• Korean Institute of Interior Design Journal
• /
• 제21권2호
• /
• pp.14-22
• /
• 2012

In regards to museum planning of Korea, it is mainly depending on overseas cases and relevant domestic books without systematic guideline on the space programme in a museum. Therefore, it is urgently required to establish systematic index as it is incapable of proposing detailed analysis and index in accordance with each element. As various problems occurred due to above reason, total floor area of museum was divided by the area of exhibition section, storage section, research section, and public & other area and its ratio was calculated for statistics targeting 614 museums built after 1990's when many public museums were built with the settlement of local self-governing system and the type of museums was diversified. It was again classified into 4 elements of period, region, scale, and type and then the influence of each element on each section of museum was understood through integrated analysis. First, looking into the space programme in regards to total floor area, the floor area ratio of exhibition section, storage section, and research section decreased and the floor area ratio of public & other area increased with the increase in total floor area. It was because not only rest area but also a space to enjoy various cultures, gaining new experience, and accumulate knowledge is located in public & other area. Second, it was revealed that the ratio of exhibition section and storage section has been decreasing since 1990's and ratio of research section and public & other area has been increasing as they can play various roles such as the education and convenience to satisfy cultural desires of visitor in accordance with current trend. Third, it was proved that floor area ratio of exhibition section is lower than storage section in museums located in highly urbanized region. In addition to this, it was revealed that the floor area ratio of research section is in proportion to the population density. As a result of study, significant relation was displayed in scale, era, and region among 4 elements thus it could be utilized as reference for the space programme of domestic museum planning in the future.

• Fire Science and Engineering
• /
• 제30권1호
• /
• pp.138-148
• /
• 2016

A firefighting simulation was developed in order to assess the physical work capacity of firefighters. The simulation consisted of eight common firefighting tasks, including walking with radiant heat for 3 min while wearing full personal protective equipment (PPE). Nine professional firefighters performed the test a total of three times with a 5 min rest interval between each session. The entire series of tests took approximately 30 min to complete ($381{\pm}30s$). Rectal temperatures were found to increase from $37.4{\pm}0.3^{\circ}C$ to $38.5{\pm}0.4^{\circ}C$, while heart rates were found to increase from $92{\pm}18bpm$ to $185{\pm}13bpm$ during testing. Time to completion of the test drills and non-modified physical fitness values showed a significantly negative correlation (r = -0.728, p < 0.05). Firefighters who had longer periods of firefighting service had longer duration time and also recorded higher scores using an integrated scoring system of time to completion (TTC) and physiological strain index (PhSI). The results indicated that the determination of TTC alone can be a misrepresentation of capability, as it neglects to account for accumulated heat strain. The simulated firefighting test provided a useful insight into physical fitness level, but also the comprehensive work capacity of the firefighters when assessed based on TTC and PhSI.

• Journal of the Microelectronics and Packaging Society
• /
• 제19권1호
• /
• pp.39-45
• /
• 2012

Three-dimensional integrated circuit(3D IC) technology has become increasingly important due to the demand for high system performance and functionality. In this work, BOE and HF wet etching of Cu line surfaces after CMP were conducted for Cu-Cu pattern direct bonding. Step height of Cu and $SiO_2$ as well as Cu dishing after Cu CMP were analyzed by the 3D-Profiler. Step height increased and Cu dishing decreased with increasing BOE and HF wet etching times. XPS analysis of Cu surface revealed that Cu surface oxide layer was partially removed by BOE and HF wet etching treatment. BOE treatment showed not only the effective $SiO_2$ etching but also reduced dishing and Cu surface oxide rather than HF treatment, which can be used as an meaningful process data for reliable Cu-Cu pattern bonding characteristics.

