• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3295-3305
• /
• 2011

Thermal behavior of poly (methyl methacrylate) was analyzed in the presence of tin (IV) chloride. Five different proportions - polymer to additive - were selected for casting films from common solvent. TG, DTG and DTA were employed to monitor thermal degradation of the systems. IR and py-GC-MS helped identify the decomposition products. The blends start degrading at a temperature lower than that of the neat polymer and higher than that of the pure additive. Complex formation between tin of additive and carbonyl oxygen (pendent groups of MMA units) was noticed in the films soon after the mixing of the components in the blends. The samples were also heated at three different temperatures to determine the composition of residues left after the expulsion of volatiles. The polymer, blends and additive exhibited a one step, two-step and three-step degradation, respectively. $T_0$ is highest for the polymer, lowest for the additive and is either $60^{\circ}C$ or $70^{\circ}C$ for the blends. The amount of residue increases down the series [moving from blend-1 (minimum additive concentration) to blend-5 (maximum additive concentration)]. For blend-1, it is 7% of the original mass whereas it is 16% for blend-5. $T_{max}$ also goes up as the concentration of additive in the blends is elevated. The complexation appears to be the cause of observed stabilization. Some new products of degradation were noted apart from those reported earlier. These included methanol, isobutyric acid, acid chloride, etc. Molecular-level mixing of the constituents and "positioning effect" of the additive may have brought about the formation of new compounds. Routes are proposed for the appearance of these substances. Horizontal burning tests were also conducted on polymer and blends and the results are discussed. Activation energies and reaction orders were calculated. Activation energy is highest for the polymer, i.e., 138.9 Kcal/mol while the range for blends is from 51 to 39 Kcal/mol. Stability zones are highlighted for the blends. The interaction between the blended parts seems to be chemical in nature.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.1
• /
• pp.19-28
• /
• 2006

The phase-shift method for determining the Langmuir, Frumkin, and Temkin adsorption isotherms ($\theta_H\;vs.\;E$) of H for the cathodic $H_2$ evolution reaction (HER) at a Pt/0.1 M KOH solution interface has been proposed and verified using cyclic voltammetric, differential pulse voltammetric, and electrochemical impedance techniques. At the Pt/0.1 M KOH solution interface, the Langmuir and Temkin adsorption isotherms ($\theta_H\;vs.\;E$), the equilibrium constants ($K_H=2.9X10^{-4}mol^{-1}$ for the Langmuir and $K_H=2.9X10^{-3}\exp(-4.6\theta_H)mol^{-1}$ for the Temkin adsorption isotherm), the interaction parameters (g=0 far the Langmuir and g=4.6 for the Temkin adsorption isotherm), the rate of change of the standard free energy of $\theta_H\;with\;\theta_H$ (r=11.4 kJ $mol^{-1}$ for g=4.6), and the standard free energies (${\Delta}G_{ads}^{\circ}=20.2kJ\;mol^{-1}$ for $k_H=2.9\times10^{-4}mol^{-1}$, i.e., the Langmuir adsorption isotherm, and $16.7<{\Delta}G_\theta^{\circ}<23.6kJ\;mol^{-1}$ for $K_H=2.9\times10^{-3}\exp(-4.6\theta_H)mol^{-1}$ and $0.2<\theta_H<0.8$, i.e., the Temkin adsorption isotherm) of H for the cathodic HER are determined using the phase-shift method. At intermediate values of $\theta_H$, i.e., $0.2<\theta_H<0.8$, the Temkin adsorption isotherm ($\theta_H\;vs.\;E$) corresponding to the Langmuir adsorption isotherm ($\theta_H\;vs.\;E$), and vice versa, is readily determined using the constant conversion factors. The phase-shift method and constant conversion factors are useful and effective for determining the Langmuir, Frumkin, and Temkin adsorption isotherms of intermediates for sequential reactions and related electrode kinetic and thermodynamic data at electrode catalyst interfaces.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.6
• /
• pp.151-160
• /
• 2017

Among the methods of developing tourist spots and culture as the experience contents, it is a common method to display high-quality video images on a large display, and it is necessary to make a special difference between the participant's active participation and the visual experience in other regions. In this paper, using the single molecular OLED and active type, the regional tourist spots blend transparent OLED dual-layer display systems with the extended image implementation and augmented interaction techniques to give the participants a real-world experience, such as directing to new experiences and beautiful sights. In this paper, additional images and UI layers are applied to the layers of the images to allow visitors to experience sightseeing information, weather, maps, accommodations, festivals and photo materials with image. In addition to the dual-layer system, it also added a multi-display system that additionally has one vertical 55-inch display on each side, adding to the experience the immersive experience and interface interlocking fun. By using transparent OLED, dual layer panel and 3-channel Multi-image playback technique, the augmented type experience contents which can experience the local attractions in Jeollanamdo province in Korea at all time without any limitation of time and space were developed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.4
• /
• pp.118-130
• /
• 2017

