• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.198-202
• /
• 2003

Tunable laser diode module with 50GHz-spacing internal wavelength locker was developed. Angle tilting dependency on FSR and peak wavelength shift and the proper initial tilting angle was calculated. By tilting the etalon, the response of the internal wavelength locker module was tuned. As a result, the fabricated internal wavelength locker module showed good performance over 62 channels.

• 센서학회지
• /
• 제22권1호
• /
• pp.65-70
• /
• 2013

The integrated sensor module of vehicle combines the functions of rain sensor, auto defog sensor, and sun angle sensor into a single module. These functions originally were applied to work separatively. This integrated sensor module should meet the each performance which appears from the individual modules up to the same level or higher. Therefore, it is important to verify the stability and the accuracy considering the characteristics of the integrated sensor module according to various situations. For the verification, we need to use the actual data of integrated sensor module measured but, a lot of time and money is needed to collect data measured under various circumstances when operating. Thus, through the development of this simulator for the control of the integrated sensor module, we can use it effectively for the initial verification of integrated sensor module by implementing the various situations. In this paper, the simulator for controlling the integrated sensor module which combines vision-based rain sensor, auto defog sensor, auto light sensor, and sun angle sensor has been developed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.403-408
• /
• 2007

According as diesel automobile are produced, reduce noise and vibration that is occurred by characteristic of diesel engine, and need engine room layout optimization and research for light weight of parts. Balance Shaft Module is module parts for vehicles engine to improve performance and efficiency of engine and reduce noise and vibration. These days, an oil pump integrated balance shaft module and an oil sump integrated balance shaft module is on the rising for optimizing of engine room. In this study, produced prototype of oil pump integrated type balance shaft module, and achieved dynamic characteristic test about experimental modal analysis and noise/vibration of balance shaft module.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.352-361
• /
• 1998

The post-processing modules are parts of an integrated system for reinforced concrete structures. This modules are composed of two modules: member design module and calculation report module. The purpose of this paper is to develope modules that increase efficiency and usefulness of an integrated system used reinforced concrete structures design. The development of post-processing modules is necessary for user to design reinforced concrete structures conveniently and quickly. This modules are connected with central database for the benefit of storing amount of input/output data and being used system with little effort. Post-processing modules used Object-Oriented concepts and techniques include identity, classification, polymorphism, and inheritance. Member design module automatically converts no good members into satisfied members by changing section size or reinforcement bar arrangement. This module can be operated both independent member design modules with user input and a part of integrated system with database input. If user operates member design module, calculation report module is created automatically.

• 한국컴퓨터정보학회논문지
• /
• 제22권6호
• /
• pp.79-86
• /
• 2017

In this paper, we implement a common module that can integrate multiple biometric information for integrated patient monitoring system. Conventional biomedical instruments have many devices attached to each patient, making it difficult to monitor abnormality signs of many patients in real time. In this paper, we propose a module for an integrated monitoring system that can perform centralized monitoring using a common module that integrates multiple measurement devices. A protocol for sending and receiving packets between the measuring device and the common module is designed, and the packets transmitted through the network are stored and managed through the integrated monitoring system and provide information to various users such as medical staff. The results of this study are expected to contribute to the management of patients and efficient medical services in hospitals.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.89-92
• /
• 1997

The objective of this paper is to provide an alternative framework for the integration of process planning and scheduling in cellular manufacturing. The concept of an integrated cellular manufacturing system is defined and the system architecture is presented. In an integrated cellular manufacturing system, there are three modules : the process planning module, the manufacturing-cell design module, and the cell-scheduling module. For each module, the tasks and their activities are explained.

• 디지털콘텐츠학회 논문지
• /
• 제17권3호
• /
• pp.173-180
• /
• 2016

본 논문에서는 종래의 보안관리 시스템과 송수신 모듈의 단점을 개선하기 위해 유무선 복합기능의 송수신 모듈과 이를 사용한 신뢰성 높은 실시간 보안시스템을 제안한다. 제안하는 복합 송수신모듈은 RF 제어 회로와 무선 송수신 회로로 구성된다. RF제어회로는 저전력 협대역 RF 송수신 시스템으로서 마이크로프로세서의 레지스터에 저장되어 있는 특정 주파수 대역을 불러올 수 있고, 임의로 값을 쓰거나 읽어 들여 임의 주파수의 송신출력을 사용자가 제어할 수 있도록 설계한다. RF 송신 모듈의 동작을 위한 구동 알고리듬을 제시하고 설계한 복합 송수신 모듈과 동작 알고리듬을 시작품으로 구현하여 실험을 통해 유효성을 확인한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1673-1675
• /
• 2004

The design, modeling and measurement of RF switch module for GSM applications is presented in this paper. RF switch module is constructed using a LTCC multi-layer switching circuit and integrated low pass filter. Insertion and return loss of the low pass filter were designed less than 0.3 dB and better than 12.7 dB at 900 MHz. The RF switch module contained 10 embedded passives and 3 surface mount components integrated on $4.6{\times}4.8{\times}1.2$ mm, 6-layer multi-layer integrated circuit. The insertion loss of switch module was measured at 900 MHz was 11 dB.

• 한국전자파학회논문지
• /
• 제19권11호
• /
• pp.1287-1293
• /
• 2008

4중 대역의 안테나 스위치 모듈을 개발하였다. 단말기의 front-end 단에서 LTCC 형태의 저역 통과 필터, 다이오드 및 수동 부품들로 구현되는 스위치 부분을 대신하여 수동 집적 회로와 트랜지스터 스위치로 집적화한 것이다. 필터의 수동 소자 및 정합 회로를 통합 구성하여 크기 면에서도 소형화가 가능하고, 가격 경쟁력에서도 우위를 점할 수 있다. 제안하는 안테나 스위치 모듈의 크기는 $5{\times}5\;mm$이고, 두께는 0.8 mm로 제작되었다. 각 대역의 삽입 손실은 평균적으로 1.0 dB이며, 반사 손실은 GSM/EGSM 대역에서 15.1 dB, DCS/PCS 대역에서 19 dB이다.

• 한국컴퓨터정보학회논문지
• /
• 제11권5호
• /
• pp.267-272
• /
• 2006

본 논문에서는 레이더에 사용할 수 있는 집적화, 소형화된 Ka-band용 송수신 모듈을 설계 및 제작하였다. 캐비티 형태의 공진기 및 MMIC의 VCO, 전력증폭기, 저잡음 증폭기, 주파수 혼합기와 직접 설계, 제작한 수동 소자들을 캐리어에 장착시키고, 이 캐리어들을 직접 송수신 모듈에 연결하여 결과적으로 출력 21dBm, 잡음지수 5dB까지의 성능을 보이면서 $50cm^*50cm^*20cm$의 소형화된 크기로 설계하였다. 개발된 FMCW 송수신 모듈을 이용하여 60m 이상 떨어져 있는 목표물을 탐지할 수 있는 비트 신호와 하늘 및 땅에 대한 특성을 분석할 수 있는 라디오미터 신호를 측정하였다. MMIC로 구성된 Ka-band의 송수신 모듈은 레이다와 라디오미터용으로 우수한 성능을 가짐을 확인할 수 있었다.