Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

The Mixed Mode fatigue Crack Propagation Behavior with the Variation of Stress Ratio

응력비 변화에 따른 혼합모드 피로균열 전파거동

  • 송삼홍 (고려대학교 기계공학과) ;
  • 최지훈 (고려대학교 기계공학과) ;
  • 이정무 (고려대학교 기계공학과)
  • Published : 2002.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

Most cracks in the structure occur under mixed mode loading and those fatigue crack propagation behavior heavily depends on the stress ratio. So, it is necessary to study the fatigue behavior under mixed mode loading as the stress ratio changes. In this paper, the fatigue crack propagation behavior was respectively investigated at stress ratio 0.1, 0.3, 0.5, 0.7 and we changed the loading application angle into 0$^{\circ}$, 30$^{\circ}$, 60$^{\circ}$ to apply various loading mode. The mode I and II stress intensity factor of CTS specimen used in this study was calculated by the displacement extrapolation method using FEM (ABAQUS). Using both the experiment and FEM analysis, we have concluded the relationship between crack propagation rate and stress intensity factor range at each loading mode due to the variation of stress ratio. Also, when the crack propagated under given stress ratio and loading mode condition, we have concluded the dominant factors of the crack propagation rate at each case.

Keywords

References

  1. Qian, J. and Faterni, A., 1996, 'Mixed Mode Fatigue Crack Growth: A Literature Survey,' Eng Frac. Mech., Vol. 55, No.6, pp. 969 - 990 https://doi.org/10.1016/S0013-7944(96)00071-9
  2. Richard, H. A., 1983, 'A Loading Device for the Criterion of Mixed Mode in Fracture Mechanics,' Int. J. Fracture, Vol. 22, pp. R55 - R58 https://doi.org/10.1007/BF00942726
  3. Hallback, N. and Nilson, F., 1994, 'Mixed Mode I/II Fracture Behavior of an Aluminum Alloy,' J. Mech. Solids, Vol. 42, No.9, pp. 1345-1374 https://doi.org/10.1016/0022-5096(94)90001-9
  4. Hong, K. J. and Kang, K. J., 1996, 'Method to Measure $K_I,\;K_{II}$ and J-Integral for CTS Specimen under Mixed Mode Loading,' Transaction of the KSME A, Vol. 20, No. 11, pp. 3498 - 3506
  5. Erdogan, F. and Sih, G. C., 1963, 'On the Crack Extension in Plates Under Plane loading and Transverse Shear,' J. of Basic Engineering, Vol. 85, pp. 519-525 https://doi.org/10.1115/1.3656897
  6. Sih, G. C., 1974, 'Strain Energy Density Factor Applied to Mixed Mode Crack Problems,' Int. J. Fracture, Vol. 10, pp. 305 - 321 https://doi.org/10.1007/BF00035493
  7. Keisuke Tanaka, 1974, 'Fatigue Crack Propagation from a Crack Inclined to the Cyclic Tensile Axis,' Eng. Frac. Mech., Vol. 6, pp. 493 - 507 https://doi.org/10.1016/0013-7944(74)90007-1
  8. Richard, H. A., 1986, 'Some Theoretical and Experimental Aspects of Mixed Mode Fracture,' Advances Fracture Research, Vol. 5, pp. 3337-3344
  9. Qian, J. and Fatemi, A., 1996, 'Fatigue Crack Growth under Mixed Mode I and II Fatigue Loading,' Fatigue Fract. Engng. Mater. Struct., Vol. 19, No. 10, pp. 1277-1284 https://doi.org/10.1111/j.1460-2695.1996.tb00950.x
  10. Ong Jang-Woo, Jin Keun-Chan, Lee Sung-Geun and Kim Jong-Bae, 1989, 'Mixed-Mode Fatigue Crack Growth Behaviors in 5083-H115 Aluminum Alloy,' Transaction of the KSME A, Vol. 13, No. 3, pp. 461-471
  11. Song Sam-Hong and Lee Jeong-Moo, 2001, 'Fatigue Crack Propagation Behavior in STS304 under Mixed Mode Loading,' Transaction of the KSPE, Vol. 18, No.9, pp. 131-139
  12. Lal, D. N., 1996, 'A Detailed Physical Analysis of the R-Effect on LEFM Fatigue Crack Growth,' Eng. Frac. Mech., Vol. 55, No.1, pp. 115-132 https://doi.org/10.1016/0013-7944(95)00219-7
  13. Raghuvir Kumar and Kamlesh Singh, 1995, 'Influence of Stress Ratio on Fatigue Crack Growth in Mild Steel,' Eng. Frac. Mech., Vol. 50, No.3, pp. 377-384 https://doi.org/10.1016/0013-7944(95)91547-3
  14. ASTM E647, 'Standard Test Method for Measurement of Fatigue Crack Growth Rates,' Annual Book of ASTM Standards, Vol. 03.01, pp. 565 - 601
  15. ABAQUS User's Manual, 1998, Version 5.8, Habbitt, Karlsson and Sorensen, Inc., Pawtucket, RI
  16. Murakami, Y., 1987, Single edge cracked plate tension specimen(SECT), Stress Intensity Factors Hand Book, Pergamon Books, pp. 9-10