• The Journal of Information Systems
• /
• v.32 no.2
• /
• pp.153-176
• /
• 2023

Purpose As non-face-to-face work environments become common due to COVID-19, interest in online collaboration tools that can communicate smoothly without time and space limitations is continuously increasing. Most of the prior studies are about the introduction, use intention, and satisfaction of cloud computing-based collaboration tools, and studies on the effects of collaboration tools on work-life balance and quality of life are somewhat lacking. Therefore, in this study, the characteristics of cloud computing-based collaboration tools were derived, and the effect on job satisfaction during work and job stress outside of working hours was confirmed. Design/methodology/approach This study applied the S-O-R framework and conducted an online survey of office workers who used cloud computing-based collaboration tools for more than three months. Hypotheses were tested using structural equations. Findings As a result of the analysis, among the characteristics of collaboration tools, stability, usefulness, and interoperability had higher job satisfaction as more stimuli were applied. In addition, the higher the job satisfaction during work, the higher the job performance, work-life balance, and quality of life.

• Korea Trade Review
• /
• v.47 no.2
• /
• pp.89-101
• /
• 2022

International remittances play a crucial role in the economic management of each country, especially in developing countries. Its functions are diverse, including procurement of foreign currency, serving as a cushion for the balance of payments and foreign exchange reserves by reducing the adverse external shocks, driving economic growth, easing the gap between the rich and the poor, and maintaining macroeconomic stability. However, previous studies on remittances have mainly focused on macro-and micro-economic aspects to analyze the determinants. Therefore, this study attempts to identify the determinants of remittances in 122 countries over the past 25 years from macroeconomic and educational aspects as well as institutional qualities. In addition, given the fact that almost all of the world's top 10 recipient countries in terms of GDP and total remittance size are developing countries, developed and developing countries are separated and analyzed for comparison, assuming that there may be a difference between the two groups. Results show that the coefficients of developed and developing countries are different in four areas: Control of Corruption (CC), Rule of Law (RL), Voice and Accountability (VA), and Regulatory Quality (RQ) among the six institutional variables of interest in this study. These results implicate that even the same institutions and policies should be applied and implemented differently depending on the circumstances of each country. In addition, as suggested by the World Bank, policymakers in all countries should double their policy efforts to lower the costs of remittance and improve access to the financial system for immigrants or dispatched workers to ensure a steady inflow of remittances.

• Journal of Life Science
• /
• v.22 no.7
• /
• pp.863-870
• /
• 2012

Rhodopsin, a dim light photoreceptor, has been regarded as one of the model systems for the structural and functional study of G protein-coupled receptors (GPCRs). Constitutively active mutant GPCRs leading to the activation of heterotrimeric GDP/GTP-binding protein signaling in the absence of ligand binding are of interest for the study of the activation mechanism in GPCRs. The present study focused on the opsin mutant E134Q/M257Y, which showed a moderate level of constitutive activity and the formation of two distinct rhodopsin chromophores with absorption maxima of 500 nm and 380 nm, depending on the presence of an inverse agonist, 11-cis-retinal, and an agonist, all-trans-retinal, respectively. Reconstitution of the mutant rhodopsin upon incubation with different ratios of 11-cis-retinal and the all-trans-retinal, as well as upon sequential binding of the two retinals, indicated its preferential binding to 11-cis-retinal. The thermal stability of the 11-cis-retinal-bound form of the E134Q/M257Y mutant was lower than that of the mutants containing a single replacement but higher than that of the all-trans-retinal-bound forms. The mutant also showed a lower stability in its opsin state as compared with that of the wild-type opsin but had little effects on the binding affinity to 11-cis-retinal. Information obtained in this study will be helpful for analyzing the structural changes associated with the activation of rhodopsin and GPCRs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.5
• /
• pp.594-605
• /
• 2006

