• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.379-382
• /
• 2001

In domestic construction industry, time and cost has been managed separately in most cases. Usually projects are managed focused on cost, so time is not yet managed systematically. Project performance in these managemental situation can not be assessed correctly. This would cause project delay, cost overrun, productivity loss. Therefore it is needed to adopt earned value concept, an approach used in the management and control of project costs and schedules. Using this EV concept through time-cost integration, project can be managed properly based on the consistency, predictability, and reliability of the performance data. This paper proposed time and cost integration process, proper PMT method, and practical performance management model through time and cost integration.

• Journal of Korea Trade
• /
• v.27 no.1
• /
• pp.19-41
• /
• 2023

Purpose - Conventional supply chains (SCs) must identify facilitating roles, such as port or terminal operators, shipping companies, and freight forwarders in executing the various logistical activities that support the organizational strategies of shippers. Meanwhile, supply chain collaborative practices can engender a willingness to share relevant and mutually helpful information. To this end, this study seeks to identify the impact of supply chain integration (SCI) on information sharing (IS) and the operational performance (OP) of Korea's container-shipping industry from the perspective of social capital. Design/methodology - We established the research model for this study based on previous studies. In administering the survey, we obtained 149 valid responses from employees working in liner-shipping companies and freight forwarders in Korea. With the collected questionnaires, the study's hypotheses were tested using SPSS 26.0 and AMOS 26.0 Findings - The results indicate the existence of a mediated relationship where the impact of SCI on OP is mediated by IS. The effect of external integration (EI) on OP is fully mediated by information quality (IQ) and information-sharing content (ISC). Furthermore, EI, IQ and ISC partially mediate the relationship between internal integration (II) and OP. Originality/value - This study expands SCI contexts, where ISC and IQ respectively serve as bridges between EI and OP which has crucial implications for container-shipping companies in terms of improving their performance.

• Korean Journal of Construction Engineering and Management
• /
• v.18 no.3
• /
• pp.42-51
• /
• 2017

Measuring and evaluating project progress and performance are the key element of the construction project success. Construction progress is typically measured quantitatively by evaluating cost and time allocated to the project deliverable, and thus properly integrating cost and time is essential to the project management. This research was performed to propose an alternative methodology to integrate the cost and time and provide a framework for the progress measurement. The researchers developed a typical work process for the cost and schedule planning and also developed an alternative cost-schedule integration method by using progress integration units (PIU). A discipline of a construction phase served as a common level for WBS and CBS integration, so the PIUs'were defined under discipline. A case study project was selected to validate the developed methodology. The result showed the proposed method improved efficiency of cost and time integration. The result also showed the excluding material for the progress measurement purpose significantly reduced the bias of progress measurement.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.4
• /
• pp.535-543
• /
• 2002

Although the generic implementation of aqueous two-phase systems (ATPS) processes for the recovery of biological products has been exploited for several years, this has not resulted in a wide adoption of the technique. The main reasons involve the poor understanding of the mechanism governing phase formation and the behavior of solute partitioning in ATPS processes, the cost of phase forming polymers, and the necessary extended time to optimize the technique. In this review paper, some of the practical disadvantages attributed to ATPS are addressed. The practical approach exploited to design ATPS processes, the application to achieve process integration, the extended use for the recovery of high-value products, and the recent development of new low-cost ATPS, are discussed. It is proposed that the trend of the practical application of ATPS processes for the recovery of biological products will involve the purification of new high-value bioparticulate products with medical applications. Such a trend will give new impetus to the technique, and will draw attention from industries needing to develop new, and improve existing, commercial processes.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.19 no.3
• /
• pp.4462-4471
• /
• 1977

The governing differential equations for the tapered circular arch with fixed ends have been derived, and a numerical procedure for the solution of these equations have been developed. The governing differential equations were solved numerically by an initial value integration procedure and Shooting Methods for boundary value problems. The Rungekutta fourth order integration technique was used. The methods was programmed for a Cyber 73-18 computer System, and all esults were obtained on this computer. A detailed study has been made for a fixed arch with an angle of opening equal to 0.7 radian, and the results are presented in detail in tables and curves. It is hoped that the results presented herein is applied to the deformations of gives point from the tri-axial direction of tapered circular arch with fixed ends, bending moment, and torsional moment, and that at the same time results to be used for archwise structures in steel structure.

• Journal of applied mathematics & informatics
• /
• v.26 no.5_6
• /
• pp.1273-1287
• /
• 2008

In this paper, the numerical integration method for general singularly perturbed two point boundary value problems with mixed boundary conditions of both left and right end boundary layer is presented. The original second order differential equation is replaced by an approximate first order differential equation with a small deviating argument. By using the trapezoidal formula we obtain a three term recurrence relation, which is solved using Thomas Algorithm. To demonstrate the applicability of the method, we have solved four linear (two left and two right end boundary layer) and one nonlinear problems. From the results, it is observed that the present method approximates the exact or the asymptotic expansion solution very well.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.48-53
• /
• 2007

A new way to integrate various geophysical information for evaluation of RQD was developed. In this study, we did not directly define the RQD value where borehole data are not sampled. Instead, we infer the probability of RQD values with prior probability from borehole direct data, and secondary supporting probability from resistivity and seismic tomography data. For the integration, we applied the geostatstical indicator kriging to get prior probability of RQD value, and indicator kriging with soft data to get the supporting probability from resistivity and seismic data. And we finally use the permanence ratio rule to integrate these information. The finally obtained result was also analyzed to fully utilize the probabilistic features. We show the probability of wrongly classifying the RQD evaluation and vice versa. This result may be used for decision making process based on the geophysical exploration.

• 한국IT서비스학회:학술대회논문집
• /
• 2003.05a
• /
• pp.222-229
• /
• 2003

In the process of global transportation, many value chains which have different business process, system and technology level respectively are connected to each other. To obtain end-to-end visibility of transportation, these kind of discrepancy has to be solved appropriately. In this paper, the realization of global visibility is discussed in three point of view such as 'Data Sourcing', 'System integration' and 'System Operation'. First, the data sources of global visibility are described especially from the point of enterprise applications view, and then system integration is presented using various current e-commerce technologies for example XML, EDI and so on. Finally, flexible operation of visibility function is suggested which satisfies different goals of each value chain.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.76-82
• /
• 2004

The solutions of neighboring optimal control are typically obtained using the sweep method or transition matrices. Due to the numerical integration, however, the gain matrix can become infinite as time go to final one in the transition matrices, and the Riccati solution can become infinite when the final time free. To overcome these disadvantages, this paper proposes the pseudospectral Legendre method which is to first discreteize the linear boundary value problem using the global orthogonal polynomial, then transforms into an algebraic equations. Because this method is not necessary to take any integration of transition matrix or Riccati equation, it can be usefully used in real-time operation. Finally, its performance is verified by the numerical example for the space vehicle's orbit transfer.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.100.2-100
• /
• 2001

In this paper, we presented a switching-based control algorithm for improving the speed of response on temperature control of an extruder. We proposed a switching actuating value method in a temperature control of extruder and showed the effect of H$\infty$ control and PID control. Recently, the memoryless feedback control had proposed, which was not only the real time integration element, but also the memory elements. We examined the application of a switching actuating value method to a memoryless feedback, in a unit barrel temperature control of an extruder.