• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.49-59
• /
• 2016

Naval combat system developed in-country is progressing at an alarming rate since 2000. ROK navy will be achieved all vessels that have combat system in the near future. The importance of System Engineering and Integrated Logistics Support based on reliability analysis is increasing. However, reliability analysis that everyone trusted and recognized is not enough and applied practically for development of Defense Acquisition Program. In particular, Existing Reliability Analysis is focusing on reliability index (Mean Time Between Failure (MTBF) etc.) for policy decision of defense improvement project. Most of the weapon system acquisition process applying in the exponential distribution simply persist unreality due to memoryless property. Critical failures are more important than simple faults to ship's operator. There are no confirmed cases of reliability analysis involved with critical failure that naval ship scheduler and operator concerned sensitively. Therefore, this study is focusing on Mean Time To Critical Failure (MTTCF), reliability on specific time and Operational Readiness Float (ORF) requirements related to critical failure of Patrol Killer Guided missile (PKG) combat system that is beginning of naval combat system developed in-country. Methods of analysis is applied parametric and non-parametric statistical techniques. It is compared to the estimates and proposed applications. The result of study shows that parametric and non-parametric estimators should be applied differently depending on purpose of utilization based on test of normality. For the first time, this study is offering Reliability of ROK Naval combat system to stakeholders involved with defense improvement project. Decision makers of defense improvement project have to active support and effort in this area for improvement of System Engineering.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.173-181
• /
• 2023

Aircraft carriers need to maintain an orderly flow of aircraft in order for military ships to conduct combat through aircraft. Maintaining aircraft flow is an important factor in strengthening ship and aviation safety. In order to maintain aircraft flow, it is essential to develop a state-of-the-art air control system that provides higher quality control information by simultaneously accommodating radar-based monitoring information and monitoring information based on CNS integrated technology. Based on this point, this study describes the function and operation method of specific control equipment for the operation of the Aviation Support System and Air Traffic Control System required to operate light aircraft carriers in Korea based on overseas cases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4893-4901
• /
• 2013

In order for a machine, especially used in the defense industry, to consistently operate during its life-time, lots of study has been done in machine design as well as machine maintenance. However, the realistic study is necessary in management and operation of a military support facility, where spare parts are stored and retrieved. In this paper, efficient arrangement of spare parts are proposed to acquire increased in efficiency and decreased in cost for operation management of the military support facility. First, spare parts is assorted by MTBF(Mean Time Between Failure) and divided in to three groups A/B/C as an alternative arrangement. Each defined alternatives will go under simulations and RULA(Rapid Upper Limb Assessment), which is posture classification scheme evaluation attributes, to find working time and posture difficulty and lastly by entropy measurement to be selected. This research proposes the efficient spare parts arrangement in military support facility to minimize working time and posture difficulty. By taking system and human engineering approach together into consideration, it will lead to show a specific value.

• Journal of the Korea Society for Simulation
• /
• v.24 no.2
• /
• pp.19-29
• /
• 2015

M&S techniques are utilized for various purposes on the national defense, and its importance is increasing than ever. For analyzing RAM (Reliability, Availability and Maintainability) of weapon system, using M&S techniques can be more effective and practical way than deterministic approach, because M&S approach can consider uncertain variables and various constraints in the ILS (Integrated Logistics support) field. For design of ILS M&S, we first set up a purpose of M&S, attributes of real system and other similar ILS M&S tool. Then, we convert real system into model which consists of mathematical formula and logical expression. In this thesis, we introduce modeling procedures of M&S that describes total life cycle of 'OO guided weapon system' and the contents proposed in this paper can provide references for developing other M&S tool.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.10
• /
• pp.1298-1304
• /
• 2019

Since the 9·11 terror attack in 2001, the Maritime Logistics Security System has been strengthened and required X-ray image for every imported cargos from manufacturing countries to United States. For scanning cargos, the container inspection systems use high energy X-rays for examination of contents of a container to check the nuclear, explosive, dangerous and illegal materials. Nowadays, the X-ray cargo scanners are established and used by global technologies for inspection of suspected cargos in the customs agency but these technologies have not been localized and developed sufficiently. In this paper, we propose the X-ray array detector system which is a core component of the container scanning system. For implementation of X-ray array detector, the analog and digital signal processing units are fabricated with integrated hardware, FPGA logics and GUI software for real-time X-ray images. The implemented system is superior in terms of resolution and power consumption compared to the existing products currently used in ports.

• Korean Journal of Organic Agriculture
• /
• v.30 no.2
• /
• pp.129-149
• /
• 2022

In March 2020, the National Assembly revised the Framework Act on Cooperatives, allowing a federation of heterogeneous cooperatives, and in October 2020, the Daegu Gyeongbuk Federation of Local Food Cooperatives was launched as the first federation of heterogeneous cooperatives in the country. The local food movement, which has been promoted upward in the local community as an alternative to the existing global food system, seems to be being activated by the government's food plan policy, but critics say that the government's policy goals are not fully achieved due to the top-down policy promotion and lack of communication. In response, this study first examines the role and significance of the local food federation of heterogeneous cooperatives in solving the problems raised in the process of establishing a food plan. In addition, the current status of the federation was investigated for the successful settlement and development of the Daegu Gyeongbuk Federation of Local Food Cooperatives. A survey of affiliated cooperatives, focus group interviews with managers and experts and related literature surveys were conducted. Based on this, the direction of activities was presented, such as the role of an intermediary in Daegu and Gyeongbuk and the role of an intermediary in the public and private sectors etc. In addition, six joint project tasks were specifically presented, including an integrated information sharing system & a logistics network, a planned production system & a joint processing center, an online sales system & a co-marketing promotion, a joint education system, a management of direct stores & restaurants, a sustainable public-private cooperation system etc.

