• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.4
• /
• pp.77-84
• /
• 2004

Active control is regarded as one of the most efficient and economic countermeasures to reduce excessive vibration of ship superstructure. However, it is difficult to find its practical application in real ships in spite that many studies on such systems have been done. In this study, for the practical use of an active control system to reduce ship superstructure vibration, we have developed an active vibration compensator consisting of a mechanical actuator having compact size and expected lifetime over 20 years, its control panel including exclusive signal processing and computing board, sensors to detect phase and vibration, and its operation software providing various user-interface functions. From the performance verification test of the system at a 5,500 TEU container carrier, we have confirmed the system could reduce ship superstructure vibration of a harmonic component of main engine rotating frequency up to 0.1 mm/s.

• Korean Journal of Agricultural Science
• /
• v.40 no.1
• /
• pp.53-59
• /
• 2013

Analysis of load data during field operations is highly important for optimum design of power drive lines for agricultural tractor. Objective of the paper was to analyze field load data using FFT to determine frequency and the energy levels of meaningful cyclic patterns. Rotary tillage, plowing, baling, and wrapping operations were selected as major field operations of agricultural tractor. An agricultural tractor with power measurement system was used. The tractor was equipped with strain-gauge sensors to measure torque of four driving axles and a PTO axle, speed sensors to measure rotational speed of the driving axles and an engine shaft, pressure sensors to measure pressure of hydraulic pumps, an I/O interface to acquire the sensor signals, and an embedded system to calculate power requirement. In rotary tillage, calculated frequency was decreased as travel speed increased. In baler operation, calculated frequency was increased as PTO speed was increased. The calculated peak frequency levels and expected levels were similar. Results of the study would provide information on power utilization patterns and on better design of power drive lines.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.18-26
• /
• 1992

This paper describes a design model for conceptual design of ship. Existing design models have some problems. For example, operating environment of batch versions can not reflect design procedure of real world truely and reliability of results are not high because means of performance estimation are based only on empirical formula. To improve these problems of existing design models, a new design model has been developed. The new model consists of interactive environment with databases of main engine and existing ship data. To develop user-oriented system, graphic user interface(GUI) is adapted.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.9
• /
• pp.531-538
• /
• 2005

This paper proposes an expert system which is able to enhance the accuracy and productivity by determining the test strategy based on heuristic rules for test of the hybrid electronic circuit board producted massively in production line. The test heuristic rules are obtained from test system designer, test experts and experimental results. The guarding method separating the tested device with circumference circuit of the device is adopted to enhance the accuracy of measurements in the test of analog devices. This guarding method can reduce the error occurring due to the voltage drop in both the signal input line and the measuring line by utilizing heuristic rules considering the device impedance and the parallel impedance. Also, PSA(Parallel Signature Analysis) technique Is applied for test of the digital devices and circuits. In the PSA technique, the real-time test of the high integrated device is possible by minimizing the test time forcing n bit output stream from the tested device to LFSR continuously. It is implemented in Visual C++ computer language for the purpose of the implementation of the inference engine using the dynamic memory allocation technique, the interface with the electronic circuit database and the hardware direct control. Finally, the effectiveness of the builded expert system is proved by simulating the several faults occurring in the mounting process the electronic devices to the surface of PCB for a typical hybrid electronic board and by identifying the results.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.11
• /
• pp.1457-1463
• /
• 1999

This paper develops an real-time expert system for the electronic interlocking system. it obtains the higher safety by determining the railway interlocking strategy in order to prevent trains from colliding, and derailing in the viewpoint of veteran expert, considering the situation of station in real-time. The expert system determines the real-time interlocking strategy by confirming the interlocking relationships among signal facilities based on the interlocking knowledge base from input information such as signal, points, and it is implemented as the rule-based system in order to represented accurately and effectively the interlocking relationships. Especially in case of emergency the function which determines the rational route coordinating with IIKBAG on the workstation is designed in order to minimize the spreading effect. It is implemented in C computer language for the purpose of the implementation of the inference engine using the dynamic memory allocation technique, the build and interface of the station structure database. And, the validity of the built expert system is proved by simulating the diversity cases which may occur in the real system for the typical station model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.873-878
• /
• 2004