• Journal of Intelligence and Information Systems
• /
• 제16권4호
• /
• pp.113-130
• /
• 2010

During the decades, considerable human interventions to comprehend the web information were increased continually. The successful expansion of the web services made it more complex and required more contributions of the users. Many researchers have tried to improve the comprehension ability of computers in supporting an intelligent web service. One reasonable approach is enriching the information with machine understandable semantics. They applied ontology design, intelligent reasoning and other logical representation schemes to design an infrastructure of the semantic web. For the features, the semantic web is considered as an intelligent access to understanding, transforming, storing, retrieving, and processing the information gathered from heterogeneous, distributed web resources. The goal of this study is firstly to explore the problems that restrict the applications of web services and the basic concepts, languages, and tools of the semantic web. Then we highlight some of the researches, solutions, and projects that have attempted to combine the semantic web and business support, and find out the pros and cons of the approaches. Through the study, we were able to know that the semantic web technology is trying to offer a new and higher level of web service to the online users. The services are overcoming the limitations of traditional web technologies/services. In traditional web services, too much human interventions were needed to seek and interpret the information. The semantic web service, however, is based on machine-understandable semantics and knowledge representation. Therefore, most of information processing activities will be executed by computers. The main elements required to develop a semantic web-based business support are business logics, ontologies, ontology languages, intelligent agents, applications, and etc. In using/managing the infrastructure of the semantic web services, software developers, service consumers, and service providers are the main representatives. Some researchers integrated those technologies, languages, tools, mechanisms, and applications into a semantic web services framework. Therefore, future directions of the semantic web-based business support should be start over from the infrastructure.

• Journal of Korean Tunnelling and Underground Space Association
• /
• 제24권2호
• /
• pp.129-151
• /
• 2022

In the current work, a series of three-dimensional finite element analyses have been carried out to understand the behaviour of piles when the adjacent tunnelling passes underneath grouped piles with a reinforced pile cap. In the current study, the numerical analysis studied the computed results regarding the ground reinforcement condition between the tunnel and pile foundation. In addition, several key issues, such as the pile settlements, the axial pile forces, the shear stresses and the relative displacements have been thoroughly analysed, and the IoT platform based preliminary design guidelines were also presented. The pile head settlements of the nearest pile from the tunnel without the ground reinforcement increased by about 70% compared to the farthest pile from the tunnel with the maximum level of reinforcement. The quality management factor data of the piles were provided as API (Application Programming Interface) of various forms by the collection and refinement. Hence it has been shown that it would be important to provide the appropriate API by defining the each of data flow process when the data were created. The behaviour of the grouped piles with the pile cap, depending on the amount of ground reinforcement, has been extensively analysed, and the IoT platform regarding the quality management of piles has been suggested.

• Journal of the Korea Society for Simulation
• /
• 제32권3호
• /
• pp.1-8
• /
• 2023

Modeling of artificial targets in Synthetic Aperture radar (SAR) mainly simulates radar signals reflected from the faces and edges of the 3D Computer Aided Design (CAD) model with a ray-tracing method, and modeling of the clutter on the Earth's surface uses a method of distinguishing types with similar distribution characteristics through statistical analysis of the SAR image itself. In this paper, man-made targets on the surface and background clutter on the terrain are integrated and made into a three-dimensional (3D) point cloud scatterer model, and SAR image were created through computational signal processing. The results of the SAR Stripmap image generation of the actual automobile based SAR radar system and the results analyzed using EM modeling or statistical distribution models are compared with this 3D point cloud scatterer model. The modeling target is selected as an bridge because it has the characteristic of having both water surface and ground terrain around the bridge and is also a target of great interest in both military and civilian use.

