• 대한기계학회논문집
• /
• 제17권8호
• /
• pp.1875-1882
• /
• 1993

Variable thickness plates are commonly used as structural members in the majority of industrial sectors. Previous fracture mechanics researches on variable thickness plates were limited to mode I loading cases. In practice, however, cracks are usually located inclined to the loading direction. In this respect, combined mode(mode I/II) stress intensity factors $K_{I}$ and $K_{II}$ at the crack tip for a variable thickness plate were obtained by 3-dimensional finite element analysis. Variable thickness plates containing a slant edge crack were chosen. The parameters used in this study were dimensionless crack $length{\lambda}$, slant $angle{\alpha}$, thickness $ratio{\beta}$ and width ratio{\omega}$. Stress intensity factors were calculated by crack opening displacement(COD) and crack sliding displacement(CSD)method proposed by Ingraffea and Manu.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2308-2315
• /
• 1995

We studied the effects on the ignitability of mixture, the combustion duration, and the maximum combustion pressure, of various initial combustion factors such as temperature, pressure, and each equivalence ratio in order to identify the combustion characteristics of lean mixture and improve ignitability through the proper control of the ignition energy. It is concluded that there is an optimum turbulent intensity that enables the combustion to have the best ignitability and the shortest duration under each equivalent ratio, and the combustion duration is only dependent upon the distribution and magnitude of discharge energy within the limit of inflammability.

• 무역학회지
• /
• 제41권4호
• /
• pp.61-90
• /
• 2016

본 연구는 수출제조기업을 대상으로 기업의 생산성변화에 영향을 미치는 요인을 분석하는데 목적이 있다. 기존 실증연구에 기초하여 수출제조기업의 생산성변화에 영향을 미치는 변수를 선정하고, 이러한 변수들과 수출제조기업의 생산성변화간의 관계를 분석하였으며, 그 결과는 다음과 같다. 첫째, 수출제조기업 355개 대상으로 생산성변화에 영향을 미치는 요인을 분석한 결과에서 수출제조기업의 혁신활동과 총자산은 생산성변화에 긍정적인 영향을 미치는 반면, 인건비비율, 자기자본비율 및 유동비율은 생산성변화에 부의 영향을 미치는 것으로 나타났다. 둘째, 수출제조대기업에서 혁신활동과 무형자산은 생산성변화에 긍정적인 영향을 미치는 반면, 인건비비율, 판매비비율 및 자기자본비율은 생산성변화에 부의 영향을 미치는 것으로 나타났다. 셋째, 수출제조중소기업에서 혁신활동은 생산성변화에 긍정적인 영향을 미치는 반면, 인건비비율 및 자기자본비율은 생산성변화에 부의 영향을 미치는 것으로 나타났다. 넷째, KOSIP 상장 수출제조기업에서 무형자산은 생산성변화에 긍정적인 영향을 미치는 반면, 인건비비율, 판매비비율 및 유동비율은 생산성변화에 부의 영향을 미치는 것으로 나타났다. 다섯째, KOSDAQ 상장 수출제조기업에서 혁신활동 및 총자산은 생산성변화에 긍정적인 영향을 미치는 반면, 인건비비율 및 자기자본비율은 생산성변화에 부의 영향을 미치는 것으로 나타났다.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2287-2296
• /
• 2002

Most cracks in the structure occur under mixed mode loading and those fatigue crack propagation behavior heavily depends on the stress ratio. So, it is necessary to study the fatigue behavior under mixed mode loading as the stress ratio changes. In this paper, the fatigue crack propagation behavior was respectively investigated at stress ratio 0.1, 0.3, 0.5, 0.7 and we changed the loading application angle into 0$^{\circ}$, 30$^{\circ}$, 60$^{\circ}$ to apply various loading mode. The mode I and II stress intensity factor of CTS specimen used in this study was calculated by the displacement extrapolation method using FEM (ABAQUS). Using both the experiment and FEM analysis, we have concluded the relationship between crack propagation rate and stress intensity factor range at each loading mode due to the variation of stress ratio. Also, when the crack propagated under given stress ratio and loading mode condition, we have concluded the dominant factors of the crack propagation rate at each case.

• 오토저널
• /
• 제15권1호
• /
• pp.100-106
• /
• 1993

This paper aims to synthesize the research on fatigue fracture mechanisms of high strength aluminum alloys which are widely used in motorcars or airplanes to prevent accidents. To measure the data of crack opening ratio, the same materials and method are used for evaluating the fatigue crack propagation rate as an effective stress intensity factor. But, many researchers have brought different results. An exact crack opening ratio was, therefore, proposed for getting a more accurate fatigue crack propagation rate. The main conclusions obtained are as follows. (1) As a result of the fatigue test, the value of the crack opening ratio is the same regardless of the stress ratio. (2) The value of crack opening ratio is different according to the measuring point. After measuring the crack propagation rate by using an effective stress intensity factor, the crack opening ratio value measured at the crack mouth by a clip gage, or measured rear of the specimen by a strain gage is more accurate than that by any other measuring test.

