• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.181-182
• /
• 2011

Phase-change materials can be cycled by exposure to laser beam, and as a function of the pulse intensity and duration, the laser beam triggers the switching from crystalline to amorphous phase and back. In other to progress better crystallization transition and amorphization long phase-transformation data of phase-change memory (PRAM), we investigated about the effect of Sb doping and Ag ions percolating into Ge-Se-Te phase-change material. Doped Sb concentrations was determined each of 10, 20 and 30 wt%. As the Sb-doping concentration was increased, the resistivity decreased and the crystallization temperature increased. Ionization of Ag was progressed by DPSS laser (532 nm) for 1 hour. The resistivity was more decreased and the crystallization temperature was more increased in case of adding Ag layer under Sb-(Ge-Se-Te) thin film. At the every condition of thin films included Ag layer more stable states were indicated compare with just Sb-doped Ge-Se-Te thin films.

• 한국분말재료학회지
• /
• 제6권2호
• /
• pp.171-177
• /
• 1999

Ti-45.2at.%Ni-5at.%Cu and Ti-40.2at.%Ni-10atat.%Cu alloy powders were fabricated by gas atomization process. The microstructures, Shape, hardness and phase transformation behaviors of the powders were investigated by means of optical microscopy, scanning electron microscopy, micro-hardness measurement, x-ray diffraction analyses and differential scanning calorimetry. The hardness of the Ti-Ni-XCu alloy powders decreased as Cu-content increased. The x-ray diffraction analyses were carried out for powders without heat treatment, and those that treated at 85$0^{\circ}C$ for an hour in a vaccum state($10^5$ torr) and then quenched into ice water. The intensity of B$19^t$ phase increased with heat treating. The monoclinic B$19^t$ martensite was formed in the Ti-Ni-XCu alloy powders during cooling.

• International Journal of Automotive Technology
• /
• 제2권1호
• /
• pp.33-38
• /
• 2001

The noise generated from a treadband mechanism of a tire has been the subject of this research. In particular, the treadband has been treated as an infinite tensioned beam resting on an elastic foundation which includes damping. The main objective is here to predict the sound power generated from a system mentioned above by locating harmonic point forces representing the excitation of treadband at the contact patch. It is possible to predict the sound power radiated from this structure by wavenumber transformation techniques. To find out the minimum radiated sound power, All parameters were varied. Thus this model can be used as a tire design guide for selecting parameters which produce the minimum noise radiation.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1111-1115
• /
• 2002

The photoluminescence of calixarene crystals has been studied as functions of temperature, time, and concentration. The vibronic bands shift to longer wavelength and become significantly sharper as temperature decreases. The experimental results r eveal that the structural transformation occur during the annealing process. Time-resolved spectra of calixarene at 12 K are monitored. Spectral features, which demonstrate characteristic of energy transfer processes, are not observed. The depopulation of excited state density is mainly controlled by unimolecular decay process dominating other decay processes. The lifetime was found to be 2.6 $\pm$ 0.1 ns. For the case of calixarene mixed with naphthalene, the fluorescence spectrum shows that the band centered at 340 nm lies 2840 $cm^{-1}$ below the relatively broad 310 nm band found for calixarene crystals. The spectra also exhibit that the emission intensity increases with increasing calixarene concentration. The results are evident that the calixarene emission is quenched by the naphthalene. Phosphorescence of calixarene mixed with naphthalene crystals is observed to determine whether the emission is due to naphthalene. The phosphorescence peaks were compared with the ground-state vibrational frequencies of naphthalene and found to be in good agreement. The results indicate that inter-molecular energy transfer occurs between calixarene and naphthalene.

• 한국세라믹학회지
• /
• 제30권12호
• /
• pp.1059-1065
• /
• 1993

The sliding wear behavior of the plasma sprayed zirconia containing 8wt% yttria was investigated over a range of room temperature to 800℃. Both of the friction coefficient and the wear loss increased reaching its maximum at about to 499℃. and then decreased again with increasing temperature up to 800℃. The worn surface at elevated temperature were observed and analyzed by scanning electron microscopy and X-ray diffractometer to study the mechanisms of high temperature wear behavior. Surface morphology of the worn samples changes with temperature. Monoclinic (m)/tetragonal (t) x-ray peak intensity ratio of wear debris and worn surface decreased with increasing temperature. Non-transformable tetragonal (t') to metastable tetragonal (t) phase transformation of worn surface increased with increasing temperature. The results indicate that dehumidification and above phase changes are contributing to the high temperature wear behavior of the plasma sprayed ZrO2-Y2O3 coatings.

