• 생물환경조절학회지
• /
• 제25권2호
• /
• pp.106-110
• /
• 2016

식물의 생육과 생산성을 예측하는 것은 매우 중요한 일이다. 본 연구는 common ice plant (Mesembryanthemum crystallinum L.)의 작물생장률, 상대생장률, 지상부 생체중과 건물중, 수확시기, 상품률과 상품수량과 같은 생육과 수확 요인들을 쉽게 읽을 수 있는 재식밀도-생육-수확(PGH) 도표를 만들기 위함이다. 광도 $140{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$과 일장 12시간 주기로, 3파장 형광등을 이용한 완전제어형 식물공장 시스템에서 박막수경 재배하였다. 4가지 재식밀도($15{\times}10cm$, $15{\times}15cm$, $15{\times}20cm$, and $15{\times}25cm$) 하에서 생육과 수량을 분석하였다. 재식밀도가 증가할수록 어느 한계까지는 식물체당 생체중과 건물중은 증가하는 경향이었으며, 단위면적당 생체중인 수량 또한 같은 경향을 보였다. 작물생장률, 상대생장률과 lost time은 2차 등식 형태를 보였으며, 지상부 생체중과 건물중은 직선적인 관계를 보였다. 이러한 등식을 이용하여 재식밀도-생육-수확(PGH) 도표를 만들었다. 예를 들면, $15{\times}20cm$ 재식밀도와 식물체당 생체 중 100g에서 수확할 경우, 재식주수, 작물생장률, 상대생장률, lost time, 식물체당 건물중, 수확시기와 수량은 각각 $33plants/m^2$, $20g{\cdot}m^{-2}{\cdot}d^{-1}$, $0.27g{\cdot}g^{-1}{\cdot}d^{-1}$, 22days, 2.5g/plant, 정식 후 26일과 $3.2kg{\cdot}m^{-2}$이었다. 이 도표를 가지고 적어도 2가지 요인 예를 들면, 재식밀도와 수확요인 중 하나만 알면, 작물생장률, 상대생장률, lost time과 같은 생육 요인과 지상부 생체중, 지상부 건물중, 수확시기와 수량과 같은 수확 요인들을 쉽게 구할 수 있다. 이러한 도표는 다양한 작물의 생육과 수량 요인을 예측할 수 있어 완전제어형 식물 생산 시스템 설계를 위해 유용한 도구가 될 것이다.

• 분석과학
• /
• 제25권3호
• /
• pp.171-177
• /
• 2012

Luminol-$H_2O_2$-Cu(II) 시스템을 이용한 화학발광법을 사용하여 방향족 아미노산인 트립토판, 타이로신 및 페닐알라닌의 정량분석을 하였다. 세 종류의 방향족 아미노산(트립토판, 타이로신, 페닐알라닌)을 luminol-$H_2O_2$-Cu(II) 시스템에 첨가하였을 때 아미노산이 존재하지 않을 때보다 화학발광세기가 더욱 증가하는 현상을 관찰하였으며, 이러한 현상을 이용하여 각 방향족 아미노산을 정량분석 하였다. 방향족 아미노산의 최적분석 조건을 조사하기 위하여, Cu(II) 이온 촉매에 의한 루미놀과 과산화수소의 화학발광반응에 미치는 아미노산의 반응속도론적 영향을 조사하였고 과산화수소와 Cu(II) 이온의 농도 그리고 pH와 완충용액의 영향을 조사하였다. 루미놀 화학발광 시스템의 최적 분석조건 하에서 수용액 중의 방향족 아미노산 정량분석을 위해 얻은 검정곡선에서 직선성이 성립하는 농도 범위는 각각 트립토판은 $1.0{\times}10^{-6}{\sim}2.0{\times}10^{-5}\;M$, 타이로신은 $1.0{\times}10^{-6}{\sim}2.0{\times}10^{-5}\;M$ 그리고 페닐알라닌은 $2.0{\times}10^{-6}{\sim}2.0{\times}10^{-5}\;M$이었으며, 이 구간에서 각 아미노산에 대한 상대표준편차(n = 4)는 순차적으로 3.21%, 2.64% 그리고 2.48%이었다. 그리고 각 아미노산의 검출한계($3{\sigma}/s$)는 트립토판 $6.8{\times}10^{-7}\;M$, 타이로신 $5.7{\times}10^{-7}\;M$, 페닐알라닌 $9.6{\times}10^{-7}\;M$이었다.