• The Journal of Society for e-Business Studies
• /
• v.11 no.4
• /
• pp.87-106
• /
• 2006

Today as the scale of e-commerce constantly expands, the number and the amount of the consumer frauds are also increasing very rapidly, without sufficient levels of systematic support to prevent them. Internet Escrow service is one of the promising payment mechanisms, which guarantees secure electronic trades and payments. Especially, if the real-time product delivery information is available via RFID-based track-and-trace environment, the security and efficiency of the Internet Escrow services would be improved a lot. In this research, proposed a novel approach to integrate EPCglobal Network, which is a de-facto standard for RFID-based information network model, with Internet Escrow services. The proposed service model was implemented in the form of "Integrated Financial Platform", which supports the contracts among trading partners and the payment via Escrow services by being fully integrated with bank systems. Using the implemented EPCglobal Network-based Escrow service system, we would be able not only to shorten the money-flow cycle and to develop new kinds of loan services, but also to overcome the problems of existing Escrow services including the lack of product-related information and the delay of purchasing decisions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.219-221
• /
• 2022

Seoul Metropolitan City, the world's top 10 cities and Metro City, has traditional urban manufacturing industries such as printing, sewing, and mechanical metals. These manufacturing industries have developed in the form of mutual assistance by forming small business clusters according to detailed industries and processes. Due to the nature of the cluster, logistics between companies for each process in the cluster are being carried out quickly, but it is difficult for relatively small small business owners to prepare order processing services for consumers of finished products. Therefore, it is urgent to introduce an integrated order fulfillment service platform for collective business owners for smooth order and delivery processing. In this paper, we collect and analyze the existing Fulfillment Service data of small business owners in the printing industry among traditional urban industries, and design an artificial intelligence Fulfillment Service Platform system applying CRNN, k-NN, and ID3 Decision Tree algorithm. Through this study, it is expected to greatly contribute to the increase in sales and capacity of small business owners by enabling the use of individual orders and customized delivery services that can be used by any small business owner in the cluster.

• Journal of Construction Engineering and Project Management
• /
• v.4 no.2
• /
• pp.31-40
• /
• 2014

The management of vehicular supply of "perishable" construction material, such as concrete mixes, faces a series of uncertainties such as weather, daily traffic patterns and accidents. Presented in this paper is a logistics control model for managing a hauling fleet with interrelated processes at both ends and queue capacities. Discrete event simulation is used to model the complex interactions of production units and the randomness of the real world. Two alternative strategies for ready mix concrete delivery, with and without an off-site waiting queue, are studied to compare supply performance. Secondly, the paper discusses the effect of an agent-based GPS tracking system providing real-time travel data that lessens the uncertainty of trucking time. The results show that the combination of GPS information with off-site queuing reduces productivity loss and process wastes of concrete placement as well as the idleness of supply trucks when crew or pump experience an unexpected stoppage.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1298-1304
• /
• 2006

공급체인관리(Supply Chain Management)는 단순히 물질의 흐름관리뿐만 아니라 제품의 생산, 공급, 유통 등 다양하고 복잡한 활동들의 물질 및 정보 흐름의 통합이라고 할 수 있다. 그러므로 각 구성원간의 긴밀한 협력과 공동작업을 위해서는 원활한 정보 수집 및 응답이 요구된다. 하지만 기존 시스템은 비이동성 에이전트 개념으로 네트워크의 오버헤드나 혹은 접속 단절 상황에서 작업 수행이 불가능하여 구성원간의 정보 수집과 응답이 실제 업무 처리에 지연이 발생되므로 생산에서 판매까지의 리드타임이 길어지게 되고 채찍효과(Bullwhip Effect)가 더욱 크게 나타난다. 따라서 본 논문에서는 구성원간 협력과 공동작업을 위해 효율적으로 처리되어야 할 정보 수집 및 응답을 대상으로 하는 효율적 다중 응답을 위한 이동 에이전트 시스템을 설계한다. 제안시스템은 기존 시스템의 문제 해결을 위해 이동 에이전트와 객체 복제 메커니즘을 제시하며, 또한 각 구성원 시스템의 투명성을 위해 네이밍 서비스의 구성 방법과 등록된 구성원 시스템 객체의 객체 참조자 정보에 따라 복제된 이동 에이전트가 각 구성원 시스템으로 이주하는 이주 방식과 이주 후, 개별적인 작업 수행 결과를 해당 각 구성원 시스템에 제공하는 다중 응답 시나리오를 제시한다.