• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.6
• /
• pp.469-475
• /
• 2014

The roll to roll (RTR) imprint process is an integrated imprinting process where steps ranging from assignment of a function to a flexible rolled substrate to rewinding of the same substrate in a roll are performed. RTR imprint is a green, low-cost technology without limitations. In RTR imprint, it is important to manufacture the mold precisely and maintain uniform process condition. To this, process conditions have to include precision tension control, optimization of process parameters. We introduced RTR imprint to fabricate planar lightwave circuit (PLC) device for communication, by new schematic design and process optimization, we fabricated successfully optical device. The fabricated optical device showed the optical performance which was satisfied to meet international standard.

• ETRI Journal
• /
• v.38 no.6
• /
• pp.1240-1249
• /
• 2016

With the number of IP cores in a multicore system-on-chip increasing to up to tens or hundreds, the role of on-chip interconnection networks is vital. We propose a networks-on-chip-style bus network as a compromise and redefine the exploration problem to find the best IP tiling patterns and communication path combinations. Before solving the problem, we estimate the time complexity and validate the infeasibility of the solution. To reduce the time complexity, we propose two fast exploration algorithms and develop a program to implement these algorithms. The program is executed for several experiments, and the exploration time is reduced to approximately 1/22 and 7/1,200 at the first and second steps of the exploration process, respectively. However, as a trade-off for the time saving, the time cost (TC) of the searched architecture is increased to up to 4.7% and 11.2%, respectively, at each step compared with that of the architecture obtained through full-case exploration. The reduction ratio can be decreased to 1/4,000 by simultaneously applying both the algorithms even though the resulting TC is increased to up to 13.1% when compared with that obtained through full-case exploration.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.2
• /
• pp.138-143
• /
• 2004

CMP (Chemical Mechanical Polishing) technology for global planarization of multilevel interconnection structure has been widely studied for the next generation devices. Among the consumables for CMP process, especially, slurry and their chemical compositions play a very important role in the removal rates and within-wafer non-uniformity (WIWNU) for global planarization ability of CMP process. However, CMP slurries contain abrasive particles exceeding 1 ${\mu}{\textrm}{m}$ size, which can cause micro-scratch on the wafer surface after CMP process. Such a large size particle in these slurries may be caused by particle agglomeration in slurry supply-line. In this work, to investigate the effects of agglomeration on the performance of oxide CMP slurry, we have studied an aging effect of silica slurry as a function of particle size distribution and aging time during one month. We Prepared and compared the self-developed silica slurry by adding of alumina powders. Also, we have investigated the oxide CMP characteristics. As an experimental result, we could be obtained the relatively stable slurry characteristics comparable to aging effect of original silica slurry. Consequently, we can expect the saving of high-cost slurry.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.4
• /
• pp.72-81
• /
• 2011

In this paper, we propose adaptive convergence security policies and management technologies to improve security assurance in the home networking environment. Many security issues may arise in the home networking environment. Examples of such security issues include the user privacy, the service security, the integrated networking security, the middleware security and the device failure. All these security issues, however, should be fulfilled in phase due to many difficulties including deployment cost and technical complexity. For instance, fundamental security requirements such as authentication, access control and prevention of crime and disaster should be addressed first. Then, supplementary security policies and diverse security management technologies should be fulfilled. In this paper, we classify these requirements into three categories, a service authentication, a user authentication and a device authentication, and propose security policies and management technologies for each requirement. Since the home gateway is responsible for interconnection of many home devices and external network access, a variety of context information could be collected from such devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5B
• /
• pp.356-363
• /
• 2008

The decision of the USA to found the USF(Universal Service Fund) in 1983, which was aiming to support basic telecommunication services provision at affordable price in rural and high cost areas, has triggered many countries to introduce universal service support mechanisms. Korea has been also operating a universal service support mechanism since 2000 but there are lively controversies on the change of the existing support mechanism. This paper, first, will review universal service support mechanisms in major countries including USA, EU, Chile, Peru and Japan. Second, this paper will classify types of the mechanisms and review merits and demerits of the mechanisms. Finally, this paper will derive some implications for the improvement of domestic Mechanism.

