• Structural Engineering and Mechanics
• /
• v.53 no.6
• /
• pp.1271-1286
• /
• 2015

Recently, US NRC revised fracture toughness requirements as 10CFR50.61a to reduce the conservatism of 10CFR50.61. However, unlike previous studies relating to the initial regulation, structural integrity evaluations based on the alternative regulation are not sufficient. In the present study, PTS and P-T limit curve evaluations were carried out by using both regulations and resulting data were compared. With regard to the PTS evaluation, the results obtained from the alternative requirements were satisfied with the criterion whereas those obtained from the initial requirements did not meet the criterion. Also, with regard to the P-T limit curve evaluation, operating margin by 10CFR50.61a was greater than that by 10CFR50.61.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.2
• /
• pp.42-46
• /
• 2010

The evaluation method for the failure frequency of reactor vessel under pressurized thermal shock(PTS) is developed using probabilistic fracture mechanics. The probabilistic reactor integrity evaluation code, named R-PIE code, is developed. The validity and uncertainty of the R-PIE code is investigated. The reactor failure frequencies under PTS for Kori-1 nuclear power plant and other type of domestic nuclear power plants are evaluated. The reference PTS temperature for domestic nuclear power plants is obtained for the rule making against PTS failure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.5
• /
• pp.610-616
• /
• 2004

The aim of this study was to investigate the hydride embrittlement when the LBB evaluation was carried out for the integrity of PHWR Pressure Tubes. The transverse tensile and CCT toughness tests were performed at three hydrogen concentrations while the test temperatures were changed (RT to 30$0^{\circ}C$). Both the transverse tensile and the fracture toughness tests showed the hydrogen embitterment clearly at RT but this phenomenon was disappeared while the test temperature arrived at 25$0^{\circ}C$. Using the DHC test results, the CCL and LBB time were calculated and compared. The hydride embrittlement at the LBB evaluation made the LBB time short definedly. If the operating temperature, DHCV and LBB deterministic parameters such as A and m were known, LBB time could be estimated without the calculation of CCL.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.9-19
• /
• 2011

Most real world design evaluation and risk-based decision support combine quantitative and qualitative (linguistic) variables. Decision making based on conventional mathematics that combines qualitative and quantitative concepts always exhibit difficulty in modelling actual problems. The successful selection process for choosing a design/procurement proposal is based on a high degree of technical integrity, safety levels and low costs in construction, corrective measures, maintenance, operation, inspection and preventive measures. In this paper, a design decision support framework using a composite structure methodology grounded in approximate reasoning approach and evidential reasoning method is suggested for design evaluation of machinery space of a ship engine room at the initial stages. An illustrative example is used to demonstrate the application of the proposed framework.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.1
• /
• pp.47-56
• /
• 2009

Rock bolts and shotcrete play a crucial role as a main support system in the underground space. Thus, the safety of the underground space may be affected by the defect of rock bolts. In order to evaluate the rock bolt integrity by using non-destructive technique, the transmission method of the guided ultrasonic waves, which are generated by using the piezo disk elements has been successfully performed. The energy generated by the piezo disk elements, however, is not enough for the rock bolts in the field. In addition, the piezo disk elements should be installed at the end of the steel bar during construction of the rock bolts. The purpose of this study is the devolvement of the reflection method, which may generate enough energy, and the application in the field rock bolts. Both laboratory and field tests are carried out. The guided ultrasonic waves with high energy are generated by the hammer impact with the center punch, and the AE sensor is used to measure the reflected guided waves. The received guided waves are analyzed by the wavelet transform. The peak value of the wavelet transform produces the energy velocity, which is used for the evaluation of the rock bolt integrity. The energy velocity increases with an increase in the defect ratio in both laboratory and field rock bolts. This study demonstrates that the hammer-impact reflection method may be a suitable method for the evaluation of the rock bolt in the field.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.2
• /
• pp.229-235
• /
• 2021

Blockchain, recognized as one of the core technologies of the 4th industrial revolution, is an Internet-based distributed data management system which does not require centralized control. Blockchain is characterized by the integrity and reliability of information, and blockchains can be used where such characteristics are required. Typical applications of blockchain include finance, transaction, and evaluation management. In this paper, we designed a blockchain-based evaluation management system that allows users to freely create and manage evaluation instances. Evaluation managers can create an evaluation instance according to their purpose and allocate evaluation items and evaluators. When the evaluators finish evaluating the evaluation items, the evaluation manager can aggregate the evaluation results for the instance. Someone, who want to perform evaluation for various purposes but do not have an evaluation system, can implement the evaluation system relatively simply by using this system. In addition, due to the characteristic of the blockchain, evaluators cannot modify the evaluation scores they have already recorded, and neither the system administrator nor the evaluation administrator can modify the evaluation scores. For this reason, the reliability of the evaluation increases.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.979-984
• /
• 2001

Poor water-proofing integrity is related to many factors : site procedure, workmanship, weather. substrate conditions, installation(including asphalt application) conditions. The evaluation of adhesive properties tested by concrete surface moisture and asphalt application was based on laboratory test and observations. This report describes the pull-off test results of waterproofing systems currently used for installing and reparing for concrete bridge decks. The test results showed that the moisture condition fully affected the adhesive properties of sheet membranes and sealer but partially for liquid membranes.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2005.03a
• /
• pp.14-15
• /
• 2005

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.4
• /
• pp.9-16
• /
• 2001

This paper is to represent the cross-border mobility of experienced Professional Engineers by establishing and maintaining an EMF International Register of Professional Engineers which is based on confidence in the integrity of national assessment system and a system of mutual recognition secured through continuing mutual inspection and evaluation of these systems. This paper would cover develop, monitor, maintain and promote mutually acceptable standards and criteria for facilitating the cross-border mobility of experienced Professional Engineers based on. Engineers Mobility Forum Agreement Sifted 25 June 2001, Thornybush. South Africa

• Proceedings of the KWS Conference
• /
• 2008.05a
• /
• pp.9-9
• /
• 2008