• Journal of Korean Society on Water Environment
• /
• v.27 no.1
• /
• pp.36-43
• /
• 2011

This study is selected two points of combined sewer that occurred Fish Kill after first flush, that analyzed generation of pollutants and stream runoff generation of combined sewer overflows (CSOs) as fine weather and rainfall. In addition, this study was to analyze the relationship between CSOs and sediments, to propose measures to reduce the sediment relevant with CSOs and rainfall runoff from entering sewage treatment plants and measures for discharged directly into streams when indicate relatively good water quality after overflow. Sediments in combined sewer system was discharged about 50~80% as overflows during rainfall and we can reduce the amount of the CSOs at least 50% or more if the sewer does not exist in the sediments because of the amount of discharge about the amount of intercept has been investigated by 3~5 times. Because of velocity at sediment interval in sewer is very low, sewage velocity of about 3~5 times as much as it can increase the amount of sediment can be reduced if the separation wall is installed. Effective control of BOD overflow load is respectively 77.5%, 75.8% at first point, second point by the separation wall is installed. Drainage area greater than area in this study or many combined sewer overflows region is increased the more effective control of separation wall. Turbidity to measure changes in water quality of overflows can be used as an factor to control the intercept flows because the intercept flows(3Q) after the first flush has lowered removal efficiency and increases the operational load of sewage treatment plants. Sewage water quality after a overflow when the reasonable turbidity was measured at this point flows to excluded intercept flow(1Q) can be discharged to stream.

• Journal of the Institute of Convergence Signal Processing
• /
• v.25 no.1
• /
• pp.1-6
• /
• 2024

The main function of intercept array sonar is to detect pulses radiated from enemy surface ships, submarines, and torpedoes. When a pulse is detected, it is a high risk situation for the own ship, so it is very important to find the target's location for the ship's maneuverability and survival. The target's location is calculated by finding the starting point of the pulse received form each sensor and calculating the time delay between sensors. In order to find starting point, the envelope of the signal is calculated and differential filtering is performed. However, since intercept array sonar has a high sampling frequency of the signal, the number of samples to be processed is large, so this process has a problem with a large computational amount. In this paper, we propose a pulse starting point calculation method using decimation for reducing computational amount. Simulations were performed while changing the decimation factor, and it was confirmed that computational amount was reduced. The proposed method is expected to be effective in real-time processing system and have advantages in resource utilization.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.6
• /
• pp.906-911
• /
• 2001

In this paper, LPI(low probability of intercept) and AJ(anti jamming) performance of the chirped BPSK system are analyzed. In the chirp method the cyclostationary of the signal is eliminated, since the instantaneous frequency is varied randomly within the whole spread bandwidth. Therefore, chirp method is considered for good LPI system against DAM(delay-and-multiplier) or SC (squaring circuit) interceptor which detects the chip rate or carrier frequency. Longer chirp duration makes the LPI performance better. From the simulation results, the chirp method has better AJ performance than DS(direct sequence) system in the PBNJ(partial band noise jammer) channel. At the same JSR(jammer to signal power ratio) level, chirped BPSK system has more robust AJ performance against MTJ(multi-tone jammer) than PBNJ.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.79-86
• /
• 2016

Physical layer security is cryptography technique to protect information by using physical nature of signals. Currently, many works on physical layer security have been actively researching while those researching models still have some problems to be solved. Eavesdropper does not share its channel state information with legitimate users to hide its presence. And when node transmits signal, hardware impairments are occurred, whereas many current researches assume that node model is ideal node and does not consider hardware impairments. The main features and contributions of this paper to solve these problems are as follows. First, our proposed system model deploys torch node around legitimate user to obtain channel state information of eavesdropper and considers hardware impairments by using channel state information of torch node. Second, we derive closed-form expression of intercept probability for the proposed system model. The results of the performance evaluation through various simulations to find out the effects on proposed system model in physical layer security show that imperfect channel state information does not effect on intercept probability while imperfect node model effects on intercept probability, Ergodic secrecy capacity and secrecy capacity.