Statement of problem: Modification of titanium implant surface has potential to ensure clinically favorable performance that several surface modification technologies have been introduced. Among the methods. anodizing method and sol-gel hydroxyapatite coating method have gained much interest due to its roughness and chemical composition of the coating layer, but more of its biocompatibility result is required. Purpose : The purpose of this study was to compare bone-implant interface shear strength of four different surface treated implants as time elapsed. Resonance frequency analysis(RFA) and removal torque measurement methods were employed to measure implant stability at one week and six week after implantation. Material and method: A total of 80 screw-shaped implant [20 machined, 20 resorbable media blasted(RBM), 20 anodized, and 20 anodized+hydroxyapatite sol-gel coated] were prepared, and one of each group was implanted in the tibia of a New Zealand white rabbit that total 20 of them were used. In order to test the implant stability and implant-tissue interface contact changing in the bone bed, each 10 rabbit were sacrificed 1 week and 6 week later while resonance frequency and removal torque were measured. One-way analysis of variance and the Tukey test were used for statistical analysis. Results : The results were as follows. 1. There was no statistically significant difference of implant stability quotients(ISQ) value in RFA between individual groups after 1 week of implantation and 6 weeks(p>0.05). But, there was statistically significant increase of ISQ value in 6 weeks group compared to 1 week group(p<0.05). 2. There was no statistically significant difference in removal torque analysis between individual groups after 1 week of implantation and 6 weeks(p>0.05). but there was statistically significant increase in all 4 groups after 6 weeks compared to 1 week later(p<0.05). 3. There was no statistically significant difference in removal torque analysis between anodized group and HA coating after anodic oxidation 6 weeks later(p>0.05), but significant difference was appeared in both groups compared to RBM group and smooth-machined group(p<0.05). Conclusions : It can be suggested that changes in surface characteristics affect bone reactions. Anodized and anodized+hydroxyapatite sol-gel coating showed significantly improved bone tissue response to implants, but further study on the effect of hydroxyapatite dissolution is needed.

• 한국벤처창업학회:학술대회논문집
• /
• 2007.11a
• /
• pp.327-352
• /
• 2007

The loan rate of the government loan program offered by the Small Business Corporation(SBC) can be determined as a sum of three factors such as a reference interest rate, a policy aim spread, and a credit risk spread. However the loan rate has been lower than the loan rate in the banking sector. The profit has continually run in the red figures and hence the stability the fund managed by the SBC has been damaged. Even though a policy aim spread could be emphasized, the stability and profitability of the fund should be prioritized. This means that the loan rate of the SBC should be determined such that the loss might not be occurred. This requires the policy aim spread to change from relatively large negative to near zero.

• Explosives and Blasting
• /
• v.35 no.3
• /
• pp.31-54
• /
• 2017

In the countries operating nuclear reactors, the development of high-level radioactive waste(HLW) disposal technique is considered as an urgent and important issue for sustainable utilization of nuclear energy. In Korea, in which a low and intermediate radioactive waste repository is already operating, the construction of an underground research laboratory for in situ validation studies became a matter of interest with increasing concerns on the management of HLW. In order to construct and to operate an underground HLW repository safely in deep underground, the stability of rock mass should be guaranteed. As an important factor on rock stability, excavation damaged zone (EDZ) has been studied in many underground research laboratories in foreign countries. For accurate evaluation of the characteristics and effects of EDZ under disposal condition, it is required to use reliable investigation method based on the analysis of previous studies in similar conditions. In this study, status of foreign underground research laboratories in other countries, approaches for investigation the characteristics, size, and effect of EDZ, and major findings from the researches were surveyed and reported. This will help the accomplishment of domestic researches for developing HLW management techniques in underground research laboratory.

• Journal of National Security and Military Science
• /
• s.8
• /
• pp.239-270
• /
• 2010

This thesis is to make an appropriate national defense policy of Republic of Korea through studying the Hegemony Strategy of United States. I searched the theory of hegemony. The hegemony was differently defined by the point of time and region. The strong power nations with the hegemony have been making efforts to maintain their hegemony everytime. I have conclusion that the presence of hegemony once emerged, it brought regional stability in place whether it is coercive or beneficial. The stability and instability of international order IS not exclusively dependent on hegemony. Even if the safety of hegemony cannot guarantee absolute stability of international order, there IS on doubt that the hegemony has enormous impact on that. According to the hegemonic theory, the history of mankind equals to the history of rising and falling hegemony. The international order was changed as the hegemony changes. The United States has been making efforts to maintain her global hegemony during the post cold-war era as well. Taking all these into consideration, relevant military strategy direction able to pursue national interest is that to make up for the relative weakness in the strategic environment. South Korea have to prepare security policy response as following. First, South Korea should build the military force equipped with advanced weapons in military technology sector and solidify military diplomatic relation able to form cooperative relation in wartime. Second, South Korea should make solid Alliance of Korea and U.S. Third, develop and maintain multilateral security cooperation of East Asia. Forth, we could realize that there are means that can neutralize opponent's strong point by seeking one or two and more asymmetry in the aspect of strategy, tactics, and means through asymmetric strategy. Than the military force of South Korea should develop into a force that is able to overcome to the traditional North Korea's threat and new type of conflicts. And the force should have sufficient strength and be deployed to effectively defend the Korean Peninsula. So, we need to establish a denial and defense system against any hostile neighboring country. Therefore, ROK military forces preparing for the future should try to construct a future military power to gradually establish enough strength for self-defense to prepare for a uncertain security environment and when the Korean Peninsula is unified in a future.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.5
• /
• pp.201-208
• /
• 2016