• 한국세라믹학회지
• /
• 제56권3호
• /
• pp.291-297
• /
• 2019

Pyrolytic carbon (PyC) layers were deposited using methane. The PyC layer deposited with 5% methane showed highly textured graphite, while that deposited using 100% methane showed low textured graphite. The degrees of anisotropy of the carbon layers were measured using an X-ray diffractometer, a transmission electron microscope, and a Raman spectroscope, and the results were compared with those reported previously. The orientation angles obtained from the fast Fourier transformation of the high-resolution transmission electron microscopy images and the I_D/I_G intensity ratios obtained from the Raman spectra were used to evaluate the anisotropy of the PyC layers.

• 한국통신학회논문지
• /
• 제32권1C호
• /
• pp.16-22
• /
• 2007

본 논문에서는 선형계수확장 기반의 웨이블릿 워터마킹 기법을 제안하였다. 워터마크의 안정성을 위해 먼저 워터마크에 대해 Arnold 변환을 한 후, 선형계수확장을 적용하여 확대된 워터마크를 웨이블릿 변환 된 영상의 저주파대에 일정한 강도로 삽입하였으며 추출 시에는 기존 방법과 달리 F-노름(norm) 함수를 적용하였다. 실험결과 본 논문에서 제안한 방법은 충실도와 강인성 측면에서 우수한 특성을 가짐을 확인하였다.

• Journal of the Optical Society of Korea
• /
• 제4권1호
• /
• pp.30-36
• /
• 2000

In this paper, a method based on the Genetic Algorithm(GA) for phase optimization is proposed. The programmable hybrid optical interconnection system implemented by the spatial light modula-tor is tested for a near-real-time optical processing. Designed diffractive grating has a 74.7[%] high diffraction efficiency and a $1.73 {\times}10^{-1}$ uniformity quantitatively. The dependence of characteris-tics on several parameters in the grating design are analyzed. Also, as a result of the geometrical transformation to obtain quantitative data for $3 {\times} 3$ spot beams, an objective optical experiment using CCD array detector produces the mean of beam intensity as a gray level of 202, the maximum value is 225, the minimum value is 186, and uniformity is quantitatively $1.93 {\times} 10^{-1}$, similar to the simulation result.

• Bulletin of the Korean Chemical Society
• /
• 제14권1호
• /
• pp.38-42
• /
• 1993

Factor analysis was applied to study the thermal decomposition of barium titanyl oxalate (BTO) which is used as the precursor of barium titanate. BTO was synthesized in $H_2O$ solvent and calcined at various temperatures. The X-ray diffraction patterns were obtained to make the data matrix of peak intensity vs. 2${\theta}$. Abstract factor analysis and target transformation factor analysis were applied to this data matrix. It has been found that the synthesized BTO consists of the crystals of $BaC_2O_4{\cdot}0.5H_2O\;and\;BaC_2O_4{\cdot}2H_2O$ as well as the amorphous solid of TiO-oxalate. The results also indicate that the BTO was transformed via $BaCO_3\;to\;BaTiO_3\;and\;Ba_2TiO_4$ during the thermal decomposition.

• Journal of Contemporary Eastern Asia
• /
• 제20권2호
• /
• pp.174-196
• /
• 2021

Even though Sino-American relations of the Donald Trump era were perceived as predominately confrontational, with a symbolic trade war between the two, the scale of economic interdependencies between the United States and China results in either a need for collaboration or in serious losses on both sides in the case of lack of cooperation. The paper aims at analyzing economic relations between the United States of America and the People's Republic of China at the time of the Trump presidency. Analysis is based on the complex interdependence theory of Robert Keohane and Joseph Nye. The main hypothesis analyzed in the paper states: Asymmetric interdependence between the People's Republic of China and the United States of America limits the scope, intensity and length of a trade war. For the sake of the paper, economic interdependence will be analyzed. Apart from the reference to the state of the art, the document analysis and descriptive statistics are to be applied in the paper.