• 한국BIM학회 논문집
• /
• 제8권2호
• /
• pp.1-9
• /
• 2018

Nowadays Building Information Modeling (BIM) is a significant source of sharing project information in the construction industry. This method of sharing the information enhances the project understanding among stakeholders. Modeling of information using BIM is becoming an essential part of many construction projects around the globe. Despite rapid adoption of BIM in construction industry still, some sectors of the industry like earthwork have not yet reaped its full benefits. BIM has brought a paradigm shift through identification and integration of the roles and responsibilities of project participants on a single platform. BIM is a 3D model-based process which provides the insight into the efficient project planning and design. The 3D modeling can also be used significantly for the design of temporary structures in an earthwork project. This paper presents the quantity take-off methodology and parametric modeling technique for creating the temporary structures using 3D BIM process. A case study is conducted to implement the proposed temporary structure family design on a real site project. The study presented is beneficial for the earthwork project stakeholders to extract the relevant information using 3D BIM models in a project. It provides an opportunity to calculate the quantity of material required for a project accurately.

• 한국건축시공학회지
• /
• 제22권2호
• /
• pp.171-182
• /
• 2022

주기적인 건축물 안전진단은 구조적 안전성 및 잠재적 위험을 조기에 파악할 수 있다. 하지만 기존의 수집 방식은 비정형화된 형태의 주관적 데이터가 주로 사용되며, 노동집약적이고 시간 소모적이기 때문에 신뢰성이 떨어진다. 이에 본 연구는 3D 레이저 스캐너를 이용하여 건축물 노후 상태 정보를 수집하고 Building Information Modeling(BIM)으로 통합하여 시각화하는 방안을 제안하며, 순서는 다음과 같다: (1) 3D 레이저 스캐너와 파이썬 스크립트를 통한 데이터 수집, (2) Scan-to-BIM 프로세스, (3) 다이나모를 이용한 상태 데이터 시각화 및 정보 통합. 이를 통해 데이터 저장과 보고서 및 도면 작성 과정의 생략에 따른 시간 단축 효과를 확인하였다. 또한 시각화된 3D 모델은 건축물 유지관리자가 효율적인 결정을 할 수 있도록 한다. 이를 통해 유지관리 업무 효율성이 향상될 것으로 예상된다.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.1-6
• /
• 2002

The integration of Geographic Information Systems (GIS) with the hydrodynamic model was conducted in order to revitalize the use of geographical information and to aid in the understanding of tidal circulation patterns. A 2D finite difference numerical model was used to simulate n tidal circulation in the Suyoung Bay in Busan, Korea. CIS, especially the ArcView S/W is used to input the data of the numerical model, and is also used for the visualization of model outputs on the ground in the loosely coupled method. In this paper, an electronic navigational chart (ENC), which provides more accurate information in the ocean and coastal areas than any other digital information, is used as a base map for this integration. With the help of GIS, the integration can support th understanding of oceanographic information.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1064-1081
• /
• 2014

This paper presents a numerical analysis of slamming and whipping using a fully coupled hydroelastic model. The coupled model uses a 3-D Rankine panel method, a 1-D or 3-D finite element method, and a 2-D Generalized Wagner Model (GWM), which are strongly coupled in time domain. First, the GWM is validated against results of a free drop test of wedges. Second, the fully coupled method is validated against model test results for a 10,000 twenty-foot equivalent unit (TEU) containership. Slamming pressures and whipping responses to regular waves are compared. A spatial distribution of local slamming forces is measured using 14 force sensors in the model test, and it is compared with the integration of the pressure distribution by the computation. Furthermore, the pressure is decomposed into the added mass, impact, and hydrostatic components, in the computational results. The validity and characteristics of the numerical model are discussed.

• 마이크로전자및패키징학회지
• /
• 제29권4호
• /
• pp.1-8
• /
• 2022

TSV 기술을 포함한 고밀도, 고집적 패키징 기술은 IoT, 6G/5G 통신, HPC (high-performance computing)등 여러 분야에서 중요한 기술로 여겨지고 있다. 2차원에서 고집적화를 달성하는 것은 물리적 한계에 도달하게 되었으며, 따라서 3D 패키징 기술을 위하여 다양한 연구들이 진행되고 있다. 본 고에서는 scallop의 형성 원인과 영향, 매끈한 측벽을 만들기 위한 scallop-free 에칭 기술, TSV 표면의 Cu bonding에 대해서 자세히 조사하였다. 이러한 기술들은 고품질 TSV 형성 및 3D 패키징 기술에 영향을 줄 것으로 예상한다.