Ceramic pigments, which show good thermal and chemical stabilities, have been applied for various industry with development of digital printing technology. Ceramic inkjet printing has advantages of high efficiency of ink usage and eco-friendly process. Thus, the interest of the ceramic pigments with various function and color including CMYK (cyan, magenta, yellow, black) digital primary color is increasing. Here, we investigated the thermal and chemical stabilities of white ceramic pigment for digital inkjet printing process. The microstructure and crystal structure of MgO, $Al_2O_3$, $MgAl_2O_4$, $CeO_2$ were analyzed, and the stability with glaze were evaluated. In order to evaluate the applicability for digital inkjet printing, the chemical stability of white ceramic pigments at high temperature was investigated by characterization of the mixed color properties with CMYK ceramic pigments after firing process.

• Applied Chemistry for Engineering
• /
• v.35 no.2
• /
• pp.122-127
• /
• 2024

Cosmetic preservatives are an important class of ingredients in terms of ensuring sustainable use and providing customer satisfaction. Recently, a great deal of interest has been drawn to the production and use of toxic-free, naturally derived preservatives. In this work, a new naturally derived preservative (laurimino bispropanediol, LB) was developed to replace the most widely used diol preservatives, such as 1,2-hexanediol or 1,2-octanediol. The basic properties of the obtained preservative were measured, and the solution behavior of the preservative in an aqueous medium was examined. The feasibility of micelle formation in the preservative solution was investigated using the fluorescence (FL) based pyrene method. Micelle formation was feasible owing to the relatively long hydrophobic chains and increased hydroxyl groups in the preservative molecules. The emulsification capability of the preservative was assessed using the Rosano and Kimura method, showing that the preservative possessed emulsifying capability in an organic solvent (benzene) and soy bean oil. In addition, the dispersion stability of cosmetic formulations, including the new LB preservatives such as essence and lotion, was demonstrated by comparing the light transmittance of the formulations. This article provides important information for future research regarding the synthesis and practical applications of new toxic-free naturally derived preservatives.

• Journal of Korea Water Resources Association
• /
• v.47 no.5
• /
• pp.459-468
• /
• 2014

Groyne to control the direction and velocity of flow in rivers is generally installed for the purpose of protecting riverbanks or embankments from erosion caused by running water. In particular, as interest in river restoration and natural river improvement increases, groynes are proposed as a key hydraulic structure for local flow control and riparian habitat establishment. Groynes are installed mainly in groups rather than as individual structures. In case of groynes installed as a group, flow around the groynes change according to spacing in between the groynes. Therefore, groyne spacing is regarded as the most important factor in groyne design. This study aimed at examining changes of flows around and within the area of groynes that take place according to the spacing of groynes installed in order to propose the optimal spacing for upward groynes. To examine flow characteristics around groynes, this study looked at flows in main flow area and recirculation flow area separately. In main flow area, it examined the impact of flow velocity increasing as a result of conveyance reduction that is exerted on river bed stability in relation to changes in the maximum flow velocity according to installation spacing. As a factor causing impacts on scouring and sedimentation within the area of groynes, recirculation flow in the groyne area can lead problems concerning flow within the area and stability of embankment. As for recirculation area, an analysis was conducted on the scale of rotational flow and the flow around embankment that exerts impacts on stability of the embankment. In addition, a comparative analysis was carried with reference to changes of the central point of rotational flow that occur within the area of groynes. As a result of compositely examining the results, the appropriate installation spacing is proposed as min. four times-max. six times considering a decrease in flow velocity according to the installation of upward groynes, river bed stability and stability of embankments against counterflow within the area of groynes.