• 한국CDE학회논문집
• /
• 제9권3호
• /
• pp.260-265
• /
• 2004

This paper proposed a Web-based training service for product data management by supporting an integrated product data management system, various technical documents. and efficient communication systems. It also supports a general product development process and a consistent product data model that enable participants to experience management of consistent product information during the product development life cycle. The Web based environment of the service also provides participants with a collaborative workplace with other participants and a Web portal for all the components of the service.

• 한국대기환경학회지
• /
• 제34권2호
• /
• pp.281-293
• /
• 2018

As the public interest in environmental issues increased, the "Act On The Integrated Control Of Pollutant-Discharging Facility" was enacted. Through the integrated environmental pollution prevention act in which 19 industries with large environmental impacts are sequentially applied, pollutants can be managed in a medium-integrated manner and integrated permission of the business unit is possible and BAT can be applied to enable a scientific and proactive environmental management system. This study analyzed the overview of BAT reference documents(BREF), BAT setting procedure and method, and then suggested the development direction BAT and BAT-AEL monitoring method of a Electricity and Steam production facility.

• 한국대기환경학회지
• /
• 제34권1호
• /
• pp.144-155
• /
• 2018

As the public interest in environmental issues increased, the "Act On The Integrated Control Of Pollutant-Discharging Facility" was enacted. Through the integrated environmental pollution prevention act in which 19 industries with large environmental impacts are sequentially applied, pollutants can be managed in a medium-integrated manner and integrated permission of the business unit is possible and BAT can be applied to enable a scientific and proactive environmental management system. In addition, if the facility with BAT works normally, the pollutant emission is offered with the range of lower limit to upper limit. This study analyzed the overview of Best Available Techniques-Associated Emission Levels (BAT-AEL), and its setting procedure and method, and then suggested the BAT-AEL of a waste incineration facility. In comparative analysis on Emission Limit Values (ELVs) of EU, this study tries to propose improvement matters and development directions if the relevant standard is revised.

• 한국콘텐츠학회논문지
• /
• 제11권5호
• /
• pp.93-103
• /
• 2011

현재, 도서관시스템의 소프트웨어 사용 방식은 클라이언트/서버 및 ASP 방식으로 서비스를 제공함으로써 하드웨어 및 소프트웨어 구매비, 설치 및 배포, Customization, Upgrade, 문제점 관리, 라이센스의 고비용 등 소프트웨어 전반에 걸쳐 관리가 힘들고 고비용의 문제점이 있다. 이러한 문제점을 해결하기 위해 SaaS 기반의 전자도서관시스템에서는 멀티테넌트 환경(SaaS 성숙도 레벨 3이상)에서 구현이 가능한 핵심요소들을 개발하였다. 그러므로 초기 투자비용이 거의 없고, 쉽고, 간편하며, 저비용 IT 서비스가 가능한 SaaS 기반의 소프트웨어 온-디멘드 방식의 서비스 모델로 시스템을 구현하였다.

• 전자공학회논문지CI
• /
• 제47권6호
• /
• pp.19-27
• /
• 2010

클라우드 컴퓨팅 서비스 환경에서 인증 및 접근 제어와 같은 여러 보안 이슈가 발생하고 있다. 특히, 클라우드 컴퓨팅 환경에서 다양한 자원에 접속을 할 경우, 통합적으로 관리 및 제어가 가능한 인증 및 접근제어 모델이 필요하다. 이를 해결하기 위해서, 본 논문에서는 클라우드 컴퓨팅 환경에서 상황인식 기술과 통합인증 기술, 접근제어 기술, OSGi 서비스 플랫폼 기술을 접목하여, 상황인식 기반의 통합 인증(SSO) 및 접근제어 시스템을 제안한다. 또한 제안 시스템을 설계 및 구현함으로써, 클라우드 컴퓨팅 환경에서 상황에 따른 다양한 Multi Fact기반의 통합인증을 통하여 유연하고, 편리한 보안 시스템을 검증하였다. 이를 통하여 클라우드 컴퓨팅 환경에서 사용자 상황에 따라, 유연하고, 안전한 무중단 보안 서비스를 제공할 수 있음을 확인할 수 있었다.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.195-199
• /
• 2015

Many conventional management methods have emphasized the minimization of required resources along the supply chain. Accordingly, this paper presents a proposed method called the Virtual Design and Construction (VDC)-aided system. It is based on object-oriented resource control, in order to accomplish a feed-forward control monitoring supply chain logistics. The system is supported by two main parts: (1) IT-based Technologies; and (2) VDC Models. They enable the system to convey proactive information from the detection technology to its linked visualization. The paper includes a field study as the system's pre-test: the Scaffolding Works in a LNG Mega Project. The study demonstrates a system of real-time productivity monitoring by use of the RFIDbased Mobile Information Hub. The on-line 'productivity dashboard' provides an opportunity to display the continuing processes for each work-package. This research project offers the observed opportunities created by the developed system. Future work will entail research experiments aimed towards system validation.

