• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.205-207
• /
• 2003

본 논문에서는 고유전율 기판을 사유하여 성능은 뛰어나며, 사이즈가 작은 통합된 마이크로파 멀티 칩 필터의 설계를 제시하고자 한다. 다양한 유전체 기판은 유전성, 큐 인자, 온도 등에 의해 제품의 요구조건에 EK라 선택 될 수 있다. 이 논문에서는 5.8 GHz 송/수신기 모듈에 소요되며 유전상수(K=130)을 사용하여 대역 여파기(band pass filter)의 설계에 관한 연구를 나타내었다.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.309-315
• /
• 2010

A dual-band dual-polarized microstrip antenna array for an advanced multi-function radio function concept (AMRFC) radar application operating at S and X-bands is proposed. Two stacked planar arrays with three different thin substrates (RT/Duroid 5880 substrates with $\varepsilon_r$=2.2 and three different thicknesses of 0.253 mm, 0.508 mm and 0.762 mm) are integrated to provide simultaneous operation at S band (3~3.3 GHz) and X band (9~11 GHz). To allow similar scan ranges for both bands, the S-band elements are selected as perforated patches to enable the placement of the X-band elements within them. Square patches are used as the radiating elements for the X-band. Good agreement exists between the simulated and the measured results. The measured impedance bandwidth (VSWR$\leq$2) of the prototype array reaches 9.5 % and 25 % for the S- and X-bands, respectively. The measured isolation between the two orthogonal polarizations for both bands is better than 15 dB. The measured cross-polarization level is ${\leq}-21$ dB for the S-band and ${\leq}-20$ dB for the X-band.

• BMB Reports
• /
• 제53권9호
• /
• pp.484-489
• /
• 2020

Epilepsy is a neurological disorder characterized by unpredictable seizures, which are bursts of electrical activity that temporarily affect the brain. Cereblon (CRBN), a DCAFs (DDB1 and CUL4-associated factors), is a well-established protein associated with human mental retardation. Being a substrate receptor of the cullin-RING E3 ubiquitin ligase (CRL) 4 complex, CRBN mediates ubiquitination of several substrates and conducts multiple biological processes. In the central nervous system, the large-conductance Ca²⁺-activated K⁺ (BK_Ca) channel, which is the substrate of CRBN, is an important regulator of epilepsy. Despite the functional role and importance of CRBN in the brain, direct injection of pentylenetetrazole (PTZ) to induce seizures in CRBN knock-out mice has not been challenged. In this study, we investigated the effect of PTZ in CRBN knock-out mice. Here, we demonstrate that, compared with WT mice, CRBN knock-out mice do not show the intensification of seizures by PTZ induction. Moreover, electroencephalography recordings were also performed in the brains of both WT and CRBN knockout mice to identify the absence of significant differences in the pattern of seizure activities. Consistently, immunoblot analysis for validating the protein level of the CRL4 complex containing CRBN (CRL4^Crbn) in the mouse brain was carried out. Taken together, we found that the deficiency of CRBN does not affect PTZ-induced seizure.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.333-333
• /
• 2006

We synthesized two novel polynorbornene derivatives, chiral poly(norbornene acid methyl ester) (C-PNME) and racemic poly(norbornene acid n-butyl ester) (R-PNME), which are potential low dielectric constant materials for applications in advanced microelectronic and display devices. Thin films of these polymers deposited on substrates were investigated by structural analyses using synchrotron grazing incidence X-ray scattering, specular reflectivity and ellipsometry. These analyses provided important information on the structure, electron density gradient across film thickness, chain orientation, refractive index and thermal expansion of the polymers in substrate-supported thin films. The structural characteristics and properties of the thin films were first dependent on the polymer chain' tacticity and further influenced by film thickness and thermal annealing.

• 한국세라믹학회지
• /
• 제40권8호
• /
• pp.715-719
• /
• 2003

The Aerosol Deposition (AD) process will be proposed as a new fabrication technology for the integrated RF modules. $\alpha$-A1$_2$O$_3$ thick films were successfully grown on glass and Al substrates at room temperature by the AD process. Relative dielectric permittivity and loss tangent of the $Al_2$O$_3$ thick films on Al showed 9.5 and 0.005, respectively. To form microstrip lines on aerosol-deposited A1903 thick films, copper electroplating and lithography processes were employed, and the square-type cross section with sharp edges could be obtained. Low-pass LC filters with 10 GHz cutoff frequency were simulated by an electromagnetic analysis, exhibiting the validity of the AD process as a fabrication technology f3r integrated RF modules.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.3025-3029
• /
• 2014

