• Steel and Composite Structures
• /
• v.33 no.5
• /
• pp.629-640
• /
• 2019

This paper presents a theoretical and finite element (FE) study on the stress intensity factors of double-edged cracked steel beams strengthened with carbon fiber reinforced polymer (CFRP) plates. By simplifying the tension flange of the steel beam using a steel plate in tension, the solutions obtained for the stress intensity factors of the double-edged cracked steel plate strengthened with CFRP plates were used to evaluate those of the steel beam specimens. The correction factor α₁ was modified based on the transformed section method, and an additional correction factor φ was introduced into the expressions. Three-dimensional FE modeling was conducted to calculate the stress intensity factors. Numerous combinations of the specimen geometry, crack length, CFRP thickness and Young's modulus, adhesive thickness and shear modulus were analyzed. The numerical results were used to investigate the variations in the stress intensity factor and the additional correction factor φ. The proposed expressions are a function of applied stress, crack length, the ratio between the crack length and half the width of the tension flange, the stiffness ratio between the CFRP plate and tension flange, adhesive shear modulus and thickness. Finally, the proposed expressions were verified by comparing the theoretical and numerical results.

• Journal of Korea Multimedia Society
• /
• v.24 no.11
• /
• pp.1461-1471
• /
• 2021

This paper presents a light exposure correction algorithm for less pleasant images, acquired with a light metering failure. Since conventional tone mapping and gamma correction methods adopt a function mapping with the same range of input and output, the results are pleasurable for almost symmetric distributions to their intensity average. However, their corrections gave insufficient outputs for asymmetric cases at either bright or dark regions. Also, histogram modification approaches show good results on varied pattern images, but these generate unintentional noises at flat regions because of the compulsive shift of the intensity distribution. Therefore, in order to sufficient corrections for both bright and dark areas, the proposed algorithm calculates the gamma coefficients using primary parameters extracted from the global distribution. And the fusion weights are adaptively determined with complementary parameters, considering the classification information of a binary segmentation. As the result, the proposed algorithm can obtain a good output about both the symmetric and the asymmetric distribution images even with severe exposure values.

• Journal of Korea Multimedia Society
• /
• v.19 no.5
• /
• pp.837-847
• /
• 2016

Tone mapping for High Dynamic Range(HDR) image provides matching human visual perception between real world scene and displayable devices. Recently, a tone mapping algorithm based on localized gamma correction is proposed. This algorithm is using human visual properties of contrast and colorfulness with background intensity, generating a weight map for gamma correction. However, this method have limitations of controlling enhancement region as well as generating halo artifacts caused by the weight map construction. To overcome aforementioned limitations, proposed algorithm in this paper modifies previous weight map, considering base layer intensity of input luminance channel. By determining enhancement region locally and globally based on base layer intensity, gamma values are corrected accordingly. Therefore, proposed algorithm selectively enhances local brightness and controls strength of edges. Subjective evaluation using z-score shows that our proposed algorithm outperforms the conventional methods.

• Journal of Internet Computing and Services
• /
• v.7 no.4
• /
• pp.33-43
• /
• 2006

This paper proposes a method to extract coronary arteries effectively in the angiography, In general. DSA(Digital Subtraction Angiography) is a well-established technique for the visualization of coronary arteries, DSA involves the subtraction of a mask image, an image of a heart before the injection of contrast medium, from a live image, However, this technique is sensitive to the movement of background and can cause wrong detection due to the variance of background intensity between two images. Therefore, this paper solves the structural problem resulted from background movement by selecting an image which has the least difference of movement through the similarity analysis of background texture, and it extracts only the blood vessels effectively through local intensity correction of the selected images, Experimental results show that the proposed method has the lower false-detection rate and higher accuracy rate than existing methods.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.270-273
• /
• 2007

In this paper, a SAR-despeck1ing approach of adaptive iteration based a Bayesian model using the lognormal distribution for image intensity and a Gibbs random field (GRF) for image texture is proposed for noise removal of the images that are corrupted by multiplicative speckle noise. When the image intensity is logarithmically transformed, the speckle noise is approximately Gaussian additive noise, and it tends to a normal probability much faster than the intensity distribution. The MRF is incorporated into digital image analysis by viewing pixel types as states of molecules in a lattice-like physical system. The iterative approach based on MRF is very effective for the inner areas of regions in the observed scene, but may result in yielding false reconstruction around the boundaries due to using wrong information of adjacent regions with different characteristics. The proposed method suggests an adaptive approach using variable parameters depending on the location of reconstructed area, that is, how near to the boundary. The proximity of boundary is estimated by the statistics based on edge value, standard deviation, entropy, and the 4th moment of intensity distribution.