• Design & Manufacturing
• /
• 제9권2호
• /
• pp.1-5
• /
• 2015

Recently, as small-sized display products such as mobile phones and digital cameras have become lighter and smaller, the size of electric signal delivery part, connector for the mobile display products, also, needs to become smaller, so high-density integration like shortening the distance between signal delivery media, conductors is necessary. With the micro and high-density integration of the connector, it is necessary to maintain contact to a certain degree for keeping intensity and delivering electric signal smoothly to prevent a defect with a specific impact. Accordingly, this study carried out a structural analysis according to the operating mechanisms of 0.16CHP Class Bottom Contact FPC Connector and 0.24CHP Class BTB Connector mostly used in small-sized mobile display products such as mobile phones and digital cameras. As a result of the analysis, both connectors had lower than 997MPa, yield strength of connector material C5240-XSH, so it is judged that permanent plastic deformation would not occur, and that a contact force between the connector and FPC film occurs to a certain degree, so that there would not be any defect in electric signal delivery.

• ETRI Journal
• /
• 제28권1호
• /
• pp.103-106
• /
• 2006

We have fabricated a planar lightwave circuit (PLC) hybrid-integrated optical sub-assembly of a triplexer using a thin film filter (TFF)-attached wavelength division multiplexer (WDM) and photodiode (PD) carriers. Two types of TFFs were attached to a diced side of a silica-terraced PLC platform, and the PD carriers with a $45^{\circ}$ mirror on which pin-PDs were bonded were assembled with the platform. A clear transmitter eye-pattern and minimum receiver sensitivity of -24.5 dBm were obtained under 1.25 Gb/s operation for digital applications, and a second-order inter-modulation distortion (IMD2) of -70 dBc was achieved for an analog receiver.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1673-1675
• /
• 2004

The design, modeling and measurement of RF switch module for GSM applications is presented in this paper. RF switch module is constructed using a LTCC multi-layer switching circuit and integrated low pass filter. Insertion and return loss of the low pass filter were designed less than 0.3 dB and better than 12.7 dB at 900 MHz. The RF switch module contained 10 embedded passives and 3 surface mount components integrated on $4.6{\times}4.8{\times}1.2$ mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module was measured at 900 MHz was 11 dB.

• 수산해양기술연구
• /
• 제34권3호
• /
• pp.259-273
• /
• 1998

The hydroacoustic surveys to provide the essential information for the assessment, management and utilization of fishery resources in the southern waters of Korea were carried out during five research cruises between October 1996 and October 1997 by the training ship KAYA of Pukyong National University. These hydroacoustic investigations were designed to obtain more precise estimates of the geographic distribution, absolute abundance and biological characteristics of the fishery resources, and the vertically integrated densities of fish in terms of volume backscattering strength(SV) by survey region and depth bins, such as the entire water column and the 0~ 10 m from bottom fraction, were measured separately. Hydroacoustic data were collected by using a Simrad EK 500 Scientific echo sounder operating at two frequencies of 38kHz and 120kHz and the data stored in field were later processed on a HP PC using a Simrad EP 500 echo integration and target strength analysis system. The biological compositions of echo signal were identified and sampled using a demersal trawl during daylight hours. The mean target strength to scale the echo integration data for hydroacoustic surveys was derived from the relationship between the SV and the weight of trawl catch per unit volume of the water column sampled by demersal trawls. The results obtained can be summarized as follow : 1. The mean volume backscattering strength for the entire water column in the southern waters of Korea between 1996 and 1997 were -67.2 dB and -70.9 dB at two frequencies of 38 kHz and 120 kHz , respectively, and for the bottom layer of the 0-10 m from bottom friction were -68.8 dB, -70.2 dB, respectively. That is, the volume backscattering strength for the entire water column at low frequency was higher than that at high frequency. 2. The relationship between the mean backscattering strength (〈SV〉, dB) for the depth strata of trawl hauls and the weight (C, kg/m3) per cubic meter of the catch sampled by bottom trawling in the southern waters of Korea in January and July 1997 were expressed by the following equations: 38 kHz : 〈SV〉= -28.2 + 10 log(C), 120 kHz : 〈SV〉= -32.4 + 10 log(C). The mean weight -normalized target strengths derived from these equitions were -28.2 dB/ kg, -32.4 dB/ kg at 38 kHz and 120 kHz , respectively. That is, the mean weight -normalized target strength at 38 kHz was 4.2 dB higher than that at 120 kHz. 3. The distribution density of fish in terms of biomass per unit volume in the southern waters of Korea were estimated to be 125.9 $\times$ 10-6 kg/m3 and 141.3 $\times$ 10-6 kg/m3 at 38 kHz and 120 kHz , respectively.

• 센서학회지
• /
• 제20권3호
• /
• pp.145-150
• /
• 2011

In this paper, we designed a tunable microstrip patch antenna using RF MEMS switches. The design and simulation of the antenna were performed using a high frequency structure simulator(HFSS). The antenna was designed for use in the ISM band and either operates at 2.4 GHz or 5.7 GHz achieving -10 dB return-loss bandwidths of 20 MHz and 180 MHz, respectively. In order to obtain high efficiency and improve the ease of integration, a high resistivity silicon(HRS) wafer on a glass substrate was used for the antenna. The antenna achieved high gains: 8 dB at 5.7 GHz and 1 dB at 2.4 GHz. The RF MEMS DC contact switches were simulated and analyzed using ANSYS software.