• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.385-397
• /
• 2015

Harmful and potentially harmful constituents (HPHCs) are chemical compounds in tobacco smoke that cause harm to smokers and non-smokers. This study established and validated methods for the analysis of HPHCs from mainstream cigarette smoke. The analyzed HPHCs were categorized into seven groups: aromatic amines, volatile organic compounds (VOCs), heavy metals, tobacco specific nitrosamines (TSNAs), benzo[a]pyrene (B[a]P), ammonia, and carbonyl compounds. The methods were validated by specificity, linearity, limit of detection (LOD), accuracy, precision, and recovery. These validated methods were then applied to the reference cigarettes (1R5F, 3R4F). The correlation coefficients (r²) for the calibration curves of the seven groups were over 0.995. The LODs showed values of 0.01-0.04 ng/cig cig for aromatic amines, 0.01-0.16 μg/cig for VOCs, 0.01-1.27 ng/cig for heavy metals, 0.06-0.28 ng/cig for TSNAs, 0.04 ng/cig for benzo[a]pyrene, 0.08 μg/cig for ammonia, and 0.78-1.77 μg/cig for carbonyl compounds. The precisions obtained from the intra and inter-day batches were less than 15%. The accuracy and the recovery range were less than 15% and 79.2-117.5%, respectively. The proposed methods can therefore be applied for determining HPHCs in tobacco mainstream smoke.

• Journal of Oral Medicine and Pain
• /
• v.30 no.3
• /
• pp.337-344
• /
• 2005

A tactile sensor employs a piezoelectric element to detect contact frequency shifts and thereby measure the stiffness or softness of material such as tissue, which allows the sensor to be used in many fields of research for urology, cardiology, gynecology, sports medicine and caner detection and especially for cosmetics and skin care. In this study, reliability of the tactile sensor system was investigated with its manual application to the muscles susceptible to temporomandibular disorders. Stiffness and elasticity of anterior temporalis, masseter and trapezius muscles were calibrated bilaterally from 5 healthy men with an average of 24.5$\pm$0.94 years. The tactile sensor used in this study had a computer-controlled and motor-driven sensor unit which automatically pressed down on the skin surface over the muscles being measured and retracted, thereby providing the hysteresis curve. The slope of the tangent of the hysteresis curve (${\Delta}f/{\Delta}x$) is defined as stiffness of the muscle being measured and the distance between the two parts of the curve as its elasticity. To determine inter-examiner reliability, all the measurements were performed by the two examiners A and B, respectively and the same examination were repeated with an interval of 2 days for intra-examiner reliability. The results from this study demonstrated high reliability in measuring stiffness and elasticity of anterior temporalis, masseter and upper trapezius muscles using a tactile sensor system. It is suggested that the tactile sensor system can be a highly reproducible and effective instrument for quantitative evaluation of the muscle in head and neck region.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.71-78
• /
• 2012

Illite-smectite mixed layers (I-S) occurring authigenically in diagenetic and hydrothermal environments reacts toward more illite-rich phases as temperature and potassium ion concentration increase. For that reason, I-S is often used as geothermometry and/or geochronometry at the field of hydrocarbons or ore minerals exploration. Generally, I-S shows X-ray powder diffraction (XRD) patterns of ultra-thin lamellar structures, which consist of restricted numbers of sillicate layers (normally, 5 ~ 15 layers) stacked in parallel to a-b planes. This ultra-thinness is known to decrease I-S expandability (%S) rather than theoretically expected one (short-stacking effect). We attempt here to quantify the short stacking effect of I-S using the difference of two types of expandability: one type is a maximum expandability ($%S_{Max}$) of infinite stacks of fundamental particles (physically inseparable smallest units), and the other type is an expandability of finite particle stacks normally measured using X-ray powder diffraction (XRD) ($%S_{XRD}$). Eleven I-S samples from the Geumseongsan volcanic complex, Uiseong, Gyeongbuk, have been analyzed for measuring $%S_{XRD}$ and average coherent scattering thickness (CST) after size separation under 1 ${\mu}m$. Average fundamental particle thickness ($N_f$) and $%S_{Max}$ have been determined from $%S_{XRD}$ and CST using inter-parameter relationships of I-S layer structures. The discrepancy between $%S_{Max}$ and $%S_{XRD}$ (${\Delta}%S$) suggests that the maximum short-stacking effect happens approximately at 20 $%S_{XRD}$, of which point represents I-S layer structures consisting of ca. average 3-layered fundamental particles ($N_f{\approx}3$). As a result of inferring the $%S_{XRD}$ range of each Reichweite using the $%S_{XRD}$ vs. $N_f$ diagram of Kang et al. (2002), we can confirms that the fundamental particle thickness is a determinant factor for I-S Reichweite, and also that the short-stacking effect shifts the $%S_{XRD}$ range of each Reichweite toward smaller $%S_{XRD}$ values than those that can be theoretically prospected using junction probability.