• 핵의학기술
• /
• 제15권1호
• /
• pp.10-16
• /
• 2011

추적 검사에서의 PET/CT 재구성 영상은 추적자의 분포를 균일하고 정확하게 표현하여야 일관된 정량분석 값을 제공 할 수 있을 것이다. 그러나 PET/CT 장비의 제한된 공간분해능 때문에 발생하는 부분 체적 효과(Partial Volume Effect: PVE)로 인해 관심영역의 방사능 농도가 실제의 값보다 낮게 측정될 가능성이 있고, 따라서 관심부위의 SUV가 실제 값보다 낮게 측정 될 가능성이 있다. 본 연구에서는 PET/CT 스캐너의 PVE를 보정하는 회복계수(Recovery Coefficient: RC)를 팬텀 실험을 통해 산출하고, 실제 PET/CT 검사 자료에 적용하여 보정 전과 후 SUV를 비교 분석 하고자 한다. ACR phantom을 이용하여 1000 mL의 증류수에 20.72 MBq (0.56 mCi)을 균일하게 희석하고 열소 원통 (hot cylinder-2.5, 1.6, 1.2, 0.8 cm in diameter)에 주입하였다. 또한 6440 ml의 증류수에 33.30 MBq (0.90 mCi), 22.20 MBq (0.60 mCi), 16.65 MBq (0.45mCi)을 균일하게 희석하고 배후 방사능을 채워 열소 원통과 배후방사능이 각각 4:1, 6:1, 8:1 (Hot/Background ratio: H/B ratio)이 되도록 만들어 3회 반복 실험하였다. 서울아산병원의 Biograph Truepoint 40 (SIEMENS, Germany) 장비로 whole body protocol을 사용하여 phantom 실험 및 환자 검사를 시행하였다. 2010년 7월부터 8월까지 서울아산병원에서 PET/CT 검사 후 폐암으로 판정 받은 환자 30명을 대상으로, 본 연구의 결과에서 산출된 RC를 적용하여 PVE 보정 전과 후 SUV를 비교 분석하였다. 열소 원통과 배후방사능이 4:1일 때 2.5, 1.6, 1.2, 0.8 cm 에서의 RC는 각각 0.75, 0.72, 0.40, 0.27이었고, 6:1일 때 0.74, 0.59, 0.55, 0.43이었으며, 8:1일 때 0.77, 0.76, 0.58, 0.42로 열소 영역의 크기가 작아질수록 RC가 감소하였다. 폐암으로 판정 받은 환자 중에서 30명의 환자를 무작위 표본 추출하여 보정 전과 후의 SUV 최대값을 비교 분석 한 결과, 보정 전 평균은 7.83이었고 보정 후 평균은 10.31이었다. 또한 보정 전과 후의 SUV 최대값을 대응 표본 t 검정으로 차이를 분석한 결과, 통계적으로 유의한 차이가 있었다(t=7.21, p=0.000). PVE에 의해서 과소 평가 되었던 보정 전의 SUV가 보정 후에는 증가되는 것을 확인할 수 있었다. 병변의 크기와 H/B ratio가 환자마다 제각기 다른 값을 갖기 때문에, RC를 사용하여 PVE를 보정한 SUV가 정확한 값이라고 판단하기는 어려우나 PVE에 의해 감소된 SUV를 실제 값과 유사하게 보정할 수 있는 방법일 것으로 생각된다.

