• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.92-102
• /
• 2018

The purpose of this study is to investigate if subjective well-being could be improved by visiting urban forests near residential areas. Because visiting an urban forest is not an intense positive experience, this research is focused on frequency of affective experience rather than intensity. The independent variables are number of visits and length of stay. The dependent variables are positive affect, negative affect, and life satisfaction. A polling agency was employed to select 600 respondents by quota sampling, and data was collected by online survey. The results of ANOVA showed that there was no interaction between the number of visits and length of stay. Regardless of the number of visits, the subjective well-being of visitors of urban forests was enhanced: (a) positive affect of respondents who had visited in the past 2 weeks was increased while negative affect was decreased, and (b) life satisfaction for those who had visited at least 1 time per month was enhanced among usual visitors. The stay of length, however, had little effect on the increase or decrease of these three variables. The results of this study support the existing theory that one could reset their genetically determined happiness set point to a higher level by participating in intentional activities such as visiting urban forests that offer ways to achieve long-lasting changes in well-being. This means that it would be a valuable government investment to construct and maintain urban forests for improving citizens' welfare. A few comments were suggested regarding data collection and inclusion of influencing variables to make future subjective well-being studies more reliable.

• The Journal of Korean Society for Radiation Therapy
• /
• v.8 no.1
• /
• pp.41-54
• /
• 1996

The secondary electrons developed by interaction between primary beam and a tray mounted for blocks in Megavoltage irradiation result in excess soft radiation dose to the surface layer. To reduce this electron contamination, electron filters have been used to be attached under a tray. Various filters with Cu and Al plates in six different thickness and Cu/Al combined plates in 3 different thickness were tested to measure the reduction rate of secondary electron contamination to the surface layer. The measurement to find optimal filter was performed on 6MV linear accelerator in $10 cm{\times}10 cm$ field size and fixed 78.5cm source to measurement points distance from surface to maximum build up point in 2mm intervals. The result was analyzed as the ratio of measured doses with using filters, to standard doses of measured open beam. The result of this study was fellowing : 1. The contaminated low energy radiation were mainly produced by blocking tray. 2. The surface absorbed dose was slowly increased by increasing irradiation field size but rapidly increased at field size above $15cm{\times}15cm$. 3. Al plate upto 2.5mm thickness used as a filter was found to be inadequate due to the failure of reduction of the surface absorbed dose below doses of the under surface upto the maximal build up. Cu 0.5mm plate and Cu 0.28mm/A1 1.5mm compound plate were found to be optimal filters. 4. By using these 2 filters, the absorbed dose to the surface were effectively reduced $5.5\%$ in field size $4cm{\times}4cm,\;11.3\%$ in field size $10cm{\times}10cm,\;22.3\%$ in field size $25cm{\times}25cm$. 5. In field size $10cm{\times}10cm$, the absorbed dose to the surface of irradiation was reduced by setting TSD 20cm at least,. but effective and enough dose reduction could be achieved by setting TSD 30cm as 2 optimal filters used. 6. More surface dose absorbed at TSD less than 7.4cm with a tray and filters together indicated that soft radiation was also developed by filters. 7. The variation of PDD by the different size of irradiation field was minimal as 2 optimal filters used. There was also not different in variation of PDD according to using any of two different filters. 8. PDD was not effected either by various TSD or by using the different filter among two.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.8
• /
• pp.4068-4076
• /
• 2013

The wheel-rail interaction forces are influenced by the velocity of vehicle, wheel load, alignment (curve radius, cant etc). For the safety of track structure, it is required to evaluate the influences for track and influential factors. Recently, the HEMU 430-X, which was developed by Next Generation High-Speed Rail Development R&D Project, achieved 421.4km/h in a test run of Daegu.Busan section of the Gyeongbu high speed rail on March in 2013. In the case of additional speed-up test on Test-Bed Section(Gongju.Jeongeup: KP 100~128km Osong starting point), the analysis of track forces is required for outer rail by the increase of dynamic force and centrifugal force of vehicle. In this paper, the vehicle speed variation on HSL line is evaluated by TPS analysis considering the tractive effort of HEMU 430-X, tested running resistance and alignment of Honam HSR. And the track forces are evaluated by centrifugal force and impact factor on curved track.

