• Journal of Advanced Marine Engineering and Technology
• /
• 제20권3호
• /
• pp.154-161
• /
• 1996

A neural predictive tracking system for the control of structure-unknown dynamic system is presented. The control system comprises a neural network modelling mechanism for the the forward and inverse dynamics of a plant to be controlled, a feedforward controller, feedback controller, and an error prediction mechanism. The feedforward controller, a neural network model of the inverse dynamics, generates feedforward control signal to the plant. The feedback control signal is produced by the error prediction mechanism. The error predictor adopts the neural network models of the forward and inverse dynamics. Simulation results are presented to demonstrate the applicability of the proposed scheme to predictive tracking control problems.

• 한국지능시스템학회논문지
• /
• 제8권2호
• /
• pp.128-133
• /
• 1998

본 논문에서는 주어진 칼라 영상열을 분석하여 이동물체 추적을 할수 있는 병렬 프레임워크를 구축한다. 병렬 프레임워크는 크게 탐색 공간 축소 부분과 추적 부분으로 나뉘며 탐색 공간 축소 부분은 퍼지 클러스터링과 칼만 필터를 이용한 예측부분으로 구성되고 추적은 거리변환에 기반을 둔 하우스돌프 거리를 이용해 경계선 정합을 함으로써 이루어진다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 추계학술대회 학술발표 논문집 제16권 제2호
• /
• pp.220-223
• /
• 2006

본 논문은 모델트리 알고리즘인 M5에 부분최소법(PLS: Partial Least Square)을 적용하여 클로로필-a 농도의 예측 모델을 제안한다. 제안된 방법은 M5을 이용하여 모델트리를 구축한 후 잎노드에서 PLS를 적용하여 지역모델(local model)을 구축한다. 제안된 방법의 우수성을 보이기 위해 수질 데이터를 대상으로 실험한 결과 기존의 M5 방식에 비하여 향상된 성능을 보임을 알 수 있었다.

• Journal of Communications and Networks
• /
• 제6권3호
• /
• pp.245-257
• /
• 2004

Driven by the growing number of the mobile subscribers, efficient channel resource management plays a key role for provisioning multimedia service in the next generation personal communication systems. To reuse limited channel resources, diminishing the coverage areas of cells seems to be the ultimate solution. Thus, however, causes more handover events. To provide seamless connection environment for mobile terminals and applications, this article presents a novel handover scheme called the intelligent channel reservation (ICR) scheme, which exploits the location prediction technologies to accurately reserve channel resources for handover connections. Considering the fact that each mobile terminal has its individual mobility characteristic, the ICR scheme utilizes a channel reserving notification procedure (CRNP) to collect adequate parameters for predicting the future location of individual mobile terminals. These parameters will be utilized by the handover prediction function to estimate the expected handover blocking rate and the expected number of idle channels. Based on the handover prediction estimations, a cost function for calculating the damages from blocking the handover connections and idling channel resources, and a corresponding algorithm for minimizing the cost function are proposed. In addition, a guard channel decision maker (GCDM) determines the appropriate number of guard channels. The experimental results show that the ICR scheme does reduce the handover-blocking rate while keeping the number of idle channels small.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제3권1호
• /
• pp.1-6
• /
• 2003

The Delayed Feedback Control method (DFC) proposed by Pyragas applies an input based on the difference between the current state of the system, which is generating chaos orbits, and the $\tau$-time delayed state, and stabilizes the chaos orbit into a target. In DFC, the information about a position in the state space is unnecessary if the period of the unstable periodic orbit to stabilize is known. There exists the fault that DFC cannot stabilize the unstable periodic orbit when a linearlized system around the periodic point has an odd number property. There is the chaos control method using the prediction of the $\tau$-time future state (PDFC) proposed by Ushio et al. as the method to compensate this fault. Then, we propose a method such as improving the fault of the DFC. Namely, we combine DFC and PDFC with parameter W, which indicates the balance of both methods, not to lose each advantage. Therefore, we stabilize the state into the $\tau$ periodic orbit, and ask for the ranges of Wand gain K using Jury' method, and determine the quasi-optimum pair of (W, K) using a genetic algorithm. Finally, we apply the proposed method to a discrete-time chaotic system, and show the efficiency through some examples of numerical experiments.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제13권4호
• /
• pp.315-323
• /
• 2013

Vessel Traffic Service (VTS) is being used at ports and in coastal areas of the world for preventing accidents and improving efficiency of the vessels at sea on the basis of "IMO RESOLUTION A.857 (20) on Guidelines for Vessel Traffic Services". Currently, VTS plays an important role in the prevention of maritime accidents, as ships are required to participate in the system. Ships are diversified and traffic situations in ports and coastal areas have become more complicated than before. The role of VTS operator (VTSO) has been enlarged because of these reasons, and VTSO is required to be clearly aware of maritime situations and take decisions in emergency situations. In this paper, we propose a prediction table to improve the work of VTSO through the Cognitive Work Analysis (CWA), which analyzes the VTS work very systematically. The required data were collected through interviews and observations of 14 VTSOs. The prediction tool supports decision-making in terms of a proactive measure for the prevention of maritime accidents.

• 한국기계가공학회지
• /
• 제20권9호
• /
• pp.90-96
• /
• 2021

As real-time data of factories can be collected using various sensors, the adaptation of intelligent unmanned processing systems is spreading via the establishment of smart factories. In intelligent unmanned processing systems, data are collected in real time using sensors. The equipment is controlled by predicting future situations using the collected data. Particularly, a technology for the prediction of tool wear and for determining the exact timing of tool replacement is needed to prevent defected or unprocessed products due to tool breakage or tool wear. Directly measuring the tool wear in real time is difficult during the cutting process in milling. Therefore, tool wear should be predicted indirectly by analyzing the cutting load of the main spindle, current, vibration, noise, etc. In this study, data from the current and acceleration sensors; displacement data along the X, Y, and Z axes; tool wear value, and shape change data observed using Newroview were collected from the high-speed, two-edge, flat-end mill machining process of SKD11 steel. The support vector machine technique (machine learning technique) was applied to predict the amount of tool wear using the aforementioned data. Additionally, the prediction accuracies of all kernels were compared.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2003년도 제2회 정기총회 및 추계학술대회
• /
• pp.280-285
• /
• 2003

• 경영정보학연구
• /
• 제1권1호
• /
• pp.51-61
• /
• 1999

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 가을 학술발표회 논문집
• /
• pp.141-150
• /
• 1997