During the landscape design process, landscape architects produce various forms of drawings to visualize the future designed landscape. This work thoroughly examines the process of the utilization of James Corner's theory and practice of representation. Since the early 1990s, Corner has explored the characteristics and functions of landscape architectural drawing theoretically. Specifically, Corner argued that the use of visual representation makes it difficult to achieve the full embodiment of all of the multisensory characteristics of a landscape. Thus, he explored new drawing techniques that alternatively visualize the landscape and generate creative ideas(i.e., imagination of drawing), rather than a realistic illustration of not-yet-actualized landscapes(i.e., instrumentality of drawing). Corner's theory has evolved throughout the mid and late-1990s as applied to landscape practice. Corner embraced ecology and implemented the theory and practice of Landscape Urbanism, thereby once again emphasizing the instrumentality of drawing. Whereas the early theory mainly explored a perspective view using collage and montage, Corner later began to stress the importance of the instrumentality again. For example, Corner employed a mapping technique based on the instrumental map and that simultaneously creatively transforms it. Corner's theory and practice of representation fully explored the identity of landscape architectural drawings and reflected the interaction between theory and practice. Thus, his design and theoretical works continue to have significant influence on present landscape practice and theory.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.1
• /
• pp.26-33
• /
• 2009

The phase-shift method and correlation constants, i.e., the unique electrochemical impedance spectroscopy (EIS) techniques for studying the linear relationship between the behavior ($-{\varphi}$ vs. E) of the phase shift ($90^{\circ}{\geq}-{\varphi}{\geq}0^{\circ}$) for the optimum intermediate frequency and that ($\theta$ vs. E) of the fractional surface coverage ($0{\leq}{\theta}{\leq}1$), have been proposed and verified to determine the Langmuir, Frumkin, and Temkin adsorption isotherms of H and related electrode kinetic and thermodynamic parameters at noble metal (alloy)/aqueous solution interfaces. At a Zr/0.2 M ${H_2}{SO_4}$ aqueous solution interface, the Frumkin and Temkin adsorption isotherms ($\theta$ vs. E), equilibrium constants (K = $1.401{\times}10^{-17}\exp(-3.5{\theta})mol^{-1}$ for the Frumkin and K = $1.401{\times}10^{-16}\exp(8.1{\theta})mol^{-1}$ for the Temkin adsorption isotherm), interaction parameters (g = 3.5 for the Frumkin and g = 8.1 for the Temkin adsorption isotherm), rates of change of the standard free energy (r = $8.7\;kJ\;mol^{-1}$ for g = 3.5 and r = $20\;kJ\;mol^{-1}$ for g = 8.1) of H with $\theta$, and standard free energies ($96.13{\leq}{\Delta}G^0_{\theta}{\leq}104.8\;kJ\;mol^{-1}$ for K = $1.401{\times}10^{-17}\exp(-3.5{\theta})mol^{-1}$ and $0{\leq}{\theta}{\leq}1$ and ($94.44<{\Delta}G^0_{\theta}<106.5\;kJ\;mol^{-1}$ for K = $1.401{\times}10^{-16}\exp(-8.1{\theta})mol^{-1}$ and $0.2<{\theta}<0.8$) of H are determined using the phase-shift method and correlation constants. At 0.2 < $\theta$ < 0.8, the Temkin adsorption isotherm correlating with the Frumkin adsorption isotherm, and vice versa, is readily determined using the correlation constants. The phase-shift method and correlation constants are probably the most accurate, useful, and effective ways to determine the adsorption isotherms of H and related electrode kinetic and thermodynamic parameters at highly corrosion-resistant metal/aqueous solution interfaces.

• Journal of Korean Society of Forest Science
• /
• v.109 no.1
• /
• pp.31-40
• /
• 2020

This study aimed to investigate the effects of climate change on the survival and growth performance of Pinus densiflora and Larix kaempferi seedlings using open-field experimental warming and precipitation manipulation. We measured the survival rate, root-collar diameter, and height, and then calculated the seedling quality index (SQI) of 2-year-old seedlings under 6 treatments [2 temperatures (TC: Control; TW: Warming) × 3 precipitation manipulations (PC: Control; PD: Decreased; PI: Increased)] and performed a two-way ANOVA to test for differences.The air temperature of the warming plots was 3℃ higher than that of the control plots, while the precipitation manipulation plots received ±40% of the precipitation received by the control plots. Temperature and precipitation treatments did not significantly affect the survival rate of P. densiflora; however, the SQI of P. densiflora decreased with increasing precipitation. In contrast, the mortality rate of L. kaempferi increased with increasing temperature and decreasing precipitation. Furthermore, in L. kaempferi, TC × PI treatment resulted in the lowest SQI with a significant interaction effect observed between the two factors. In summary, low seedling production and quality should be expected in P. densiflora as precipitation increases and in L. kaempferi as temperature increases or precipitation decreases. These results indicate species-specific sensitivities to climate change of two plant species at the nursery stage. With the occurrence of global warming, the frequencies of drought and heavy rainfall events are increased, and this could affect the survival and seedling quality of tree species. Therefore, it is necessary to improve nursery techniques by establishing new adaptation strategies based on species-specific growth performance responses.

