• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.2
• /
• pp.170-183
• /
• 2013

This paper gives an overview of fractional-N phase-locked loops (PLLs) with practical design perspectives focusing on a ${\Delta}{\Sigma}$ modulation technique and a finite-impulse response (FIR) filtering method. Spur generation and nonlinearity issues in the ${\Delta}{\Sigma}$ fractional-N PLLs are discussed with simulation and hardware results. High-order ${\Delta}{\Sigma}$ modulation with FIR-embedded filtering is considered for low noise frequency generation. Also, various architectures of finite-modulo fractional-N PLLs are reviewed for alternative low cost design, and the FIR filtering technique is shown to be useful for spur reduction in the finite-modulo fractional-N PLL design.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.2
• /
• pp.1-11
• /
• 1997

We developed a base station modulator ASIC for CDMA digital cellular system. In CDMA digital cellular system, the modulation is performed by convolutional encoding and QPSK with spread spectrum. The function blocks of base station modulator are CRC, convolutional encoder, interleaver pseudo-moise scrambler, power control bit puncturing, walsh cover, QPSK, gain controller, combiner and multiplexer. Each function block was designed by the logic synthesis of VHDL codes. The VHDL code was described at register transfer level and the size of code is about 8,000 lines. The circuit simulation and logic simulation were performed by COMPASS tools. The chip (ES-C2212B CMB) contains 25,205 gates and 3 Kbit SRAM, and its chip size is 5.25 mm * 5,45 mm in 0.8 mm CMOS cell-based design technology. It is packaged in 68 pin PLCC and the power dissipation at 10MHz is 300 mW at 5V. The ASIC has been fully tested and successfully working on the CDMA base station system.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.378-388
• /
• 2015

This paper proposes a pulse width modulation (PWM)-based sliding mode controller (SMC) for a full-bridge DC-DC converter that can eliminate static output voltage error. Hysteretic SMC in DC-DC converter does not have a fixed switching frequency, and applying hysteretic SMC to full-bridge converters is difficult. Fixed-frequency SMC, which is also called PWM-based SMC, based on equivalent control overcomes these shortcomings. However, the controller order reduction in equivalent control in PWM-based SMC causes static output voltage error. To resolve this issue, an integral item is added to the PWM-based SMC. Sliding mode coefficients are designed by applying a standard second-order system to the sliding mode surface. The effect of adding an integral item on the controller is analyzed, and an integral coefficient design method is proposed. Experiment results on a three-level full-bridge DC-DC converter verify the control scheme and design method proposed in this paper.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.12
• /
• pp.1791-1801
• /
• 2013

Diketopiperazine is produced by various organisms, including bacteria, fungi, and animals, and has been suggested as a novel signal molecule involved in the modulation of genes with various biological functions. Vibrio vulnificus, which causes septicemia in humans, produces cyclo($\small{L}$-phenylalanine-$\small{L}$-proline) (cFP). To understand the biological roles of cFP, the effect of the compound on the expression of the total mRNA in V. vulnificus was assessed by next-generation sequencing. Based on the transcriptomic analysis, we classified the cFP-regulated genes into functional categories and clustered them according to the expression patterns resulted from treatment with cFP. From a total of 4,673 genes, excepting the genes encoding tRNA in V. vulnificus, 356 genes were up-regulated and 602 genes were down-regulated with an RPKM (reads per kilobase per million) value above 3. The genes most highly induced by cFP comprised those associated with the transport and metabolism of inorganic molecules, particularly iron. The genes negatively regulated by cFP included those associated with energy production and conversion, as well as carbohydrate metabolism. Noticeably, numerous genes related with biofilm formation were modulated by cFP. We demonstrated that cFP interferes significantly with the biofilm formation of V. vulnificus.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.3
• /
• pp.228-238
• /
• 2002

This paper presents a digital controller of the electronic ballast using high frequency modulation method for the metal halide lamp. The proposed controller includes the control algorithm for soft starting, no load protection, over current protection and power control. The proposed digital controller, moreover, has the high frequency modulation scheme and the tracking algorithm to avoid acoustic resonance phenomena. For the math production with the low cost using the ASICs (Application Specific Integrated Circuit), the proposed digital controller has been designed with the FPGAs(Field Programmable Gate array) only, without any microprocessor. In this paper, the detail digital control algorithms are described and the experimental results of prototype 150w metal halide electronic ballast are presented.

• 한국초전도학회:학술대회논문집
• /
• v.13
• /
• pp.57-57
• /
• 2003

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.22-27
• /
• 1996

A digital logic demodulator for binary FSK signals is presented. The operation is based on the quadricorrelator which is known as an ideal frequency detector. The demodulator is especially suitable for high-speed application, and it can be easily implemented in integrated circuit. Computer simulation results show that the performance of the receiver with digital demodulator converges to that of analog quadricorrelator receiver as the number of mixing axes is increased and the optimum bandwidth depending on a modulation index is slightly wider than that of analog demodulator.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.735-738
• /
• 2002

This paper a new simple PWM (Pulse Width Modulation) signal generation based on modified relaxation oscillator is introduced. Its advantages of the proposed principle are that the precise PWM signal can be easily achieved with a high frequency range up to several megahertz and a low-voltage power supply. The proposed circuit can accept either voltage or current modulating signal. It is very suitable for developing into Integrated Circuits (ICs) form in communication applications. The simulation and experimental results are also depicted, they shown good agreement with theoretical anticipation.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.709-712
• /
• 1998

A new ZVS-CV PWM converter with power factor correction (PFC) function is presented in this paper. The new topology is a integration of a boost converter and a ZVS-CV topology in a single power conversion stage. The new converter can be regulated in pulse-width modulation (PWM) by universal integrated control circuits. Some design considerations are given in detail. A laboratory prototype has been implemented to show the feasibility of the approach and the analysis.

• Journal of the Optical Society of Korea
• /
• v.1 no.1
• /
• pp.44-47
• /
• 1997

The integration of a GaAs/AlGaAs multi-quantum well electroabsorption modulator and a tapered waveguide vertical direction optical interconnect has been performed without the complicated regrowth process. Zn impurity-induced layer disordering of MQW layer is used to achieve the energy transfer between SQW and MQW regions. Light coupled into a SQW region was transferred to an MQW region and an intensity modulation of 10 dB extinction ratio was demonstrated.