• The Journal of the Korea Contents Association
• /
• v.18 no.10
• /
• pp.217-228
• /
• 2018

The purpose of this study is to observe the awareness and needs of original inhabitants on urban to rural migration and propose public projects with a consideration of their stance based on the results. To comprehend their awareness and needs on urban to rural migration through their experience related to it, focus group interview was done and three categories were identified as a result, which are 'relative deprivation', 'limitations and difficulties of urban to rural migration', and 'plans for successful settlement'. First, the original inhabitants were discontent towards the government policies related to urban to rural migration and migrant's behaviors seemed to form negative perception on it. Second, financial difficulty and trouble in stable crop cultivation and acquirement of farming techniques were identified as limitations and difficulties of urban to rural migration. Third, the original inhabitants recognized the need of direct communication between original inhabitants and migrants and activation of meetings for exchange of information to positive relationship between the two groups and migrants should have proper attitude and effort to learn the rural culture for interaction and cooperation. Fourth, there's in need for an institution, which serves as a focal point that provides information and support urban to rural migration. Fifth, successful plans for settlements of migrants thought by the original inhabitants were found. Sixth, there's a need for the original inhabitants to play the role of a mentor to the migrants for their settlement and to promote positive relationship between them.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.4
• /
• pp.1-10
• /
• 2010

This present paper's goal is to show a virtual human agent's movement-data loci based on realistically limited perception data is human-like. To determine human-likeness of the movement-data loci, we consider interactions between two parameters: Realistically Limited Perception (RLP) data and Incremental Movement-Path data Generation (IMPG). That is to consider how the former (i.e., RLP), one of the simulated parameters of human thought or its elements dictates the latter (i.e., IMPG), one of the simulated parameters of human movement behavior. Mapping DB is a prerequisite for navigation in an agent system because it functions as an interface between perception and movement behavior. Although Hill et al. studied mapping DB methodology based on RLP, their research dealt only with a rendering camera's view point data. The agent system in this present paper was integrated with the Hill's mapping DB module and then the two parameters' interaction was considered on a military reconnaissance mission with unexpected enemy emergence. Movement loci that were generated by the agent and subjects were compared with each other. The agent system in this present research verifies that it can be a functional test bed for producing human-like movement-data loci although the human-likeness of agent is the result of a pilot test, determined by two parameters (RLP and IMPG) and only 30 subjects.

• Management & Information Systems Review
• /
• v.36 no.4
• /
• pp.187-209
• /
• 2017

Service industry performance and competitive advantage depend on the attitudes and behavior of customer service employees who produce and deliver services through contact with customers. Most studies on customer service employees so far have concentrated on kindness, attitudes, or benefits. This study focuses on the increasing importance of customer service employees and intends to study them from the viewpoint of human brands that recognize customer service employees as a brand. In addition to the role of the employee at the service contact point, the customer participation behavior affects the interaction process with the customer service employee. Ultimately, customers could no longer be excluded from control to improve service quality. This study based on theory that the human brand characteristics of the customer service employees lead the customer's participation, which has a positive effect on the relationship with the service brand and the service brand attitude surveyed and analyzed customers who use service brand. This study is summarized as follows. First, the relationship between the service brand and the customer is examined. Second, this study also expands prior studies by examining the human brand characteristics of customer service employees and customers' willingness to participate in providing information on the impact of the consumer-brand relationship. The results of the study indicate that among the customer service employees' human brand characteristics reliability, familiarity, and empathy were found to affect the relationship between customers, the service brand, and the attitude toward the service brand the most. This study provides important implications for theoretical and practical strategies by examining the qualities and characteristics of customer service employees, which are the most important agents of marketing.

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.293-299
• /
• 2015

MOOC (Massive Open Online Course) is an online course aimed at limited participation and open access via the web. There is even the prospect that MOOC may break down the existing university system and open a new horizon of education. However, MOOC is going differently from the first prospect that it would threat the existing higher education institutions. So this study wishes to provide a starting point of discussion that we can produce and utilize MOOC to fit our situation of higher education by revealing the inherent problems of MOOC. MOOC is a basically online education, so that it cannot help inheriting the essential weakness of the existing one: the interaction, supervision and evaluation. The newly added concept 'massive' raises the problem of class size which is the most sensitive part in the field of education. The concept 'open' reverses a customized education because MOOC is a kind of video clips of a lecture for unspecific massive learners. As a conclusion, we predicts that MOOC will be positioned as a higher education service for very prominent learners in self-led learning ability and people who cannot access even traditional online higher education institutions. Also MOOC is highly likely to be used as a means of Flipped Learning in universities. Therefore, considering these points in the future, we need to develop MOOC to suit these targets.