• Journal of IKEEE
• /
• 제23권4호
• /
• pp.1461-1464
• /
• 2019

In this paper, we propose the development of embedded board for integrated radiation exposure protection fireman's life-saving alarm capable of location tracking and radiation measurement. The proposed techniques consist of signal processing unit, communication unit, power unit, main control unit. Signal processing units apply shielding design, noise reduction technology and electromagnetic wave subtraction technology. The communication unit is designed to communicate using the wifi method. In the main control unit, power consumption is reduced to a minimum, and a high performance system is formed through small, high density and low heat generation. The proposed techniques are equipment operated by exposure to poor conditions, such as disaster and fire sites, so they are designed and manufactured for external appearance considering waterproof and thermal endurance. The proposed techniques were tested by an authorized testing agency to determine the effectiveness of embedded board. The waterproof grade has achieved the IP67 rating, which can maintain stable performance even when flooded with water at the disaster site due to the nature of the fireman's equipment. The operating temperature was measured in the range of -10℃ to 50℃ to cope with a wide range of environmental changes at the disaster site. The battery life was measured to be available 144 hours after a single charge to cope with emergency disasters such as a collapse accident. The maximum communication distance, including the PCB, was measured to operate at 54.2 meters, a range wider than the existing 50 meters, at a straight line with the command-and-control vehicle in the event of a disaster. Therefore, the effectiveness of embedded board for embedded board for integrated radiation exposure protection fireman's life-saving alarm has been demonstrated.

• Journal of Korea Technology Innovation Society
• /
• 제13권1호
• /
• pp.68-98
• /
• 2010

This study was conducted to analyze the results of the implementation of next-generation growth engine program that was promoted across all government agencies for five years from 2004 as part of a range of initiatives aimed at expanding the nation's economic growth potential. The results were analyzed in this study using five indices: program purpose and design; strategic planning; program management; program results; and pan-governmental agency cooperation and coordination. The results of the study include the following. First, regarding program purpose and design, it was found that consistent leadership in the promotion of the programs was insufficient as the relevant program promotion systems and financial resources were dispersed among governmental agencies, even though the objectives and validity of the programs were recognized. Second, with regard to strategic planning, it was found that although the program objectives and technical development strategy had been established at the beginning of the program, they were biased toward the technical objectives and mainly implemented by the technology suppliers. Third, regarding program management, it was found that the responsibility for general administration, ranging from task planning to policy improvement, was given to the appointed program director but that the system of cooperation among the agencies was insufficient to carry out the relevant tasks. Fourth, regarding the results of the program, it was difficult to understand the results consistently as the economic objectives were not clearly presented, even though the technical objectives were achieved despite the short implementation period of the program. Fifth, with regard to pan-governmental agency cooperation and coordination, it was found that the coordination organization whose remit was to implement the program was established pursuant to the Basic Law on Science and Technology, but that no detailed regulations or guidelines on the operation of the organization were drawn up. To efficiently plan and execute future pan-governmental agency R&D programs that are similar to the next-generation new growth engine program, various requirements should be met, namely, 1) joint planning and consistent program design among governmental agencies, 2) clarification of the program objectives and budget allocation system, 3) establishment of a pan-governmental agency program operation and assessment system, 4) formulation of a strategy for linking R&D with standardization, and 5) enactment of pan-governmental agency joint operation rules.

• The Korean Journal of Archival Studies
• /
• 제78호
• /
• pp.153-195
• /
• 2023

RDBMS is a widely used database system worldwide, and the term dataset refers to the vast amount of data produced in administrative information systems using RDBMS. Unlike business systems that mainly produce administrative documents, administrative information systems generate records centered around the unique tasks of organizations. These records differ from traditional approval documents and metadata, making it challenging to seamlessly transfer them to standard record management systems. With the 2022 revision of the 'Public Records Act Enforcement Decree,' dataset was included in the types of records for which only management authority is transferred. The core aspect of this revision is the need to manage the lifecycle of records within administrative information systems. However, there has been little exploration into how to manage dataset within administrative information systems. As a result, this research aims to design a database for a record management module that needs to be integrated into administrative information systems to manage the lifecycle of records. By modifying and supplementing ISO 16175-1:2020, we are designing an "human resource management system" and identifying and evaluating personnel management dataset. Through this, we aim to provide a concrete example of record management within administrative information systems. It's worth noting that the prototype system designed in this research has limitations in terms of data volume compared to systems currently in use within organizations, and it has not yet been validated by record researchers and IT developers in the field. However, this endeavor has allowed us to understand the nature of dataset and how they should be managed within administrative information systems. It has also affirmed the need for a record management module's database within administrative information systems. In the future, once a complete record management module is developed and standards are established by the National Archives, it is expected to become a necessary module for organizations to manage dataset effectively.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.975-976
• /
• 1993

This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}