• 한국환경복원기술학회지
• /
• 제11권2호
• /
• pp.104-113
• /
• 2008

Due to the increasing needs of land supply, green space has been continuously encroached and resulted considerable naturality deterioration in Korea. In order to overcome the problem, it is necessary to introduce a integrated system for managing the quantitative and qualitative aspects of green space. With this regard, this study is to derive the feasibility for the adoption of the 'no net loss of green' policy to Korea from German and Japanese experiences. In Germany, natural resources are protected and inevitable damages were compensated through the adoption of 'interference regulation'. In Japanese case, future green space and artificial green foundation should be specified on the green basic plan which pursuit the improvement of naturality. In order to introduce the 'no net loss of green' policy to Korea, not only awareness raising on integrated green management system but also amendment of related regulations are needed. In detail, restoration and recovery on the damaged nature should be clearly elucidated and indicators to evaluate the current naturality and calculation methods for the restoration should be developed. Should this integrated green management system introduced, deterioration of naturality by development activities could be minimized thorough the adoption of land development permission criteria and green space management methodologies.

• 환경영향평가
• /
• 제22권2호
• /
• pp.183-194
• /
• 2013

The Ministry of Environment, Ministry of Agriculture, Fishery and Forestry, and Ministry of Construction, Transportation and Maritime Affairs are in charge of livestock manure management. There are national statistics regarding the livestock industry such as the National Pollution Source Survey, Livestock Statistic Survey, and Livestock-breeding Trend Survey. The current statistical data are focused on the scale of livestock breeding and the production of livestock manure using these data, but it is difficult to establish database due to lack of information. In order to plan relevant policies including management of livestock manure, the government established database systems such as the integrated information system of livestock manure, the integrated system of national infectious animal-disease prevention, and the Sae-ol public administrative system. We have tried to suggest improvements for the comprehensive environmental information system of livestock manure management by detecting problems in each level of the livestock manure life-cycle, making use of the existing systems, and considering the electronic transfer system of livestock manure. The services and functions of this comprehensive system include information of livestock farmers, the production, collection, transportation, and treatment of livestock manure, the area of agricultural land used for livestock manure, the report of approval and results on livestock manure products, management of statistical information, management of civil affairs, and relevant mobile application services. The system is made up of three processes: first, establishment of GIS-based management database of livestock manure; second, establishment of a history management system for livestock manure transactions; and third, development of a water quality assessment system.

• 대한기계학회논문집
• /
• 제17권9호
• /
• pp.2264-2270
• /
• 1993

This paper describes the development of a tool management system of milling operations in CIM environment. The system consists of modules for tool room management, tool purchasing, tool magazine management and tool selection. The tool selection is interactively performed by the aid of the graphic icons of milling cutter. The so-called UNICODE tool coding system is also developed to unify different kinds of codes from different tool manufacturers. The system runs on IBM PC AT.

• 대한방사선기술학회지:방사선기술과학
• /
• 제28권3호
• /
• pp.193-201
• /
• 2005

최근의 정보통신기술(ICT)은 관련기술과의 융합으로 모든 시스템을 통합하는 형태로 발전하고 있다. 이런 시대의 흐름과 마찬가지로 의료산업은 근래에 많은 발전 및 응용에 관한 연구가 활발히 진행되고 있다. 의료정보시스템도 의료 IT의 정보시스템들이 통합되는 방향으로 급변하게 진화해가고 있으며, 앞으로도 그 가속도는 더 할 전망이다. 특히 유비쿼터스 환경에서의 의료정보산업은 최근에 큰 전환기를 맞고 있다. 특히 정부의 정보통신부 IT839 전략으로 핵심기술 및 신규 서비스로 다양한 응용서비스 시범사업과 관련 요소기술 개발이 활발히 진행되고 있다. 따라서 본 논문에서는 의료정보시스템의 최근 동향을 업계 및 시스템적으로 분석하고, 유비쿼터스 컴퓨팅 환경에서의 미래의 통합의료정보시스템의 응용에 대한 발전 방향을 제시하고자 한다. 그리고 국가 주도의 산업성장으로서 유비쿼터스 환경의 구축을 위한 병원 응용 시스템 구축을 제시하며, USN(Ubiquitous Sensor Network) 환경의 IT응용 서비스가 실용화하고 있는 실정에서 통합의료정보를 위한 환자 진료의 서비스 강화를 도모하도록 통합의료정보시스템을 제안 및 설계하였다. 그리고 병원의 실제 EMR, HIS, PACS의 호환을 위한 솔루션을 제시하였다.