An expert system for stroke diagnosis was designed in this study. The causes of stroke in the central nervous systems are very diverse, symptoms may not appear in the early stage, so diagnosis ran be difficult. Also, doctors who treats patients with stroke must have expert knowledge for the quick and correct impending diagnosis. Therefore, an expert system for assisting the impending diagnosis of stroke has needed to be developed. In addition, the diagnosis system can be used as an simulator for medical students who study neurology. In this study, and diagnosis expert system was developed. It serves a pathological data bus provided by an interface. An inference engine makes an impending diagnosis of stroke possible. We implemented the system using Windows2000 Server, IIS5.0 and ASP.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.9
• /
• pp.2189-2196
• /
• 2014

In this paper, a VLIW(Very Long Instruction Word) vision coprocessor which can efficiently accelerate computer vision algorithm for automotive is designed. The VLIW coprocessor executes four instructions per clock cycle via 8-stage pipelined structure and has 36 integer and floating-point instructions to accelerate computer vision algorithm for pedestrian detection. The processor has about 300-MHz operating frequency and about 210,900 gates under 45nm CMOS technology and its estimated performance is 1.2 GOPS(Giga Operations Per Second). The vision system composed of vision primitive engine and eight VLIW coprocessors can execute pedestrian detection at 25~29 frames per second(FPS). Because the VLIW coprocessor has high detection rate and loosely coupled interface with host processor, it can be efficiently applicable to a wide range of vision applications.

• Genomics & Informatics
• /
• v.3 no.3
• /
• pp.68-73
• /
• 2005

Pharmacogenomics research requires an intelligent integration of large-scale genomic and clinical data with public and private knowledge resources. We developed a web-based knowledge base for KPRN (Korea Pharmacogenomics Research Network, http://kprn.snubi. org/). Four major types of information is integrated; genetic variation, drug information, disease information, and literature annotation. Eighteen Korean pharmacogenomics research groups in collaboration have submitted 859 genotype data sets for 91 disease-related genes. Integrative analysis and visualization of the large collection of data supported by integrated biomedical path­ways and ontology resources are provided with a user-friendly interface and visualization engine empowered by Generic Genome Browser.

• The KIPS Transactions:PartA
• /
• v.8A no.4
• /
• pp.411-418
• /
• 2001

This paper describes the design and implementation of a home network management system through a web browser. All digital devices are connected to a set-top box on which personal java environment is installed through an IEEE1394 serial bus. The embedded web server on the set-top box supports persistent-connection of HTTP1.1 and servlet engine for JSDK2.1. The home network management system is developed as the form of a servlet and uses JNI to access IEEE1394 device driver\`s APIs. When a client selects an icon related with a device the user interface applet of the device is downloaded into a client\`s web browser and communicates with a related servlet through TCP/IP APIs.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.190-200
• /
• 2011

Android platform provides a content provider and a cursor mechanism to access the internal SQLite engine. Content providers not only store and retrieve data but also make it accessible to applications. Applications can only share data through content provider, since there's no common storage area that Android packages can access. Cursor is an interface that provides random read-write access to the result set returned by a database query. However, this cursor possesses two major limitations. First, a cursor does not support a join clause among cursors, since the cursor can only access a single table in the content provider. Second, the cursor is not capable of creating user-customized field in the predefined content providers. In this paper, we propose the unified cursor architecture that merges several cursors into a single virtual cursor. Cursor translation look-aside buffer (TLB), column windowing mechanism and virtual data management are the three major techniques we have adopted to implement our structure. And we also propose a delayed synchronization method between an application and a proposed unified cursor. An application can create a user-customized field and sort multiple tables using a unified cursor on Android platform.