• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1911-1932
• /
• 2013

Orthogonal frequency-division multiplexing (OFDM) has become a popular modulation scheme for wireless protocols because of its spectral efficiency and robustness against multipath interference. Although the components of various OFDM protocols are functionally similar, they remain distinct because of the characteristics of the environment. Recently, graphics processing units (GPUs) have been used to accelerate the signal processing of the physical layer (PHY) because of their great computational power, high development efficiency, and flexibility. In this paper, we describe the implementation of parameterized baseband modules using GPUs for two different OFDM protocols, namely, 802.11a and 802.16. First, we introduce various modules in the modulator/demodulator parts of the transmitter and receiver and analyze the computational complexity of each module. We then describe the integration of the GPU-based baseband modules of the two protocols using the parameterized method. GPU-based implementations are addressed to explain how to accelerate the baseband processing to archive real-time throughput. Finally, the performance results of each signal processing module are evaluated and analyzed. The experiments show that the GPU-based 802.11a and 802.16 PHY meet the real-time requirement and demonstrate good bit error ratio (BER) performance. The performance comparison indicates that our GPU-based implemented modules have better flexibility and throughput to the current ones.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.254-262
• /
• 2010

In order to evaluate vibration serviceability by means of non-contact vibration meter, serviceability of existing bridge were experimentally evaluated by using laser vibration meter. Test results were analyzed and compared with evaluation results acquired by using accelerometer and LVDT. To testify accuracy of laser vibration meter measured natural frequency were compared with that acquired by using accelerometer. According to test and comparison results it is showed that serviceability can be evaluated properly enough from the tolerance curve of Reiher-Meister for the estimated acceleration that can be calculated by the numerical differentiation of measured velocity. But because of cumulative numerical error occurred during integration of measured velocity in the time domain serviceability grade could be different from the result acquired by LVDT.

• Journal of the Korean housing association
• /
• v.28 no.2
• /
• pp.47-56
• /
• 2017

Sustainable development is one of the important concept of the 21st century. Especially, Social sustainability is an important factor in today's society with the weakened community, and is needed exploring social sustainability in the residential environment as a container of human life. The purpose of this study was to develop the evaluation indicators and evaluation system of social sustainability in residential environment. In order to develop evaluation indicators first, the delphi expert survey was conducted to assess the adequacy of selected the evaluation indicators in previous studies. Second, expert survey using the method of AHP was progressed in order to analyze importance and weight of evaluation indicators and was analyzed using Expert Choice. The findings of this study are as followings; the evaluation system was composed of locality, communality and organisms. The communality is the most important. The locality was composed of historical and cultural, reflection of regional identity and homogeneous of regions. Reflection of local identity is the most important in locality area. The communality was composed of social integration environment, community activities and the community space. The community activities are the most important in communality area. The organism was composed of employment, self-sufficiency, welfare, population, safety and housing. Safety is the most important in the organism area.

• Genomics & Informatics
• /
• v.7 no.2
• /
• pp.122-130
• /
• 2009

A systems biology approach for the identification of perturbed molecular functions is required to understand the complex progressive disease such as breast cancer. In this study, we analyze the microarray data with Gene Ontology terms of molecular functions to select perturbed molecular functional modules in breast cancer tissues based on the definition of Gene ontology Functional Code. The Gene Ontology is three structured vocabularies describing genes and its products in terms of their associated biological processes, cellular components and molecular functions. The Gene Ontology is hierarchically classified as a directed acyclic graph. However, it is difficult to visualize Gene Ontology as a directed tree since a Gene Ontology term may have more than one parent by providing multiple paths from the root. Therefore, we applied the definition of Gene Ontology codes by defining one or more GO code(s) to each GO term to visualize the hierarchical classification of GO terms as a network. The selected molecular functions could be considered as perturbed molecular functional modules that putatively contributes to the progression of disease. We evaluated the method by analyzing microarray dataset of breast cancer tissues; i.e., normal and invasive breast cancer tissues. Based on the integration approach, we selected several interesting perturbed molecular functions that are implicated in the progression of breast cancers. Moreover, these selected molecular functions include several known breast cancer-related genes. It is concluded from this study that the present strategy is capable of selecting perturbed molecular functions that putatively play roles in the progression of diseases and provides an improved interpretability of GO terms based on the definition of Gene Ontology codes.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.147-154
• /
• 2010

