identified differentially expressed genes between GV and MII stage mouse oocytes using ACP technology. When we study one of GV selective genes, Obox family, we found Obox4 mRNA expression in ovaries that has been reported as expressed exclusively in testis. Therefore, this study was conducted for characterization and functional analysis for Obox4. Methods: Expression of Obox4 mRNA was examined in gonads and oocytes by RT-PCR. To determine the role of Obox4 in oocyte maturation, Obox4 dsRNA was microinjected into the cytoplasm of GV oocytes followed by 16 h of incubation in the plain medium or by 24 h of incubation in the medium containing IBMX. After RNAi, phenotypes and maturation rates were observed, change in mRNA expression was evaluated, and chromosomal status was confirmed by orcein staining. Results: Obox4 has minimal expression in the ovary compared to that of the other family members. When oocytes were cultured for 16 h in M16 medium after RNAi, maturation rate was not changed significantly, compared with that of non-injected or buffer-injected control oocytes. Surprisingly, however, when oocytes were cultured for 24 h in M16 containing IBMX, in which oocytes were supposed to arrest at GV stage, Obox4 RNAi oocytes were advanced to MI and MII. Spindle structure was disappeared and the chromosomes were condensed in the oocytes after Obox4 RNAi. Conclusions: This is the first report on the expression of Obox4 in the ovary and oocytes. Results of the study suggest that Obox4 plays a crucial role in spindle formation and chromosome segregation during meiosis in oocytes. In addition, Obox4 may play an important role in cAMP-dependent signal cascades of GV-arrest in mouse oocytes.

• Analytical Science and Technology
• /
• v.29 no.4
• /
• pp.170-178
• /
• 2016

Accuracy and precision of ID methods for different spike isotopes of ⁷⁶Se, ⁷⁷Se, and ⁷⁸Se were compared for the analysis of Selenium using quadrupole ICP/MS equipped with Octopole reaction cell. From the analysis of Se inorganic standard solution, all of three spikes showed less than 1 % error and 1 % RSD for both short-term (a day) and long-term (several months) periods. They showed similar results with each other and ⁷⁸Se showed was a bit better than ⁷⁶Se and ⁷⁷Se. However, different spikes showed different results when NIST SRM 1568a and SRM 2967 were analyzed because of the several interferences on the m/z measured and calculated. Interferences due to the generation of SeH from ORC was considered as well as As and Br in matrix. The results showed similar accuracy and precisions against SRM 1568a, which has a simple background matrix, for all three spikes and the recovery rate was about 80% with steadiness. The %RSD was a bit higher than inorganic standard (1.8 %, 8.6 %, and 6.3 % for ⁷⁸Se, ⁷⁶Se and ⁷⁷Se, respectively) but low enough to conclude that this experiment is reliable. However, mussel tissue has a complex matrix showed inaccurate results in case of ⁷⁸Se isotope spike (over 100 % RSD). ⁷⁶Se and ⁷⁷Se showd relatively good results of around 98.6 % and 104.2 % recovery rate. The errors were less than 5 % but the precision was a bit higher value of 15 % RSD. This clearly shows that Br interferences are so large that a simple mathematical calibration is not enough for a complex-matrixed sample. In conclusion, all three spikes show similar results when matrix is simple. However, ⁷⁸Se should be avoided when large amount of Br exists in matrix. Either ⁷⁶Se or ⁷⁷Se would provide accurate results.

• Korean Journal of Breeding Science
• /
• v.50 no.4
• /
• pp.463-471
• /
• 2018

Perilla is an oilseed crop cultivated in Korea since ancient times. Due to the high ${\alpha}-linolenic$ acid content in perilla, perilla seed oil can easily become rancid. ${\alpha}-Linolenic$ acid is synthesized by two enzymes, endoplasmic reticulum-localized ${\Delta}15$ desaturase (FAD3) and chloroplast-localized ${\Delta}15$ desaturase (FAD7) in vivo. In order to lower the ${\alpha}-linolenic$ acid content of the seed oil without disturbing plant growth, we tried to suppress the expression of only the FAD3 gene using RNA interference, whilst maintaining the expression of the FAD7 gene. Seventeen transgenic plants with herbicide ($Basta^{TM}$) resistance were obtained by Agrobacterium-mediated transformation using hypocotyls of perilla plants. The transgenic plants were firstly confirmed by treatment with 0.3% (v/v) $Basta^{TM}$ herbicide, and the expression of FAD3 was measured by Northern blot analysis. The ${\alpha}-linolenic$ acid content was 10-20%, 30-40%, and 60% in two, seven, and three of the twelve $T_1$ transgenic perilla plants which had enough seeds to be analyzed for fatty acid composition, respectively. Analysis of the fatty acid composition of $T_2$ progeny seeds from $T_1$ plants with the lowest ${\alpha}-linolenic$ acid content showed that the homozygous lines had 6-10% ${\alpha}-linolenic$ acid content and the heterozygous lines had 20-26% ${\alpha}-linolenic$ acid content. It is expected that the reduction in ${\alpha}-linolenic$ acid content in perilla seed oil will prevent rancidity and can be utilized for the production of high-value functional ingredients such as high ${\gamma}-linolenic$ acid.

• Journal of Ginseng Research
• /
• v.47 no.3
• /
• pp.408-419
• /
• 2023

Background: Ginsenoside compound K (CK), the main active metabolite in Panax ginseng, has shown good safety and bioavailability in clinical trials and exerts neuroprotective effects in cerebral ischemic stroke. However, its potential role in the prevention of cerebral ischemia/reperfusion (I/R) injury remains unclear. Our study aimed to investigate the molecular mechanism of ginsenoside CK against cerebral I/R injury. Methods: We used a combination of in vitro and in vivo models, including oxygen and glucose deprivation/reperfusion induced PC12 cell model and middle cerebral artery occlusion/reperfusion induced rat model, to mimic I/R injury. Intracellular oxygen consumption and extracellular acidification rate were analyzed by Seahorse multifunctional energy metabolism system; ATP production was detected by luciferase method. The number and size of mitochondria were analyzed by transmission electron microscopy and MitoTracker probe combined with confocal laser microscopy. The potential mechanisms of ginsenoside CK on mitochondrial dynamics and bioenergy were evaluated by RNA interference, pharmacological antagonism combined with co-immunoprecipitation analysis and phenotypic analysis. Results: Ginsenoside CK pretreatment could attenuate mitochondrial translocation of DRP1, mitophagy, mitochondrial apoptosis, and neuronal bioenergy imbalance against cerebral I/R injury in both in vitro and in vivo models. Our data also confirmed that ginsenoside CK administration could reduce the binding affinity of Mul1 and Mfn2 to inhibit the ubiquitination and degradation of Mfn2, thereby elevating the protein level of Mfn2 in cerebral I/R injury. Conclusion: These data provide evidence that ginsenoside CK may be a promising therapeutic agent against cerebral I/R injury via Mul1/Mfn2 mediated mitochondrial dynamics and bioenergy.