• Journal of Bio-Environment Control
• /
• v.20 no.3
• /
• pp.182-188
• /
• 2011

This research was conducted to evaluate the effect of supplemental light-emitting diode (LED) light on growth characteristics and phytochemical content of pepper (Capsicum annuum L.) seedling using LED blue (470 nm, B), red (660 nm, R), blue + red (BR), far red (740 nm, FR) and UV-B (300 nm) light treatment, and without artificial light. Photon flux of LED light was 49, 16, 40, 5.0 and $0.82{\mu}mol\;m^{-2}s^{-1}$ for B, R, BR, FR, and UV-B light, respectively, during experiment. Supplemental LED light duration was $16hr\;day^{-1}$ and UV-B light duration was 10 min. per day after sunset up to 15 days (12 days after germination) of plants age. In our research, growth characteristics and phytochemical content of pepper seedlings were greatly influenced by supplemental LED light compare to control treatment. Red light increased the number of leaves, number of nodes, leaf width and plant fresh weight by 34%, 27%, 50% and 40%, respectively. Blue light increased the leaf length by 13%, and stem length and length of inter node were increased by 17% and 34%, respectively under grown far red light. After 15 days of light treatments phytochemical concentrations of pepper plants were significantly changed. Blue light enhanced the total anthocyanin and chlorophyll concentration by 6 times and 2 times, respectively. Red light increased the total phenolic compound at least two folds meanwhile far red light reduced the ascorbic acid and antioxidant activity 31% and 66%, respectively compared to control treatment.

• Journal of Food Hygiene and Safety
• /
• v.28 no.3
• /
• pp.247-251
• /
• 2013

The objective of present study was to develop a simultaneous determination method of 5 medical compounds, including beclomethasone, dexamethasone, prednisolone, ketoprofen, phenylbutazone in foods, using LC-MS/MS. To optimize MS analytical condition of 5 compounds, each parameter was established by MRM mode. The chromatographic separation was achieved on a C18 column successfully, with a mobile phase made up of A (0.1% formic acid) and B (0.1% formic acid in acetonitrile), at a flow rate of 0.3 mL/min for 17 min with a gradient elution. LOD and LOQ of 5 compounds were in the range of 0.40~4.60 ng/mL and 0.81~11.46 ng/mL, respectively. As a result of analyzing the three concentrations of the standard mixture added to blank samples, the results showed that the mean recovery rate of 5 compounds was in the range of 81.52~103.83%, and RSD (%) of Intra- and Inter-day assay were 0.52-10.45. Since relatively fine selectivity, accuracy and reproducibility were shown in this qualified experimental method, it could be utilized efficiently to investigating those 5 compounds to see if it is added to food products illegally.

