• Macromolecular Research
• /
• v.17 no.9
• /
• pp.658-665
• /
• 2009

This study examined the effects of the sodium salts of aliphatic dicarboxylic acids (DCAs) on the dynamic mechanical properties and morphology of two sets of poly(styrene-co-sodium methacrylate) (MNa) and poly(styrene-co-sodium styrenesulfonate) (SNa) ionomers. When the DCA content was relatively low, the ionic moduli of the MNa and SNa ionomers increased but the matrix and cluster glass transition temperature ($T_g$) did not change significantly. The increasing ionic modulus was almost independent of the type of the ionic groups of the ionomer, and the chain length of DCAs. When a large amount of the sodium succinate (DCA4) was added to the MNa and SNa ionomers, the ionic moduli of the two ionomers increased strongly but the matrix and cluster $T_g's$ increased slightly and significantly, respectively. In the case of sodium hexadecanedioate (DCA 16), DCA 16 increased the ionic moduli of the two ionomers. The addition of DCA16 changed the matrix and cluster $T_g's$ of the MNa ionomer slightly, but decreased the cluster $T_g$ of the SNa ionomer significantly with no change in the matrix $T_g$. In addition, the DCA-containing ionomers showed an X-ray diffraction peak indicating the presence of ordered domains of DC As in the ionomers. Hence, DCA4 acts mainly as a reinforcing filler in MNa and SNa systems. In the case of DCA 16, it initially behaved like a filler but also functioned as a preferential plasticizer for the clusters at high content.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.192-203
• /
• 2012

As a leading nation of ubiquitous technology, South Korea has been promoting u-City pilot projects throughout the country. According to 'Fundamental Construction Law of u-City,' u-City projects are classified into old-town and new-town types. However, most projects have focused only on the new-town type. Pushing forward large-scale land development projects, Korea Land and Housing Corporation (LH Co.) under Ministry of Land Transport and Maritime Affairs (MLTM) has gained a development profit out of the u-City infrastructure and then donated the infrastructure to a local government without making any plan for operations. In the process of u-City pilot projects, old-towns have been relatively ignored and various of unexpected problems have emerged. Building the u-City of an old-town is not easy due to many constraints such as huge initial investment, long validity and verification procedures, lack of useful services for citizens, lack of professional outsourcing methods for business promotion, high operating costs of the integrated control center, inadequate law related, insufficient institutional requirements and so on. This paper introduces a case study on u-City development for an old-town, Ansan City, as a private investment project. The case will help boost u-City projects for old-towns by solving their problems and providing an effective operational mechanism. As the first BTL (Build-Transfer-Lease) project for constructing u-City, 'Broadband Information Network Development Project' of Ansan City will provide a reference model of expanding u-City projects for other cities.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.36-41
• /
• 2011

BIPV system that can alternate building envelope by making materials of PV module should be considered in initial design step for applying PV system efficiently in office building. Mean while, area of the building skin also increases as the number of floors increases, but the valid area that can apply BIPV system in effect decreases relatively. Despite of this weak point, installing BIPV system is still being evaluated as the only measure left that can reduce electronic energy consumption in the building. Therefore, the impact on building energy consumption according to the increase of the number of floors when BIPV system is applied in the building was analyzed. And it will be used as basic information for application of BIPV in office building. Conomic about application of BIPV is interpreted to be secured within the 10 story high. Forover the 11 floors, the methods of increasing the contribution ratio produced by BIPV system through the optimization of install angle and increase in install area of south, high efficiency should be considered. The ways to reduce basic load by integrated design with another renewable energy besides BIPV should be found. Later, the study on the total building energy comsumption with PV generation according to the various type of the basic load and ratio of the width and depth will be performed based on this study.

• Journal of Service Research and Studies
• /
• v.2 no.2
• /
• pp.45-51
• /
• 2012

U-healthcare is real-time monitoring of personal biometric information using by portable devices, home network and information and communication technology based healthcare systems, and fused together automatically to overcome the constraints of time and space are connected with hospitals and doctors. As u-healthcare gives health service in anytime and anywhere, it becomes to be a new type of medical services in patients management and disease prevention. In this paper, recent changes in prevention-oriented care is analyzed in becoming early response for Healthcare Information System by requirements analysis for technology development trend. According to the healthcare system, PACS, OCS, EMR and emergency medical system, U-healthcare is presenting the design of a patient-centered integrated client system. As the relationship between the meaning of the terms is used in the ontology, information models in the system is providing a common vocabulary with various levels of formality. In this paper, we propose an ontology-based system for patient-centered services, including the concept of clustering to clustering the data to define the relationship between these ontologies for more systematic data.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.1 s.33
• /
• pp.125-132
• /
• 2005

Visual programs consist of user interfaces and process logics. Because most visual IDEs(Integrated Development Environment) are utilized by only one developer, many developers can't cooperate simultaneously in one large-scaled visual Program to promote the development efficiency. This paper suggests a co-development environment for visual programs through which developers can cooperate with each other in the type of distribution. Developers can maintain the coincidence and the confidence of cooperation through a communication window and a job controller to process the Priority of the events that developers make in co-development work. Especially in large-sealed visual Program, the suggested environment reduces the burden that developer takes about the heavy development work, and many developers can divide and take the complex and large program modules according to their ability. We hope that the suggested environment can improve the development productivity and effectivity because it can reduce the time and effort for developing user interfaces in visual programs.