This paper suggests new route plan cost calculation and cost-effective route plan algorithm and architecture for the new city traffic information system when it is operated nationwide. New algorithm and architecture estimates cost with traffic speeds which is supported for all different lanes, stratifies logical layer which process different levels' traffic information with diverse traffic patterns and provides different traffic information in the few levels. Also suggested new algorithm supports drivers' customized traffic information through both-way communications and plans routes effectively based on the distance between drivers' start position and destination and different levels which start and end position located. It proposes additional research items and requirement for integration between different cities' traffic information system which the national police agency invested and led.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.92-98
• /
• 1991

The structures such as railway bridges can be modelled as the multi-span beam on the elastic foundation. These structures are usually subject to the moving load, which has a great effect on dynamic stresses and can cause severe motions, especially at high velocities. In this paper, the dynamic responses of the multi-span beam on the elastic foundation were obtained by using the Galerkin's method and the numerical time integration technique. As trial functions, the same orthogonal polynomial functions obtained in part 1, were used. From the numerical results, it was found that the one term expansion of the assumed solution usually leads to the accurate solutions. However, in the case that the stiffness of the transnational spring is very high or the rotational spring is placed where the slope of the first mode is zero, the higher modes must be included to obtain the accurate solutions.

• Korean Journal of Optics and Photonics
• /
• v.20 no.4
• /
• pp.217-222
• /
• 2009

In this paper, a low-cost hybrid-integrated tunable laser is realized using a polymer-ring resonator-based add/drop filter reflector and a reflective semiconductor optical amplifier. The add/drop filter reflector, composed of a double-ring resonator with different radii, can have characteristics of selective wavelength reflection and wide wavelength tuning with an aid of vernier effect derived from the radii difference. By hybrid-integrating the reflective semiconductor optical amplifier with the add/drop filter reflector, a tunable laser can be realized through an active alignment method. The hybrid laser exhibited a single mode lasing with side mode suppression ratio of 26 dB and full width half maximum of 0.03 nm. In addition, applying a low current as small as 25 mA onto electrodes over add/drop filter reflector, a wavelength tuning range of 17 nm could be obtained.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.317-327
• /
• 2014

In present company has been developed various systems for work efficiently and organized. However, each work developed Systems Environment differently by rapid IT advancement; it requires a lot of maintenance cost. Recently many companies need to do systems integration or downsizing migration to save costs for IT maintenance, but most of companies are now develop migration with built new systems by manual work or modify some part only. Also migration requires high cost. In this paper, by focusing in application on the environment of the system components, propose the recycling and utilization of automation tools, application method to reduce the migration cost.

• Clean Technology
• /
• v.11 no.4
• /
• pp.205-211
• /
• 2005

There have been many technologies and materials proposed for realizing microlens array, and plastic injection is recognized as the most promising one because of several merits such as optical properties, impact resistance, formability, lightening and environmental adaptability. Since PR reflow for injection template fabrication enables the lens shape control easier, and the sample technology more effective for mass production, it lowers the cost, enhances integration, and reduces process steps, which leads to be environmentally benign. However injection of polymers may face the difficulty of formability depending on their properties. In order to overcome the difficulty, fast heating/cooling technology was introduced in this study, and microlenses were fabricated and evaluated. template obtained by PR reflow method was heated and cooled fast during injection to fabricate microlens array. PC and PMMA polymer materials were compared, and it was realized that PMMA showed much better formability due to its lower melting temperature. Injection parameters of pressures and velocities were driven out for injection optimization.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.5
• /
• pp.65-70
• /
• 2000

It is blown that the loudness is one of the most important metrics in assessing the sound quality and a calculation method for loudness has been standardized for steady sounds. In this study, a new loudness model is suggested for dealing with the transient sound for a unified analysis of various practical sounds. A signal processing technique is introduced for this purpose, which is required for the band subdivision and the prediction of band-level change of transient sounds. In addition, models for the post-masking and the temporal integration are adopted in the analysis of the loudness of transient sounds. In order to solve the problem of the conventional loudness model in the pure-tone signal processing, a critical band filter is employed in the analysis, which consists of 47 critical filters having a filter spacing of a half of the critical bandwidth. For testing the effectiveness of the present model, the predicted responses are compared with the experimental data and it is observed that they are in good agreements.