• The Journal of the Korean Society for Microbiology
• /
• v.7 no.1
• /
• pp.29-41
• /
• 1972

To grow Myocbacterium leprae in cultured mouse peritoneal macrophages, studies were made with trypsin-purified Myco. laprae on 1) the dynamics of infection of mouse peritonal macrophages in vivo with Myco. leprae by intraperitoneal inoculation, 2) growth experiment of Myco. leprae in cultured mouse peritoneal macrophages by in vivo infection and in vitro cultivation and 3) the observation of pathological changes in spleens of mice induced by intraperitoneal inoculation of Myco. leprae. Results are summarized as follows; 1. Continuing and significant decreases were observed in the numbers of both acid-fast bacilli in cultured macrophage and of macrophages harboring.acid-fast bacilli by the length of inter vats between the time of intraperitoneal inoculation of Myco. leprae and the time of initiation of macrophage culture. 2. No evidence of multiplication of Myco. leprae in the peritoneal macrophages in vivo was found up to 5 months after intraperitoneal inoculation. 3. With cultures of macrophages made 24 hours and 1 week after intraperitoneal inoculation of Myco. leprae and maintained in vitro up to 2 to 3 months, microscopic examination of the stained preparations of cultured macrophages indicated that an apparent increase in the number of acid-fast bacilli in the macrophages did occur. 4. Quantitative experiment with in vivo infected-in vitro cultured macrophages revealed certain features of increase in the number of total acid-fast bacilli in the cultured macrophages 7 and 9 weeks after initiation of the cultures. 5. Pathological changes in the spleens mice inoculated with Myco. leprae were of mainly degenerative nature in the red pulp. No multiplication of Myco. leprae was observed in the spleens of mice up to 5 months after intraperitoneal inoculation.

• Land and Housing Review
• /
• v.6 no.2
• /
• pp.67-77
• /
• 2015

Now that it is the current situation that the smooth supply and demand are necessary for 2nd phase of beginning construction and stable development of Gaesung Industrial Complex, this study was willing to offer the planning criteria and model to establish the lodging for the workers in Gaesung Industrial Complex based on the agreement that both South and North Korea agreed in 2007. Regarding the plan, its standard and the alternative were reviewed considering welfare of workers, economic efficiency, technical validity, possibility of agreement and long-term development. The exclusive area per capita was calculated through Labor Standards Act of Korea and status survey of lodging for the workers provided to border line area between China and North Korea and the economic alternative based on one room for 6 persons with the public restroom was compared with that of development type based on one room for 4 persons with indoor restroom. Especially regarding the proposed site, the area with the optimized position was set by considering gradient, accessibility and convenience of development out of the area of Dongchang-ri where was agreed already and the priority of the proposed site that can keep the existing building site and provide was offered. The necessary period for whole construction was set as approximately 36 months. Regarding construction method, RC Rahmen method was selected as the optimized alternative considering the workmanship of manpower of North Korea and conditions of supply and demand of materials and cluster-type vehicle allocation plan based on 4~6 units considering the efficiency of supplying service facilities and convenient facilities along the simultaneous accommodation of 15,000 people was offered. It was analyzed that total business expenses of approximately 80~100 billion Korean Won would required though there were the difference for each alternative in the charged rental way that the development business owner develops by lending the inter-Korea Cooperation Fund and withdraws the rent by the benefit principle. The possibility of withdrawing the rent was analyzed assuming that the period of withdrawing the investment is 30 years. Especially for the operation management after moving, the establishment of the committee of operating the lodging for the workers of Gaesung Industrial Complex (tentative name) was offered with the dualized governance that the constructor takes charge of operational management, collecting fees and management of infrastructure and human resource management is delegated to North Korea.