• Journal of Korean Academy of Nursing
• /
• v.18 no.1
• /
• pp.5-18
• /
• 1988

Herzberg and his associates concluded from their findings that job satisfaction consisted on two independent dimension ; the first dimension was related to job satisfaction, the second to job dissatisfaction. According to the Herzberg theory, the satisfiers are related to the nature of the work itself and the rewards that flow directly from the performance of that work. The dissatisfaction factors are associated with the individual's relation to the context or environment in which he works. The purpose of this study was to investigate selected factors which result in job satisfaction / dissatisfaction of nurses employed in general hospital. In a study of this nature, it is important that the population be as homogenous as possible in order to reduce the effects of the different environments and backgrounds on job satisfaction. A job satisfaction questionnaire developed by Slabitt et als. was used for this study. It contains 45 statements and utilizes a Likert type scale of 5. Participants were asked to select response which were congruent with their perceptions of the item. It was decided to conduct the study in one general hospital in Seoul. A sample of 505 clinical nurses were selected to participate in this study. The results of this study were as follows ; 1. The overall mean score for the 45 five-point scales of job satisfaction items was 2.945, showing that the subjects of this study were neither satisfied nor dissatisfied. 2. To identify the specific job related factors that result in Job satisfaction / dissatisfaction, the 45 items of job satisfaction were divided into 6 areas and the mean scores and % of agreement were compared. The specific job related factor that resulted in job satisfaction was the job status and those that resulted in job dissatisfaction were salaries, task requirements and organization requirements. But the areas of autonomy and interaction did not belong to either side of the specific job related factors. 3. To identify the relationship between the job satisfaction and the subject's general characteristic, data was analyzed using the t-test and the Pearson correlation coefficient. It was found that the relationship between the job satisfaction and the request for rotation and intention to remain on the job were statistically significant at .05 level, but the relationship between the job satisfaction and age, work experience, and educational background were nor statistically significant at the .05 level.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.2
• /
• pp.135-146
• /
• 2020

To define an interface in a conventional level-set method, an analytical function must be revealed for an interfacial geometry. However, it is not always possible to define a functional form of level sets when interfaces become complex in a Cartesian coordinate system. To overcome this difficulty, we have developed a new level-set formalism that discriminates the interior from the exterior of a CAD modeled interface by parameterizing the stereolithography (STL) file format. The work outlined here confirms the accuracy and scalability of the hydrodynamic reactive solver that utilizes the new level set concept through a series of tests. In particular, the complex interaction between shock and geometrical confinements towards deflagration-to-detonation transition is numerically investigated. Also, a process of flame spreading and damages caused by point source detonation in a real-sized plant facility have been simulated to confirm the validity of the new method built for reactive hydrodynamic simulation in any complex three-dimensional geometries.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1B
• /
• pp.29-36
• /
• 2011

Evapotranspiration (ET) from the various surfaces needs to be understood because it is a crucial hydrological factor to grasp interaction between the land surface and the atmosphere. A traditional way of estimating it, which is calculating it empirically using lysimeter and pan evaporation observations, has a limitation that the measurements represent only point values. However, these measurements cannot describe ET because it is easily affected by outer circumstances. Thus, remote sensing technology was applied to estimate spatial distribution of ET. In this study, we estimated major components of energy balance method (i.e. net radiation flux, soil heat flux, sensible heat flux, and latent heat flux) and ET as a map using Mapping Evapo-Transpiration with Internalized Calibration (METRIC) satellite-based image processing model. This model was run using Landsat imagery of Gyeongan watershed in Korea on Feb 1, 2003 and Sep 13, 2006. Basic statistical analyses were also conducted. The estimated mean daily ETs had respectively 22% and 11% of errors with pan evaporation data acquired from the Suwon Weather Station. This result represented similar distribution compared with previous studies and confirmed that the METRIC algorithm had high reliability in the watershed. In addition, ET distribution of each land use type was separately examined. As a result, it was identified that vegetation density had dominant impacts on distribution of ET. Seasonally, ET in a growing season represented significantly higher than in a dormant season due to more active transpiration. The ET maps will be useful to analyze how ET behaves along with the circumstantial conditions; land cover classification, vegetation density, elevation, topography.