To realize copper-based electrode materials for printed electronics applications, it is necessary to improve the adhesion strength between conductive lines and the substrate. Here, we report the preparation of Cu pastes using (3-glycidoxypropyl) trimethoxysilane (GPTMS) prepolymer as an adhesion promoter (AP). The Cu pastes were screen-printed on glass and polyimide (PI) substrates and sintered at high temperatures (> $250^{\circ}C$) under a formic acid/$N_2$ environment. According to the adhesion strengths and electrical conductivities of the sintered Cu films, the optimized Cu paste was composed of 1.0 wt % GPTMS prepolymer, 83.6 wt % Cu powder and 15.4 wt % vehicle. After sintering at $400^{\circ}C$ on a glass substrate and $275^{\circ}C$ on a PI substrate, the Cu films showed the sheet resistances of $10.0m{\Omega}/sq$. and $5.2m{\Omega}/sq$., respectively. Furthermore, the sintered Cu films exhibit excellent adhesion properties according to the results of the ASTM-D3359 standard test.

• 한국정보통신학회논문지
• /
• 제5권1호
• /
• pp.157-165
• /
• 2001

집적 쇼트키 논리 게이트에서 전압 스윙을 크게 하기 위해서 백금 실리사이드 쇼트키 접합의 전기직 특성을 분석하였고, 이 접합에서 프로그램으로 특성을 시뮬레이션 하였다. 분석특성 특성을 위한 시뮬레이션 프로그램은 제조 공정용 SUPREM V와 모델링용 Matlab, 소자 구조용의 Medichi 툴이다. 시뮬레이션 특성을 위한 입력 파라미터는 소자 제작 공정의 공정 단계와 동일한 조건으로 하였다. 분석적인 전기적인 특성들은 순방향 바이어스에서 턴-온 전압, 포화 전류, 이상인자이고, 역방향 바이어스에서 항복 전압을 실제 특성과 시뮬레이션 특성 사이의 결과를 보였다. 결과로써 순방향 턴-온 전압, 역방향 항복전압, 장벽 높이는 기판의 증가된 농도의 변화에 따라 감소되었지만, 포화전류와 이상인자는 증가되었다.

• 전자공학회논문지
• /
• 제52권2호
• /
• pp.55-69
• /
• 2015

근접 결합 급전 방식을 이용한 마이크로스트립 패치 안테나의 급전 선로에 임피던스 정합기를 집적하여 대역폭을 확장하는 방법에 대하여 연구하였다. 여러 가지 유전상수와 두께를 가지는 기판을 사용한 근접 결합 급전을 이용한 패치 안테나에 임피던스 정합기를 집적한 경우와 임피던스 정합기를 사용하지 않은 경우의 대역폭과 방사특성을 비교하였다. 임피던스 정합기를 사용한 경우가 사용하지 않은 경우에 비하여 방사특성의 저하 없이 대역폭이 크게 증가함을 볼 수 있었다.

• ETRI Journal
• /
• 제22권1호
• /
• pp.38-46
• /
• 2000

The extraction of model parameters for embedded passive components is crucial for designing and characterizing the performance of multichip module (MCM) substrates. In this paper, a method for optimizing the extraction of these parameters using genetic algorithms is presented. The results of this method are compared with optimization using the Levenberg-Marquardt (LM) algorithm used in the HSPICE circuit modeling tool. A set of integrated resistor structures are fabricated, and their scattering parameters are measured for a range of frequencies from 45 MHz to 5 GHz. Optimal equivalent circuit models for these structures are derived from the s-parameter measurements using each algorithm. Predicted s-parameters for the optimized equivalent circuit are then obtained from HSPICE. The difference between the measured and predicted s-parameters in the frequency range of interest is used as a measure of the accuracy of the two optimization algorithms. It is determined that the LM method is extremely dependent upon the initial starting point of the parameter search and is thus prone to become trapped in local minima. This drawback is alleviated and the accuracy of the parameter values obtained is improved using genetic algorithms.

• 생물환경조절학회지
• /
• 제19권1호
• /
• pp.12-18
• /
• 2010

토마토를 대상으로 암면과 코이어를 사용한 자루재배에서 일사량제어와 배액전극제어법의 급액제어 능력을 실험한 결과, 배지 종류에 관계없이 일사량제어법에 비해 배액전극제어법에서 배지함수량과 배액량이 안정 적이었다. 총수확량과 상품과량은 배액전극제어법에서 많았으며, 동일한 급액제어 처리 안에서는 배지간 차이는 없었다. 당도는 급액제어 방법의 차이보다는 배지의 종류에 영향을 많이 받았다. 배액전극제어법은 펄라이트뿐만 아니라 암면과 코이어배지에서도 범용적으로 일사량제어법에 비해 유리한 것으로 나타났다.