• 한국식품과학회지
• /
• 제44권1호
• /
• pp.21-27
• /
• 2012

본 연구에서는 주요섭취 가공식품(우유, 식용유지, 마가린) 3개 품목에 대한 납, 카드뮴, 비소의 기준 규격 설정을 위해 가공식품 총 287건을 전국 8개 권역(강원, 경기, 경남, 경북, 충청, 전남, 전북, 경남, 제주)에서 수거하고 각 시료를 microwave 분해법으로 전처리 하였다. 시료의 산분해 전처리 시 보다 객관화된 시료 전처리 방법의 확립을 위해 잔여 $^{12}C$ intensity를 ICP-MS로 측정하여 가장 분해정도가 우수한 조건(검체량, 질산량, 과산화수소량)을 선정하였다. 최적조건에서 전처리한 시료의 납, 카드뮴, 비소 함량은 ICP-MS로 분석하였다. 정량한계(Limit of quantification, LOQ)는 납의 경우, 우유 0.3 ${\mu}g/kg$, 식용유지, 마가린 0.61 ${\mu}g/kg$ 이었고, 카드뮴의 경우, 우유 0.15 ${\mu}g/kg$, 식용유지, 마가린 0.31 ${\mu}g/kg$이었다. 비소의 경우, 우유 0.45 ${\mu}g/kg$, 식용유지, 마가린 0.91 ${\mu}g/kg$이었다. 납, 카드뮴, 비소의 회수율은 납 92.6-98.0%, 카드뮴 91.2-98.9%, 비소 97.9-105.6% 수준 이었다 모니터링 결과, 가공식품의 납의 평균함량은 우유 2.395 ${\mu}g/kg$, 식용유지 7.656 ${\mu}g/kg$이었으며, 카드뮴의 평균함량은 우유 0.483 ${\mu}g/kg$, 식용유지 0.380 ${\mu}g/kg$이었다. 비소의 평균함량은 우유 0.781 ${\mu}g/kg$, 식용유지 1.241 ${\mu}g/kg$이었다. 가공식품의 Codex 납 기준 0.02-0.1 mg/kg, 카드뮴 0.1 mg/kg, 비소 0.1 mg/kg 수준과 비교해 볼 때, 모든 검체에서 기준보다 낮은 수준이었다. 2005년 국민건강조사 DB에서 조사대상 인구집단 전체를 대상으로 위해평가 한 결과 대상 식품들의 납, 카드뮴, 비소의 인체노출수준을 JECFA의 납, 카드뮴, 비소의 잠정주간섭취허용량으로 나누어 위해지수를 산출한 결과, 1.0 보다 훨씬 낮게 나타남으로 위해도는 매우 낮은 수준으로 판단된다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제29권2호
• /
• pp.83-92
• /
• 2006

ICRU 38의 권고에 따른 치료계획과 PTV를 토대로 한 치료계획을 세워 환자의 움직임을 고려하여 설정한 종양 용적(이하 PTV라 표기) 전체를 치료하고 주변 정상조직에 선량을 최소화하는 방안에 대해 연구하고자 하였으며, 본 연구는 국립암센터 방사선종양학과에서 2002년 1월부터 2003년 2월까지 방사선치료와 항암화학 치료를 동시에 시행한 30명의 자궁경부암 환자를 대상으로 하였다. 병기의 분포는 각각 stage IB 1명, IIA 3명, IIB 19명, IIIA 3명, IIIB 3명, IV 1명이었다. 모든 환자에 대해 방사선치료를 시행하기 전에 MRI를 시행하였으며 MR 영상에서 원발종양용적(GTV: Gross Tumor Volume, 이하 GTV라 표기)의 최대 직경이 17명의 환자에서 4 cm 이하이었고, 12명은 $4{\sim}6\;cm$, 1명은 6 cm 이상이었다. 연구 결과 PTV 치료계획을 통해 잔류종양의 크기가 작은 경우 불필요하게 방사선이 조사되는 용적을 줄이면서(p<0.0001) 최적의 선량분포를 만들어 낼 수 있지만 종양의 크기가 큰 경우 오히려 전체 종양을 포함하는 치료계획을 수립할 때 주변 정상조직에 불필요하게 많은 선량이 투여되게 된다. 이러한 이유는 Fletcher Williamson Applicator의 구조상 일부분의 방사선 강도를 탄력적으로 조절하는데 한계가 있기 때문인 것으로 사료된다. 본 연구에서는 applicator의 한계를 극복하고 최적의 선량분포를 얻기 위하여 Fletcher Williamson Applicator에 조직내 삽입용 바늘 4개를 종양의 크기가 큰 10명의 환자 중 기하학적으로 바늘의 삽입이 불가능한 1명의 환자를 제외하고 9명의 환자에 대해 가상으로 삽입하여 선량의 변화를 조사하였다. 그 결과 Virtual 치료계획이 PTV 치료계획뿐 아니라 ICRU 치료계획에 비해 100% 등선량 용적(p=0.0608, p=0.0607) 및 PTV 이외의 정상조직에 불필요하게 조사되는 용적(p=0.0162, p=0.008)을 현저히 감소시킬 수 있는 것으로 나타났다.