• Investigative Magnetic Resonance Imaging
• /
• v.9 no.1
• /
• pp.36-42
• /
• 2005

Purpose : To develop a novel approach to calculate the sensitivity profiles of the phased array coil for use in non-uniform intensity correction. Materials and Methods : The proposed intensity correction method estimates the sensitivity profile of the coil to extract intensity variations that represent the scanned image. The sensitivity profile is estimated by fitting a non-linear curve to various angles of projections through the imaged object in order to eliminate the high-frequency image content. Filtered back projection is then used to compute the estimates of the sensitivity profile of each coil. The method was applied both to phantom and brain images from 8-channel phased-array coil and 4-channel phased-array coil, respectively. Results : Intensity-corrected images from the proposed method have more uniform intensity than those from the commonly used 'sum-of-squares' approach. By using the proposed correction method, the intensity variation was reduced to $6.1\%$ from $13.1\%$, acquired from the 'sum-of-squares'. Conclusion : The proposed method is more effective at correcting the intensity non-uniformity of the phased-array surface-coil images than the conventional 'sum-of-squares' method.

• The KIPS Transactions:PartB
• /
• v.18B no.5
• /
• pp.265-270
• /
• 2011

In this paper, we propose a method for intensity correction using binarization-based region segmentation in 3D stereoscopic images. In the proposed method, 3D stereoscopic right image is segmented using binarizarion. Small regions in the segmented image are eliminated. For each region in right image, a corresponding region in left image is decided through region matching using correlation coefficient. When region-based matching, in order to prevent overlap between regions, we remove a portion of the area closed to the region boundary using morphological filter. The intensity correction in left and right image can be performed through histogram specification between the corresponding regions. Simulation results show the proposed method has the smallest matching error than the conventional method when we generate the right image from the left image using block based motion compensation.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.5
• /
• pp.72-84
• /
• 1998

In order ot study the influence of a circular inclusion on a stress field near a crack tip, mutual interference of a slant crack and the circular inclusion is analyzed of a bimaterial inclusion. As the crack emanates at the equivalent slant crack angle the correction factors FⅠ and FⅡ for the inclusion wit small Young's modulus were found to decrease as the inclusion radius increased. The correction factors for inclusion with large Young's modulus increase as the inclusion radius increases at the equivalent radius of the inclusion, the correction factors decrease as the slant crack angle increases for the aspect ratio $\frac{c}{W}$ = 0.1 irrespective of the Young's modulus. For $\frac{c}{W}$ greater than 0.2, they increase as the slant crack angle increases. There is no influence of stress mutual interfce after crack emanates beyond the inclusion radius.

• Journal of Industrial Convergence
• /
• v.1 no.2
• /
• pp.53-67
• /
• 2003

This paper intends to contribute to the understanding of customer repurchase by studying the relationship between correction of postpurchase dissonance and intention of customer repurchase. Previous studies have broadly speculated on the relationship between the intensity of dissatisfaction and repurchase; few empirical results have, however, been reported. This study is based on a convenience sample of 257individuals who reported intensity of dissatisfaction and type of responses to dissatisfying retailing service situations. The results of an empirical study, the relationship is found between correction of postpurchase dissonance and intention of customer repurchase. And it examines the relatively important marketing factors influencing customer repurchase.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.269-278
• /
• 1999

When a variety of repeated loads are given, most steel structures failed in much lower level of loads than static failure loads. In addition, bridge always includes the internal defects or discontinuities. from these, fatigue cracks initiates and can lead to sudden failure. Thus, in this study, tensile specimens by the cover plate shapes were used as the test specimens. The fatigue test was performed by constant amplitude fatigue loading and beach mark. From the results of this study, each specimen's fatigue section was observed. in addition, stress intensity factor at crack tip was calculated by using the Green's function which applied to discontinuous section where causing stress concentration. Therefore, the fatigue life of structural detail was investigated by adopting the theories of fracture mechanics. each specimen's crack shape is a semi-elliptical surface crack or center crack sheet, stress gradient correction factor, Fg is the most subjective of all stress intensity correction factors and fatigue life should be predicted by previous proposed function and finite element analysis.