• Journal of the Korea Society for Simulation
• /
• v.29 no.3
• /
• pp.57-72
• /
• 2020

To respond to the threat of Long range artillery of North Korea, it is necessary to establish the Korean counter long range artillery intercept system(CLRAIS). The purpose of this study is to study the operational concept of the CLRAIS against the threat of long range artillery of North Korea, and to develop the operational effectiveness process of the CLRAIS. First, we set up the operating concept of the CLRAIS and established the concept of an effectiveness in a many-to-many engagement situation and a process to derive it. Based on this, a tool was developed to analyze the actual effectiveness. In order to find out the factors influencing the effectiveness in many-to-many engagement situations, simulation experiments were performed by combining various variables such as detection assets, engagement control, and launchpad performance. As a result, it was found that in addition to the missile performance, the performance of the detection assets and the engagement control center had a significant impact on the intercept rate and the defense success rate. These findings can be used to understand important indicators in terms of effectiveness in many-to-many engagement situations in the future development of weapon system, and to determine the development direction and target value of each element necessary for the level of defense success rate to be achieved.

• Journal of Korean Society of Forest Science
• /
• v.99 no.5
• /
• pp.770-776
• /
• 2010

This study was conducted to assess the existing flora and fauna, and to develop a spatial map of Alapang communal forest located in the province of Benguet, Philippines. A total of 52 species belonging to 27 families were identified during the inventory in this communal forest using the quadrat method while a total of 30 species belonging to 18 families were recorded using line intercept technique for the assessment of grasses, herbs, vines and other low-lying vegetation. The diversity index of the species in Alapang communal forests using the quadrat method was 2.6649 while for the line intercept technique it was 2.5446. The most dominant species in this area was found to be Pinus kesiya Royle ex Gordon (Benguet pine) under Family Pinaceae with an importance value of 106.74%. In the faunal assessment, four species of birds and a small mammal particularly a rodent were identified during the study. Aside from the high species diversity of this communal forest, the presence of endemic and indicator species in the area denotes that this forest was still in good condition hence must be protected. Spatial maps and database system were generated based from data gathered in the field using Geographic Information System (GIS).

• ETRI Journal
• /
• v.35 no.3
• /
• pp.546-549
• /
• 2013

A Ka-band 6-W high power microwave monolithic integrated circuit amplifier for use in a very small aperture terminal system requiring high linearity is designed and fabricated using commercial 0.15-${\mu}m$ GaAs pHEMT technology. This three-stage amplifier, with a chip size of 22.1 $mm^2$ can achieve a saturated output power of 6 W with a 21% power-added efficiency and 15-dB small signal gain over a frequency range of 28.5 GHz to 30.5 GHz. To obtain high linearity, the amplifier employs a class-A bias and demonstrates an output third-order intercept point of greater than 43.5 dBm over the above-mentioned frequency range.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.697-708
• /
• 2017

The complex battlefield environment makes it difficult to intercept maneuvering targets for guided missiles. In this paper, a finite-time convergent (FTC) guidance law based on the second-order sliding mode (SOSM) control theory is proposed to achieve the requirements of stability, accuracy and robustness. More specifically, a second-order sliding mode observer (SMOB) is used to estimate and compensate for the total disturbance of the controlled system, while the target acceleration is extracted from the line-of-sight (LOS) angle measurement. The proposed guidance law can drive the LOS angular rate converge to zero in a finite time, which means that the missile will accurately intercept the target. Numerical simulations with some comparisons are performed to demonstrate the superiority of the proposed guidance law.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.84-86
• /
• 2001

A new navigation method is developed and implemented for mobile robot. The mobile robot navigation problem has traditionally been decomposed into the path planning and path following. Unlike tracking-based system, which minimize intercept time and moved mobile robot distance for optimal rendezvous point selection. To research of random moving object uses algorithm of Adaptive Control using Auto-regressive Model. A fine motion tracking object's trajectory is predicted of Auto-regressive Algorithm. Thus, the mobile robot can travel faster than the target wi thin the robot's workspace. The can select optimal rendezvous point of various intercept time.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1593-1596
• /
• 2003

In this paper, we propose mechanism of system call control, monitor, and manage by user level, and for this purpose we propose the mechanism using system call intercept and a logging system. Proposed mechanism is more convenient in that there is no necessity for modification of linux source code, so general users can actively apply and modify. As an application model for the mechanism, we can explain for the Daemon Process Protection System which can have a complete control on system daemon processes.