• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.130-135
• /
• 2007

In this paper, a direct model reference adaptive fuzzy control (MRAFC) scheme is developed for the plant model whose structure is represented by the MIMO Takagi-Sugeno fuzzy model. The MRAFC scheme is proposed to provide asymptotic tracking of a reference signal lot the systems with uncertain or slowly time-varying parameters. The developed control law and adaptive law guarantee that all signals in the closed-loop system are bounded. In addition, the plant state tracks the state of the reference model asymptotically with time tot any bounded reference input signal.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.42-58
• /
• 2008

Nowadays the installation of Real-time Traffic Signal Control system is gradually spread, in order to solve the traffic problem which become serious. The most important thing are reliability of data collection and functionality of system in Real-time Traffic Signal Control System. But, the evaluation for those introduction system are defective after system constructing. So, many systems are not working properly to those systems's primarily purpose. This study is executed expansion through field test and analysis which check performance and advise of system operation. It has purpose to establish of the maintenance system of Real-time Traffic Signal Control system. As the result of analysis, we could find the several problems in this study. So, we also could guess that the effective maintenance systems of the Real-time Traffic Signal Control system is necessary within few years.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.790-796
• /
• 1998

A novel mode of parallel operation of a modular 3-phase AC-DC flyback converter for power factor correction along with tight regulation was recently analyzed and presented. The advantage of the proposed converter does not require expensive high voltage and high current devices that are normally needed in popular boost type 3-phase converter. In this paper the detailed small signal analysis of the modular 3-phase AC-DC flyback converter is provided for control purposes and also experimental results are included to confirm the validity of the analysis.

• Journal of Power Electronics
• /
• v.7 no.2
• /
• pp.159-173
• /
• 2007

In this paper, an intelligent sliding-mode position controller (ISMC) for achieving favorable decoupling control and high precision position tracking performance of permanent-magnet synchronous motor (PMSM) servo drives is proposed. The intelligent position controller consists of a sliding-mode position controller (SMC) in the position feed-back loop in addition to an on-line trained fuzzy-neural-network model-following controller (FNNMFC) in the feedforward loop. The intelligent position controller combines the merits of the SMC with robust characteristics and the FNNMFC with on-line learning ability for periodic command tracking of a PMSM servo drive. The theoretical analyses of the sliding-mode position controller are described with a second order switching surface (PID) which is insensitive to parameter uncertainties and external load disturbances. To realize high dynamic performance in disturbance rejection and tracking characteristics, an on-line trained FNNMFC is proposed. The connective weights and membership functions of the FNNMFC are trained on-line according to the model-following error between the outputs of the reference model and the PMSM servo drive system. The FNNMFC generates an adaptive control signal which is added to the SMC output to attain robust model-following characteristics under different operating conditions regardless of parameter uncertainties and load disturbances. A computer simulation is developed to demonstrate the effectiveness of the proposed intelligent sliding mode position controller. The results confirm that the proposed ISMC grants robust performance and precise response to the reference model regardless of load disturbances and PMSM parameter uncertainties.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.3
• /
• pp.59-71
• /
• 2018

This study was initiated to develop an optimal signal control algorithm for coordinated signalized intersections using individual vehicle's information which can be collected in a format of prove vehicle data (PVD) via V2I (Vehicle to Infrastructure) communication environment. For developing this signal optimization algorithm, three modules were developed for phase group length computation, split distribution, and phase sequence assignment. The simulation analysis using the microscopic simulation model, Vissim, was conducted for evaluating the effectiveness of the developed algorithm. The analysis result represented that the performance of the developed algorithm is far superior to that of the fixed coordinated signal control method which is the most common signal control method for coordinated signalized intersections in Korea.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.25-37
• /
• 2014

Recently, our local governments are conducting the introduction of tram system because it is recognized as an effective public transit that can solve a traffic jam in downtown, decreasing public transit share and environmental issues in world wide cities. We developed the Active Priority Control Strategy to efficiently operate a tram in our existing traffic signal system. This study organized the tram system for operating the Active Priority Signal Control, developed the algorithm that calculates a tram-stop dwell time in order to pass the downstream intersection without a stop. The dwell time is determined by arrival time at tram-stop, downstream signal time, and the location of a opposite tram, it can be reduced by choosing the optimal one among Signal Priority Controls. Using the VISSIM and VISVAP model, we conducted a simulation test for the city of Chang-won that it is expected to install a tram system. It showed that a developed signal control strategy is effective to prevent a tram's stop in intersections, to reduce a tram's travel time.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.421-428
• /
• 2007

This paper discusses a fitness of the control on intersection network using fuzzy analytic hierachy process. The validity of control of traffic signal on intersection is phase, cycle of intersection. But the aigent of traffic intersection network is relative of intersection article. Therefor the aigent of traffic network intersection is before intersection passing vechile number, delayed vechile number. Fuzzy analytic hierachy process clears the grade of validity of the fixed cycle time controller and adaptive fixed cycle time and fuzzy traffic controller and proposes a new control type a traffic signal by this fuzzy analytic hierachy process.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.631-637
• /
• 2010

In this paper, We propose a method of motion interpretation of pedestrian for active traffic signal control. We detect pedestrian object in a movie of crosswalk area by using the code book method and acquire contour information. To do this stage fast, we use parallel processing based on CUDA (Compute Unified Device Architecture). And we remove shadow which causes shape distortion of objects. Shadow removed object is judged by using the hilbert scan distance whether to human or noise. If the objects are judged as a human, we analyze pedestrian objects' motion, face area feature, waiting time to decide that they have intetion to across a crosswalk for pdestrians. Traffic signal can be controlled after judgement.

• Journal of Drive and Control
• /
• v.9 no.4
• /
• pp.32-41
• /
• 2012

Most diagnosis methods for servo valves requires installing spool displacement sensor or flow sensor as well as pressure sensor. The measurement of flow is hard to implement and many kinds of servovalves or proportional direction valves do not have a built-in spool displacement sensor. In this study, static performances of servovalve or proportional-direction-valve are studied theoretically and a diagnosis technique, which uses only load pressure and input current signal, is assessed. An experimental setup was made based upon a personal computer and the LabVIEW graphical language. A series of diagnosis tests were performed and the analysis results showed it possible to measure the pressure gain, hysteresis and null bias in a relatively simple methodology.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2587-2589
• /
• 1999

In this paper, we propose a new control scheme for a PWM inverter using digital control. Digital control has various advantages in comparison with conventional analogue control. It can achieve high frequency switching of inverter and can be little influenced for temperature variations and aging of devices. This digitally-controlled PWM inverter is implemented using a Digital Signal Processor(DSPTMS320F240). The simulation results are given to verify the DSP based PWM inverter design and implementation.