• The KIPS Transactions:PartA
• /
• v.12A no.6 s.96
• /
• pp.499-506
• /
• 2005

Recently, Hyper-Star network HS(m,k) which improves the network cost of hypercube has been proposed. In this paper, we show that the bisection width of regular Hyper-Star network HS(2n,n) is maximum (2n-2,n-1). Using the concept of container, we also show that k-wide diameter of HS(2n,n) is less than dist(u,v)+4, and the fault diameter is less than D(HS(2n,n))+2, where dist(u,v) is the shortest path length between any two nodes u and v in HS(2n,n), and D(HS(2n,n)) is its diameter.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.3
• /
• pp.236-242
• /
• 2004

In this paper, we propose an approach to parallelize a load balancing algorithm that was shown to be very effective in distributing workload for parallel computations. Load balancing algorithms are required in executing parallel program efficiently As a parallel computation model, we used dynamically growing tree structure that can be found in many application problems. The load balancing algorithm tries to balance the workload among processors while keeping the communication cost under certain limit. We show how the load balancing algorithm is effectively parallelized on mesh and hypercube interconnection networks, and analyzed the time complexity for each case to show that parallel algorithm actually reduced the various overhead.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.321-322
• /
• 2007

In order to increase the cost effectiveness of solar cells, module production should be treated more comprehensively. Back contact cells offer distinct advantage in the interconnection of cells to modules. Thereby Mo thin film were prepared in order to clarify optimum conditions for growth of the thin film depending upon process, and then by changing a number of deposition conditions and substrate temperature conditions variously, structural and electrical characteristics were measured. For the manufacture of the Mo were vapor-deposited in the named order. Among them, Mo were vapor-deposited by using the sputtering method in consideration of their adhesive force to the substrate, and the DC power was controlled so that the composition of Mo, while the surface temperature having an effect on the quality of the thin film was changed from R.T$[^{\circ}C]$ to $200[^{\circ}C]$ at intervals of $50[^{\circ}C]$. Micro-structural studies were carried out by XRD (D/MAX-1200, Rigaku Co.) and SEM (JSM-5400, Jeol Co.). Electrical properties were measured by CMT-SR3000 Measurement System.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.93-99
• /
• 2021

The government has proposed a mission to enhance intelligent power networks, decrease coal-fired generation, expand distributed energy resources, and promote energy prosumer into the distribution network in Korea. Installation cost of facility expansion to guaranteed interconnection with small distributed energy resources increases dramatically on KEPCO's distribution sector. And it is hard to withdraw in time. In addition, there are explicit research is required to meet the reliability on grid corresponding to the increase of distributed power. Infrastructure support for accommodating energy prosumer is also needed. Therefore, KEPCO is pushing transition to DSO by expanding distribution management scope and changing its roles. In addition, KEPCO is proactively preparing for integrated operation between distribution network and existing distributed power which is accommodated passively. KEPCO is also trying to accept multiple network users, e.g. building platforms, to manage a data and promote new markets. In the long term, transition to DSO will achieve saving investment costs for accommodating distributed sources and maintaining stable electrical quality. And it will be possible to create new business model using the platform to secure revenue.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.2
• /
• pp.177-187
• /
• 2000

In the past several years, many systems which adopted ring topology with high-speed unidirectional point-to-point links have emerged to overcome the limit of bus for interconnection network of clustered multiprocessor system. However, rapid increase of processor speed and performance improvement of local bus and memory system limit scalability of system with point-to-point link of standard bandwidth. Therefore, necessity to extend bandwidth is emphasized. In this paper, we adopt PANDA system as base model, which is clustering-based multiprocessor system. By simulating a model adopting commercial processor and local bus specification, we show that point-to-point link is bottleneck of system performance, and bandwidth expansion by more than 200% is needed. To expand bandwidth of interconnection network, it needs excessive design cost and time to develop new point-to-point link with doubled bandwidth. As an alternative to double bandwidth, we propose several ways to implement dual ring -simple dual ring, transaction-separated dual ring, direction-separated dual ring- by using off-the-shelf point-to-point links with IEEE standard bandwidth. We analyze pros. and cons. of each model compared with doubled-bandwidth single ring by simulation.