• 한국과학예술포럼
• /
• 제37권4호
• /
• pp.149-159
• /
• 2019

본 연구는 김해의 구도심 중심지역인 동상동 종로길 간판개선사업을 위해 대상지 간판 색채 현황을 파악하고 개선 방향을 제안하기 위해 시작되었다. 연구대상 지역은 오래된 시설물로 침체한 거리 분위기를 형성하며, 구도심 간판의 전형적인 유형으로 재정비가 필요한 실정이다. 이에 본 연구의 목적은 간판과 관련한 선행 연구 및 유사 간판 개선 사례를 조사한 후, 대상 지역의 간판 색채 조사를 통해 주조 색, 보조색, 강조 색을 분류하여 색채 현황을 파악하고 이를 바탕으로 향후 진행될 간판 사업에 바람직한 방향을 복합적으로 제안하는 것이다. 이에 본 논문은 대상 구간을 업종별로 나누어 간판 색채 분석을 시행하였다. 연구 결과 및 내용은 다음과 같다. 첫째, 전반적인 업소들의 주조 색 간판은 L*값이 평균적으로 높아 고명도와 고채도의 색채를 가지고 다양한 원색 분포를 보였다. 둘째, 보조 색은 대부분 백색 혹은 흑색 계열의 무채색을 사용하여 주조 색과 대비되는 색채를 선택하고 있었다. 셋째, 강조 색은 a*값이 양수(+)에 높은 분포를 보여 적색 혹은 황색 계열과 같이 난색 위주로 분포되어 있었다. 그러나 전 구간 점포들은 중간색보다 채도가 높은 색을 사용하고 있었기 때문에 통일성이 부족하며 이는 거리의 미관을 저해하는 원인이 되고 있다. 이러한 연구 결과를 바탕으로 향후 김해간판개선사업 색채 계획은 다양한 색을 사용하기보다 어느 정도 색채 수를 제한하고 김해시 대표색을 중심으로 무채색과 난색을 적절히 활용하는 것이 지역의 특색을 살리며 시각적으로 편안함과 안정감을 동시에 부여할 것으로 생각된다.

• 산업식품공학
• /
• 제21권3호
• /
• pp.225-232
• /
• 2017

본 연구에서는 홍삼분말 입자크기 $10.00{\mu}m$ 이하의 홍삼분말과 $100.00{\mu}m$ 이상의 홍삼분말 간의 이화학적 특성 및 추출 효율성분 함량을 비교분석하였으며, 분산안정성을 기반으로 가공공정에서 적합한 홍삼분말 입자크기를 조사하였다. 본 연구에 사용된 홍삼분말은 $158.00{\mu}m$, $8.45{\mu}m$, $6.33{\mu}m$ 의 입도크기를 가졌으며, 각각 RG A, RG B, RG C로 표현하였다. 본 연구에서는 홍삼분말(2.6%, w/v)을 증류수에 분산시킨 홍삼용액을 4주 동안 저장 온도 $4^{\circ}C$, $25^{\circ}C$, $40^{\circ}C$에 각각 보관하였으며, 이에 따른 갈색도 및 지방산패도 변화를 확인하였다. 갈색도는 홍삼분말 입자크기와 관계없이 저장온도 및 시간에 따라 갈색도 값이 감소하였으며, 지방산패도(TBA)의 값은 저장온도에 상관없이 4주 동안 유의적으로 증가하였으나 홍삼분말의 지방함량이 낮아 지방산패도 값은 0.1 미만의 낮은 값을 보였다. 분산 안정성을 나타내는 backscatterting 값은 홍삼분말을 이용한 제품 가공시 적합한 입자크기를 알아보기 위하여 측정하였으며, RG A는 RG B 및 RG C와 다르게 분산직후 바로 침전이 되어 용기의 바닥부분에서 높은 backscattering 값을 보였다. RG B는 분산 10시간 이전까지 RG C보다 낮은 TSI 값을 보였으며, 10시간 이후 RG C와 같은 분산안정성을 보였다. RG A, RG B, RG C의 DPPH 및 ABTS 자유 라디칼 소거능의 $IC_{50}$ 값들은 각각 2.74-3.34 mg/mL, 2.77-2.95 mg/mL으로 홍삼분말 입자크기에 따른 유의적인 차이를 보이지 않았다. 일반적으로 홍삼분말의 입자크기 감소는 표면적 증가로 이어져 유효성분 추출 효율성이 증가하지만, 본 실험에서 RG A, RG B, RG C 간의 유효성분 추출에 큰 차이를 보이지 않은 것은 미세한 입자가 열수추출 과정 중 입자간 뭉침현상이 발생하여 표면적 증가와 관련있는 것으로 고려된다. 홍삼분말의 ginsenoside 총 함량은 24.28 mg/g 및 24.53 mg/g로 입자크기에 따른 유의적 차이를 보이지 않았으나, ginsenoside $Rg_1$, Re, $Rh_2$ 함량은 RG C가 RG A보다 유의적으로 높은 값을 가졌다. 따라서 홍삼분말 입자크기는 갈색도, 지방산패도, 항산화 효과에 큰 영향을 미치지 않지만 미세한 입자크기를 가진 홍삼분말이 분산안정성이 좋아 홍삼분말을 이용한 홍삼제품 가공공정에 보다 적합할 것으로 사료된다.

