• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.45-48
• /
• 2009

This study evaluated the influence of temperature on the PV module surface on power output characteristics, especially for an amorphous transparent thin-film PV module which was applied to a full-scale mock-up model as building integrated photovoltaic system. The tested mock-up consisted of various slopes of PV module, facing to the south. The annual average temperature of the module installed with the slope of $30^{\circ}$ revealed $43.1^{\circ}C$, resulting in $7^{\circ}C$ higher than that measured in PV modules with the slope of $0^{\circ}$and $90^{\circ}$ did. This $30^{\circ}$ inclined PV module also showed the highest power output of 28.5W (measured at 2 PM) than other two modules having the power output of 20.4W and 14.9W in the same time for $0^{\circ}$ and $90^{\circ}$ in the slope, respectively. In case of the $30^{\circ}$ inclined PV module, it exhibited very uniform distribution of power output generation even under the higher temperature on the module surface. Consequently, the surface temperature of the PV module analyzed in this study resulted in 0.22% reduction in power output in every $1^{\circ}C$ increase of the module surface temperature.

• ETRI Journal
• /
• 제38권4호
• /
• pp.645-653
• /
• 2016

This paper demonstrates the performance of a metal-substrate power module with multiple fabricated chips for a high current electrical application, and evaluates the proposed module using a 1.5-kW sinusoidal brushless direct current (BLDC) motor. Specifically, the power module has a hybrid structure employing a single-layer heat-sink extensible metal board (Al board). A fabricated motor driver IC and trench gate DMOSFET (TDMOSFET) are implemented on the Al board, and the proper heat-sink size was designed under the operating conditions. The fabricated motor driver IC mainly operates as a speed controller under various load conditions, and as a multi-phase gate driver using an N-ch silicon MOSFET high-side drive scheme. A fabricated power TDMOSFET is also included in the fabricated power module for three-phase inverter operation. Using this proposed module, a BLDC motor is operated and evaluated under various pulse load tests, and our module is compared with a commercial MOSFET module in terms of the system efficiency and input current.

• 한국항행학회논문지
• /
• 제18권5호
• /
• pp.437-444
• /
• 2014

모듈통합형 항공전자시스템은 연방형의 LRU (line replaceable unit)의 기능을 하나의 LRM (line replaceable module)에서 제공하고, 하나의 cabinet에 여러 개의 LRM을 탑재한다. IMA core 시스템의 VPM (video processing module)은 LRM으로써 ARINC 818 ADVB (avionics digital video bus)의 bridge 및 gateway 역할을 한다. ARINC 818은 광 대역폭, 적은 지연시간, 비 압축 디지털영상 전송을 위해 개발된 규격이다. VPM의 FPGA IP core는 ARINC 818 to DVI 또는 DVI to ARINC 818 처리와 video decoder, overlay 기능을 가진다. 본 논문에서는 VPM 하드웨어 구현에 대해 다루고, VPM 기능과 IP core 성능 검증 결과를 보인다.

• 한국전자거래학회지
• /
• 제7권3호
• /
• pp.61-73
• /
• 2002

Product catalog information is the most important factor to make customers purchase the product for various B2B or B2C businesses provided on the Internet. As catalog information differs from company by company, it cannot provide common criteria standard to customers to make decisions. Therefore, it is necessary to develop a platform independent system, which integrates incompatible data from each company' catalogs and manages its database. This paper describes the integrated E-catalog system made up DB module, catalog management module, and interface module. This system allows customers to view standardized product catalog information from different companies with real -time updates, and also provides extensibility, flexibility, and interoperability for the effective E-Business management.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1104-1105
• /
• 2008

This paper presents the assesment of experimented data and estimated data for electrical and thermal performance evaluation of building integrated photovoltaic(BIPV) system of cold facade type. BIPV module is used to estimate the dependence of module temperature on irradiance, ambient temperature and indoor temperature. The module temperature of no free ventilated facade PV system is higher than cold facade PV system about 13.4$^{\circ}C$. By the results on simulation, the reduction of electrical power loss is 9.57% into cold facade according to free ventilation. The annual averaged PR of BIPV system into cold facade is about 73.1%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1120-1121
• /
• 2008

This paper is proposed cooling system of BIPV(Building Integrated Photovoltaic) by micro-controller. The output power of PV generation system is not systematically tracked and influenced by various factors; solar irradiance, solar cell temperature. The temperature of solar module should be minimized to increase electrical output. Therefore, it is proposed that micro-controller cools to decrease temperature of solar module using thermoelement. The validity of this paper is proved by comparing solar module temperature of cooling system and un-cooling system.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.105-106
• /
• 2008

In korea, PV business has been growing fast since 2000. There are many ways to build PV System. Among them, BIPV(Building Integrated Photovoltaic) System using PV Modules as external wall has been carried out research on and invested much. Thus I will suggest another way to apply the BIPV System. This System is Eco System designed to consume little energy working the blind by the power that the BIPV System generates. I will show you how to make and apply this BIPV System.

• Genomics & Informatics
• /
• 제9권4호
• /
• pp.194-196
• /
• 2011

Promoter prediction is a very important problem and is closely related to the main problems of bioinformatics such as the construction of gene regulatory networks and gene function annotation. In this context, we developed an integrated promoter prediction program using hybrid methods, PromoterWizard, which can be employed to detect the core promoter region and the transcription start site (TSS) in vertebrate genomic DNA sequences, an issue of obvious importance for genome annotation efforts. PromoterWizard consists of three main modules and two auxiliary modules. The three main modules include CDRM (Composite Dependency Reflecting Model) module, SVM (Support Vector Machine) module, and ICM (Interpolated Context Model) module. The two auxiliary modules are CpG Island Detector and GCPlot that may contribute to improving the predictive accuracy of the three main modules and facilitating human curator to decide on the final annotation.

• ETRI Journal
• /
• 제28권5호
• /
• pp.648-651
• /
• 2006

In this letter we present a right-angle-bent coplanar waveguide (CPW) which we developed for the application of the driver amplifier-integrated (DAI) 40 Gbps traveling wave electroabsorption modulated laser module. The developed CPW realized parallel progression of the radio frequency (RF) and light using a dielectric overlay structure and wedge bonding on the bending section. The measured $S_{11}$ and $S_{21}$ of the developed CPW were kept below-10 dB up to 35 GHz and -3 dB up to 43 GHz, respectively. These measured results of the CPW were in good agreement with the simulation results and demonstrated the applicability of the CPW to the 40 Gbps communication module.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.75-76
• /
• 2006

A new broadcasting standard for Digital Multimedia Broadcasting(DMB) has been announced in Korea to provide audio, video, and data broadcasting services. There exist two types of DMB; terrestrial DMB and satellite DMB. And in order to service DMB on the single system, the integration of RF module is required. In this paper, we describe an integrated RF tuner module that can receive T-DMB and S-DMB at the same time, which includes an L-band down-converter, a Band III tuner, and a S-DMB tuner.