• 한국전기전자재료학회논문지
• /
• 제34권1호
• /
• pp.8-15
• /
• 2021

Micro-LEDs can be applied to various parts of a product. However, it has disadvantages compared to general LEDs in large displays such as low efficiency, intensity, and contrast ratio, among others, owing to their short history of study. The simulations were carried out using ray-tracing software to investigate the change in light intensity and light distribution according to pattern shapes on the sapphire substrate of the flip-chip micro-LED (FC μ-LED) array. Three patterns-concave square patterns, convex square patterns, and Ag coated convex patterns-which existed on the opposite side of FC μ-LEDs (115 ㎛ × 115 ㎛) array, were applied. The intensity of FC μ-LEDs on the center of the receivers depends on the pattern depth with shape. The concave square patterns having FC μ-LEDs arrays show that decreasing intensity as the patterns depth. On the contrary, the convex square patterns having FC μ-LEDs arrays shows that increasing intensity as the patterns depth. In addition, the highest intensity shows that FC μ-LEDs having Ag-coated convex patterns on the opposite side of sapphire lead to a reduction in light crosstalk owing to the Ag film.

• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3282-3292
• /
• 1996

Flow velocity was measured using a hot wire anemometer. Turbulence intensity was in proportion to mean flow velocity regardless of swirl velocity. And integral length scale has proportional relation with swirl velocity regardless of measurement position. Flame speed calculated by radius of visualized flame was increased and then decreased according to lapse of time from spark. Maximum flame speed was increased according to increase of turbulence intensity. Burning speed and flame transport effect increased with increase of swirl velocity, but ratio of burning speed to flame speed decreased with increased of swirl velocity. Mass fraction burned versus volume fraction burned was increased in proportion to the increase of turbulence intensity, caused by increase of combustion promotion effect according to increase of turbulence intensity and scale.

• 대한기계학회논문집
• /
• 제4권2호
• /
• pp.47-53
• /
• 1980

Kikukawa-Compliance method using a conventional clip-on gauge was employed to investigate fatigue crack growth and crack closure in 2017-T3 aluminum alloy. The crack growth rate plot against stress intensity range .DELTA.K on a log-log diagram exhibits a bilinear form with a transition at the growth rate of 10$\^$-4/ mm/cycle. The bilinear form appears still in the plot of growth rate versus effective stress intensity range .DELTA.K$\_$eff/. Fatigue crack growth rate could be well represented by .DELTA.K$\_$eff. The experimental results indicate that the effective stress intensity range ratio U depends on the maximum stress intensity factor K$\_$max/, but the stress ratio R does not affect U. The crack opening stress intensity factor K$\_$op/ tends to increase with increasing K$\_$max/ and decrease with increasing .DELTA.K.

• 한국연소학회지
• /
• 제14권4호
• /
• pp.41-47
• /
• 2009

An experimental study was performed to confirm the effect of the changing combustor pressure(-30~30 kpa), combustion characteristics were investigated by measuring the local chemiluminescence intensity, the local temperature distribution and emission. In order to investigate combustion ones, the combustor pressure index($P^*$) was controlled in the range of 0.7~1.3 for each equivalence ratio in the present combustion system, where $P^*$ is defined as the ratio of absolute pressure to atmospheric one. The local mean temperature showed the uniform distributions for lower pressure index, which increased with increasing equivalence ratio. The mean $OH^*$ chemiluminescence intensity, showed high level for lower pressure index for ${\Phi}{\get}1.0$ conditions. EINOx decreased with decreasing pressure index for overall equivalence ratio conditions.

• 수산해양교육연구
• /
• 제28권4호
• /
• pp.1098-1106
• /
• 2016

To study the influence of light intensity on blind-side hypermelanosis of starry flounder, Platichthys stellatus, we compared growth, glucose, cortisol, ratio of malpigmented blind-side area, ambicolored fish ratio and expression of mch mRNA for 60 days in 0 lux(darkness) and 20 lux(low light density). The test was done in duplicate at 50 fish/tank with the selected ordinary juvenile flounder. The rearing was performed in FRP aquarium tanks ($H100cm{\times}L100cm{\times}W100cm$). Growth was higher in the 0 lux. The ratio of malpigmented blind-side area and ambicolored fish ratio were significantly higher at the 0 lux than at the 20 lux. The result suggests that 20 lux could inhibit the hypermelanosis. The expression level of MCH 1, 2 mRNA was significantly lower in 0 lux, indicating that MCH 1, 2 and light intensity are related to blind-side hypermelanosis of starry flounder.