• 지능정보연구
• /
• 제27권1호
• /
• pp.1-21
• /
• 2021

글로벌 경영환경 변화로 기술개발과 시장니즈의 불확실성이 커지고 기업 간 상호 경쟁이 심화되면서 개별 기업들의 연구개발 활동에 대한 관심과 요구가 증가하고 있다. 이러한 환경변화에 대응하기 위하여 연구개발 기업들은 설비투자에 더욱 신중을 가하면서 연구개발의 질적인 경쟁력을 제고시키기 위한 수단 중 하나로 연구개발 투자를 강화하고 있다. 결과적으로 설비나 연구개발 투자 요소는 연구개발 기업들의 입장에서는 미래 불확실성을 떠안아야하는 부담이 될 수 밖에 없다. 단지 연구개발 역량을 제고시키기 위한 수단으로 연구개발 투자를 증가시키는 경영 전략은 기업성과측면에서 불확실성이 높은 것이 사실이다. 본 연구에서는 데이터마이닝 기법을 활용하여 기업들의 연구개발 역량에 영향을 주는 특성들을 기술경영능력, 연구개발능력, 그리고 기업분류 속성 관점에서 탐색하고 이러한 개별 요인들이 연구개발 역량의 수준에 따라 나타나는 특성들을 탐색하였다. 이를 위해서 국내 연구개발 기업 전체를 대상으로 증거데이터에 근거해 군집분석과 실험결과를 제시하였다. 상기의 3개 관점마다 세부 평가지표를 각각 7개, 2개, 4개로 구성하여 해당 영역에서의 개별적인 수준을 정량적으로 측정하고자 하였다. 기술경영능력과 연구개발능력의 경우 현행 기술력 평가기관들이 주도적으로 활용하고 있는 소항목 평가지표를 참조하였으며, 이때 정량적으로 자료 확보가능한지 여부를 고려하여 최종적인 세부 평가지표를 새롭게 구성하였다. 기업분류 속성의 경우에는 가장 기본적인 기업 분류 프로파일 정보를 고려하여 구성하였다. 특히 연구개발 역량수준의 동질성 파악을 위해서 기술경영능력과 연구개발능력의 세부평가지표를 활용하여 개별기업별 종합점수를 부여하였으며, 이때 역량수준을 5개의 등급으로 분류하여 군집분석 결과와 비교하였다. 분석된 군집과 역량수준 등급과의 비교평가에 따른 의미를 부여하기 위해서 군집별로 연구개발 역량수준이 높은 경향과 낮은 경향이 존재하는 군집들을 탐색하였다. 이후 해당 군집에서 세부 평가지표에 따른 특징들을 분석하였다. 이와 같은 연구수행 방법을 통해 연구 개발 역량수준이 높은 군집이 2개, 낮은 군집이 1개로 분석되었으며, 나머지 2개의 군집들은 역량수준이 거의 높은 발생 빈도로 유사하게 나타났다. 결과적으로 본 연구에서는 역량수준이 높은 2개 군집과 낮은 1개의 군집들을 대상으로 세부 평가지표에 따른 개별적 특징들을 분석하였다. 본 연구의 결과가 제시하고 있는 시사점은 기술변화 속도와 시장수요의 변화에 효과적으로 대응할 수 있는 전문 경영자의 교체주기가 빠를수록 연구개발 역량 제고에 기여할 가능성이 높다는 점이다. 개인기업의 경우에 법인기업으로의 전환을 통해 연구개발 인력들의 기업에 대한 소속감을 제고시킴으로써 연구개발 역량의 투입강도를 높일 필요가 있으며, 조직적 측면에서도 팀단위의 조직구성을 통해 책임과 권한의 정확성을 제공할 필요가 있다는 점이다. 기술상용화 실적건수나 기술인증건수는 역량제고에 기여하는 경우와 그렇지 않은 경우 모두 발생되고 있어, 경영자 입장에서 연구개발 역량제고를 위한 중요 인자로 검토하는데 한계가 있는 것으로 확인되었다. 마지막으로 실용신안출원의 경험 여부는 연구개발 역량에 중요한 영향을 미치는 요인으로 파악되어, 연구개발 역량 제고를 위해서는 실용신안출원 장려를 위한 동기부여를 제공할 필요성을 확인하였다. 이처럼 본 연구결과는 개별 기업들의 연구개발 역량 제고를 위한 기업 경영전략의 중요한 시사점을 제공할 수 있을 것으로 기대된다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.