• Journal of The Korean Astronomical Society
• /
• v.47 no.6
• /
• pp.235-253
• /
• 2014

Intensity interferometry, based on the Hanbury Brown-Twiss effect, is a simple and inexpensive method for optical interferometry at microarcsecond angular resolutions; its use in astronomy was abandoned in the 1970s because of low sensitivity. Motivated by recent technical developments, we argue that the sensitivity of large modern intensity interferometers can be improved by factors up to approximately 25 000, corresponding to 11 photometric magnitudes, compared to the pioneering Narrabri Stellar Interferometer. This is made possible by (i) using avalanche photodiodes (APD) as light detectors, (ii) distributing the light received from the source over multiple independent spectral channels, and (iii) use of arrays composed of multiple large light collectors. Our approach permits the construction of large (with baselines ranging from few kilometers to intercontinental distances) optical interferometers at the cost of (very) long-baseline radio interferometers. Realistic intensity interferometer designs are able to achieve limiting R-band magnitudes as good as $m_R{\approx}14$, sufficient for spatially resolved observations of main-sequence O-type stars in the Magellanic Clouds. Multi-channel intensity interferometers can address a wide variety of science cases: (i) linear radii, effective temperatures, and luminosities of stars, via direct measurements of stellar angular sizes; (ii) mass-radius relationships of compact stellar remnants, via direct measurements of the angular sizes of white dwarfs; (iii) stellar rotation, via observations of rotation flattening and surface gravity darkening; (iv) stellar convection and the interaction of stellar photospheres and magnetic fields, via observations of dark and bright starspots; (v) the structure and evolution of multiple stars, via mapping of the companion stars and of accretion flows in interacting binaries; (vi) direct measurements of interstellar distances, derived from angular diameters of stars or via the interferometric Baade-Wesselink method; (vii) the physics of gas accretion onto supermassive black holes, via resolved observations of the central engines of luminous active galactic nuclei; and (viii) calibration of amplitude interferometers by providing a sample of calibrator stars.

• Journal of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.630-635
• /
• 1991

The crystal structure of a bromine sorption complex of dehydrated fully $Ca^{2+}$-exchanged zeolite A (a = 12.211(2) ${\AA}$) has been determined by single-crystal X-ray diffraction techniques in the cubic space group, Pm3m at $21(1)^{\circ}C$. The crystal was prepared by dehydration at $360^{\circ}C$ and 2 ${\times}$ $10^{-6}$ Torr for 2 days, followed by exposure to about 180 Torr of bromine vapor at $24^{\circ}C$ for 30 min. In the resulting structure, six $Ca^{2+}$ ions are located on two different threefold axes associated with 6-ring oxygens. A total of six dibromine molecules are sorbed per unit cell. Each $Br_2$ molecule approaches a framework oxide ion axially, with O-Br = 3.12(7) ${\AA}$, Br-Br = 2.64(9) ${\AA}$ and O-Br-Br = $178(2)^{\circ}$, indicating a charge-transfer interaction. Full-matrix least-squares refinement converged to a conventional R index of 0.104 using the 103 independent reflections for which I > 3${\sigma}$ (I).

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.2
• /
• pp.127-134
• /
• 2005

Although the bulk composition of materials is one of the major considerations in extractive metallurgy and environmental science, surface composition and topography control surface reactivity, and consequently play a major role in determining metallurgical phenomena and pollution by heavy metals and organics. An understanding of interaction mechanisms of different chemical species at the mineral surface in an aqueous media is very important in natural environment and metallurgical processing. X-ray photoelectron spectroscopy (XPS) has been used as an ex-situ analytical technique, but the material to be analyzed can be any size from $100\;{\mu}m$ up to about 1 cm. It can also measure mixed solids powders, but it is impossible to ascertain the original source of resulting x-ray signals where they were emitted from, since it radiates and scans the macro sample surface area. The study demonstrated the ability of TOF-SIMS to detect individual organic species on the surfaces of mineral particles from plant samples and showed that the TOF-SIMS techniques provides an excellent tool for establishing the surface compositions of mineral grains and relative concentrations of chemicals on mineral species.

• Journal of Internet Computing and Services
• /
• v.15 no.4
• /
• pp.81-89
• /
• 2014

Owing to recent advanced techniques in information and communication technology(ICT), our daily life has been changing very quickly and our life style has also been affected greatly. In the current knowledge and information society, the disabled can have a right to enjoy benefits of advanced ICT technologies. However, there is a barrier called digital divide so that the disabled have some difficulties to communicate to the world with ICT technologies. In this sense, our job is to close digital divide and let the disabled enjoy benefits of ICT technologies. Recently there have been some research works to close digital divide between the disabled and the non-disabled. Among various attempts to close digital divide, improving web accessibility for the disabled is the biggest concern since web is a still representative tool among ICT tools. The purpose of this paper is to propose some practical guidelines for improving web accessibility for the disabled. The proposed improvement guidelines are developed based on the existing web accessibility guidelines and are upgraded for more adaptable to the disabled. Our principles are based on the following philosophy. First, any input transmission must be more confirmed. Second, prevent any instant request. Third, allow the disabled to record or store the contents if necessary. Fourth, reduce physical movement for the disabled. Fifth, provide more interaction tools for the disabled.