• Journal of Korean Home Economics Education Association
• /
• v.23 no.3
• /
• pp.69-90
• /
• 2011

To develop the descriptive evaluation questionnaire with high validity and reliability on the Clothing and Textiles section of the middle school Technology & Hone Economics textbook, apply it to students and analyze its results. We made out a draft for descriptive evaluation questionnaire that was based upon the concrete establishment of the goal and the range of evaluation. We also made a rubric for scoring as well as sample answer-sheets. Finally, we completed a total of twenty three descriptive evaluation questions and we applied it to sixty five 2nd-grade students in two classes in a middle school. Descriptive evaluation questionnaire exhibited the relative high validity on each question. Moreover, three graders gave the same score on each question of descriptive evaluation, suggesting that descriptive evaluation questionnaire has the high inter-grader reliability and the strong correlation. But, low academic achievement was generally observed in the subjects. They had difficulty in describing their knowledge via their own language and drawing up accurate and detailed answers. They recognized the positive aspects of descriptive evaluation questionnaire, but they felt it uncomfortable due to study-burden and description itself. To overcome these limitations, it is required that students should experience various materials related to subject contents in classes as well as textbooks, concentrate themselves on finding solutions for problems, expand their scope, and practice describe them in advance. Therefore, the additional training for description evaluation questionnaire will be necessary for the more efficient and discriminative questionnaire. Also the questionnaire with high validity and reliability should be developed and the aggressive and voluntary participation of teachers will be needed.

• Journal of Sericultural and Entomological Science
• /
• v.7
• /
• pp.1-26
• /
• 1967

In order to develop the standards for the measurement of drought resistance in mulberry trees (Morus genus) the varietal differences of drought resistance were measured for 30 mulberry varieties, and the relationships between the drought resistance and the histological and physiological characteristics of mulberry leaves were investigated. The results were summarized as follows; 1. It is reasonable to use the drought resistance ratio, expressed by D/D'＊100, for the standard of drought resistance measurement for mulberry tree as a perennial tree crop. Where: D stands for growth amount(shoot length) in the plot of dry treatment, at the end of treatment. D' stands for an expected value of D which is expressed by B＊C/A. Here, A is the growth amount of wet treatment plot at the beginning of treatment, B is the growth amount of dry treatment plot at the beginning of treatment, and C is the growth amount of wet treatment plot at the end of treatment. 2. The results obtained from the application of above formula showed that the varieties Cadaneo, Tahozosaeng, Yongchunchuwu, Kaeryang suban. and Kabsun were highly resistant to drought and the varieties Jukmok, Shipyung, Sobun, Kaeryangzosaeng shipmoonza and Chungagokyo were highly susceptible. 3. Among leaf tissues. the rate of inter-cellular space showed the highest relationship with drought resistance. The correlation coefficient calculated (r=0.4153) was highly significant. Other leaf tissues such as epidermis and palisade showed no significant correlations with drought resistance. 4. The size and density of stomata were correlated to drought resistance. That is: Correlation between drought resistance and size of stomata(length ${\times}$ width)......r= -0. 3253(signif. at 5%) density(No. of stomata/l$\textrm{mm}^2$......r= +0.5047(signif. at 1%)

• Journal of Food Hygiene and Safety
• /
• v.20 no.4
• /
• pp.277-283
• /
• 2005

A plasticizer is a substance which is added to a material to improve its processability, flexibility and stratchability. Phthalates and adipates are the most frequently used plasticizers of poly(vinyl chloride) (PVC). However, they can migtate into food from PVC food packaging, and some of them are especially suspected as endocrine disruptors. In this study, Simultaneous analysis of 13 phthalates and 9 adipates were carried out by dual-column gas chromatography system equipped wi two FID detectors for rapid confirmation and quantification. The Proposed method was validated with > 0.993 of linearity in the ranges of 10-500 mg/l, < $3.5\%$ RSD of reproducability in 10 inter-days sample preparations, and > $98.1\%$ of recoveries for all the plasticizers. DEHA was detected in all the 3 PVC wraps at levels of 176.9-198.5mg/g. Among the 51 samples of PVC gaskets, the targeted plasticizers were detected in 41 samples. Of these plasticizer detected samples,40 contained DIDP at the levels of 157.3-374.7 mg/g and one contained DMP at the levels of 165.6 mg/g. Also, some plasticizers were detected in other packaging materials such as PET, PP, PE, Pulp. But it might be attributed to contamination in manufacturing.