• Nuclear Engineering and Technology
• /
• v.47 no.1
• /
• pp.11-25
• /
• 2015

The accident at Japan's Fukushima Daiichi nuclear power plant in March 2011, caused by an earthquake and a subsequent tsunami, resulted in a failure of the power systems that are needed to cool the reactors at the plant. The accident progression in the absence of heat removal systems caused Units 1-3 to undergo fuel melting. Containment pressurization and hydrogen explosions ultimately resulted in the escape of radioactivity from reactor containments into the atmosphere and ocean. Problems in containment venting operation, leakage from primary containment boundary to the reactor building, improper functioning of standby gas treatment system (SGTS), unmitigated hydrogen accumulation in the reactor building were identified as some of the reasons those added-up in the severity of the accident. The Fukushima accident not only initiated worldwide demand for installation of adequate control and mitigation measures to minimize the potential source term to the environment but also advocated assessment of the existing mitigation systems performance behavior under a wide range of postulated accident scenarios. The uncertainty in estimating the released fraction of the radionuclides due to the Fukushima accident also underlined the need for comprehensive understanding of fission product behavior as a function of the thermal hydraulic conditions and the type of gaseous, aqueous, and solid materials available for interaction, e.g., gas components, decontamination paint, aerosols, and water pools. In the light of the Fukushima accident, additional experimental needs identified for hydrogen and fission product issues need to be investigated in an integrated and optimized way. Additionally, as more and more passive safety systems, such as passive autocatalytic recombiners and filtered containment venting systems are being retrofitted in current reactors and also planned for future reactors, identified hydrogen and fission product issues will need to be coupled with the operation of passive safety systems in phenomena oriented and coupled effects experiments. In the present paper, potential hydrogen and fission product issues raised by the Fukushima accident are discussed. The discussion focuses on hydrogen and fission product behavior inside nuclear power plant containments under severe accident conditions. The relevant experimental investigations conducted in the technical scale containment THAI (thermal hydraulics, hydrogen, aerosols, and iodine) test facility (9.2 m high, 3.2 m in diameter, and $60m^3$ volume) are discussed in the light of the Fukushima accident.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.29 no.1
• /
• pp.145-156
• /
• 2016

Objective : We performed a literature review for developing the clinical phenotype evaluation system of atopic dermatitis.Methods : We searched the papers that describe symptoms for atopic dermatitis through Oriental Medicine Advanced Searching Integrated System(OASIS) and Korean Studies Incategoryation Service System(KISS). We looked through all the papers and finally chose 47 papers that are suitable for inclusion. Then, we extracted symptoms from these papers and arranged them in order of frequency and validity through experts' conference.Results : We found 360 papers and chose 47 papers. We decided to include general information of patients, systemic and dermatologic symptoms in evaluation category of atopic dermatitis. Through experts' conference, it was decided that general information has age, sex and body type; Systemic symptoms have 9 items; Dermatologic symptoms have 15 items.Conclusion : To evaluate atopic dermatitis objectively, the standardization of diagnostic tool is needed. Therefore we developed a clinical phenotype evaluation system of atopic dermatitis.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.145-151
• /
• 2006

In conjunction with the rapid progress of IT(information technology) an increasing amount of data are being generated. The amount of new data is so big and the type of new data generated from clients or sensor devices needed to be in ubiquitous environment is so various that it is hard to manage and control them. Especially data to be occurred in ubiquitous environment are generated through PDA(personal digital assistant) smart phone, mobile device or sensor units etc. Therefore, to manage and control them generated from ubiquitous devices for decision making, we can use data warehouse as an integrated storage. A data warehouse integrates and aggregates data of several different DBMS into one DBMS. Also the updated data from source data have to be effectively propagated to the data warehouse. Therefore, in this paper, we proposed a mode) for an exact and efficient data management methodology in new IT paradigm environment, ubiquitous computing environment, to apply updated data on the warehouse to make decision. We also show brief result compared to conventional methodology.

• Molecules and Cells
• /
• v.43 no.7
• /
• pp.607-618
• /
• 2020

microRNAs (miRNAs) are non-coding RNA molecules involved in the regulation of gene expression. miRNAs inhibit gene expression by binding to the 3' untranslated region (UTR) of their target gene. miRNAs can originate from transposable elements (TEs), which comprise approximately half of the eukaryotic genome and one type of TE, called the long terminal repeat (LTR) is found in class of retrotransposons. Amongst the miRNAs derived from LTR, hsa-miR-3681 was chosen and analyzed using bioinformatics tools and experimental analysis. Studies on hsa-miR-3681 have been scarce and this study provides the relative expression analysis of hsa-miR-3681-5p from humans, chimpanzees, crab-eating monkeys, and mice. Luciferase assay for hsa-miR-3681-5p and its target gene SHISA7 supports our hypothesis that the number of miRNA binding sites affects target gene expression. Especially, the variable number tandem repeat (VNTR) and hsa-miR-3681-5p share the binding sites in the 3' UTR of SHISA7, which leads the enhancer function of hsamiR-3681-5p to inhibit the activity of VNTR. In conclusion, hsa-miR-3681-5p acts as a super-enhancer and the enhancer function of hsa-miR-3681-5p acts as a repressor of VNTR activity in the 3' UTR of SHISA7.

• Fire Science and Engineering
• /
• v.30 no.5
• /
• pp.36-45
• /
• 2016

Integral fire shutters are installed indiscriminately, regardless of evacuation. There is always the risk of an accident because integral shutters are applied mainly to corridors, passages, and stairs of schools This study evaluated the problem of integral shutter's entrance, evacuation, construction management, and maintenance control through a fire shutter accident case, including present condition of fire shutter installed at school of Okgil, Bucheon and Dongtan, Hwaseong. The results suggest that emergency lighting or signs for passage be set up to check location of entrance easily and install obstruction sensors at fire shutter to reduce life damage. In addition, the number of efficiency tests of fire shutters should be increased by running a trial test monthly or weekly to maintain the performance of fire shutter. Schools need to install a fire shutter- applied sprinkler at the entire floor.