• 전자공학회논문지D
• /
• 제34D권1호
• /
• pp.8-13
• /
• 1997

An electric field due to point dipole within conductor-backed thin dielectric layer above the earth is calculated by using saddle point method When the dielectric layer is thin enough to support a cutoff mdoe, we show that the field may be approximated by sum of contributions of branch points of TE mode and poles of tM mode and that the branch points and poles contributions are interpreted as an evanescent lateral waves and leaky waves, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.521-522
• /
• 2008

An etch-less simple method was developed to fabricate two-dimensional nanostructures on glass substrate directly by using UV curable polymer resin and UV nanoimprint lithography in order to improve output coupling efficiency of OLEDs. OLEDs integrated on nanoimprinted substrates enhanced electro-luminance intensity by up to 50% compared with the conventional device.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.438-443
• /
• 2010

In this paper, behaviors of photonic crystal (PC) radiative structures and antenna arrays have been compared for two types of uniform and binomial excitations. Appropriate duality has been shown between them. These results can be generalized to other types of excitation and arrangement of photonic crystal radiative arrays such as linear, planar and circular arrays of three dimensional (3D) photonic crystal termination resonators. Using these results in designing photonic circuits has some advantages for shaping a particular radiative beam at the photonic crystal exit, for instance reducing the divergence angle of the main lobe in order to enhance the directivity, for better coupling, or for splitting the emitted beam, for dividing the output beam to the next devices in photonic integrated circuits (PIC). For analysis and simulation of the photonic crystal structures, the finite difference time domain (FDTD) method has been employed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.510-513
• /
• 2008

The traditional computational fluid or structure dynamics analysis approaches have contributed to solve many delicate engineering problems. But for the most of recent engineering problems which are influenced by fluid-structure interaction effect strongly, traditional individual approaches have limited analysis abilities for the exact simulation. Owing to above-mentioned reason, nowadays fluid-structure interaction analysis has become a matter of concern and interest. FSI analysis require several unprecedented techniques for the combining individual analysis tool into integrated analysis tool. The Arbitrary Lagrangian-Eulerian(ALE, in short) method is the new description of continum motion,which combines the advantages of the classical kinematical descriptions, i.e. Lagrangian and Eulerian description, while minimizing their respective drawbacks. In this paper, the ALE description is adapted to simulate fluid-structure interaction problems. An automatic re-mesh algorithm and a fluid-structure coupling process are included to analyze the interaction and moving motion during the 2-D axisymmetric solid rocket interior FSI phenomena simulation.

• Journal of the Optical Society of Korea
• /
• 제15권2호
• /
• pp.187-195
• /
• 2011

We have designed two photonic crystal waveguide (PCW) structures with output focused beams in order to achieve more coupling between photonic devices and decrease the mismatch losses in photonic integrated circuits. PCW with coupled resonator optical waveguide (CROW) termination has been optimized by both one dimensional (1D) and seven dimensional (7D) particle swarm optimization (PSO) algorithms by evaluating the fitness function by the finite difference time domain (FDTD) method. The 1D and 7D-optimizations caused the factors of 2.79 and 3.875 improvements in intensity of the main lobe compared to the non-optimized structure, whereas the FWHM in 7D-optimized structure was increased, unlike the 1D case. It has also been shown that the increment of focusing causes decrement of the bandwidth.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.140-148
• /
• 2000

This paper presents a fault detection and isolation(FDI) method based on Generalized Likelihood Ratio(GLR) test for the tightly coupled SDINS/CPS system. The GLR test is known to have the capability of detecting an assumed change while estimating its occurrence time and magnitude, and isolating the changing part. Once a fault is detected even if we don't know if the fault occurrs at either INS or GPS, multi-hypothesized GLR scheme performs the fault isolation between INS and GPS, and find which satellite malfunctions. However, in the INS faulty case, it turned out to fail to accomodate the fault isolation between accelerometer and gyroscope due to the coupling effects and a poor observability of the system. Hence, to isolate the INS fault, it needs to change the attitude of the vehicle resulting in enhancing the degree of observability.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1494-1503
• /
• 2018

This paper proposes a novel probabilistic load flow model for power systems integrated with large-scale wind power, which considers the multi-time scale dispatching features. The ramp limitations of the units and the steady-state security constraints of the network have been comprehensively considered for the entire duration of the study period; thus, the coupling of the system operation states at different time sections has been taken into account. For each time section, the automatic generation control (AGC) strategy is considered, and all variations associated with the wind power and loads are compensated by all AGC units. Cumulants and the Gram-Charlier expansion are used to solve the proposed model. The effectiveness of the proposed method is validated using the modified IEEE RTS 24-bus system and the modified IEEE 118-bus system.

• 전기학회논문지
• /
• 제57권8호
• /
• pp.1412-1415
• /
• 2008

A glucose biosensor using a microdisk resonator in polymeric waveguides was developed by observing either the shift in the resonant wavelength or the variation in the optical power. The deformation in the transfer curve of the vertically coupled resonator sensor resulting from the variation in the disk-to-ring coupling, which was incurred by the application of the target analyze, was suppressed. And the refractive index of the polymeric waveguide was devised to closely follow that of the analyze itself for enhancing the sensitivity of the sensor. The sensitivity and measurement range were observed to be respectively 0.14 pm/(mg/dL) and 1500 mg/dL (theoretically up to 4700 mg/dL, for the wavelength shift method and 0.04 dB/(mg/dU and 140 mg/dL the power variation scheme.

• 한국수자원학회논문집
• /
• 제38권4호
• /
• pp.259-269
• /
• 2005

본 연구에서는 제방의 월류 및 붕괴에 따른 홍수파가 제내지로 전파되는 경우의 물리적인 특성을 고려하여 하천에 대한 홍수류 해석은 Preissmann 기법을 적용하였으며, 제내지에서의 범람해석을 위해 2차원 모형을 적용하여 해석할 수 있도록 구성하였고, 이들 두 모형이 상호 작용할 수 있는 하도-제내지 연결부 수치해석 모형을 개발하였다. 본 모형에서는 잠수효과의 해석을 위한 관련방정식을 도입하여 제내지에서의 수위 상승에 따른 하천으로부터의 월류량을 정확하게 계산할 수 있도록 구성하였다. 본 연구모형을 2002년 9월 낙동강 유역 실제 제방붕괴의 경우에 적용하여 제내지에서의 2차원 범람양상을 유속분포와 범람수심에 대해서 주요 시간대별로 계산하여 도시하였으며 모의결과는 당시의 실측자료 및 홍수범람범위와 잘 일치되는 것으로 나타났다.

• 한국전자파학회논문지
• /
• 제14권10호
• /
• pp.1004-1010
• /
• 2003

본 논문에서는 유한한 도체 두께를 갖는 결합선로를 이용하여 1/4파장 역방향 방향성 결합기를 설계하였다. 방향성 결합기를 구성하는 유한 도체 두께를 갖는 결합선로를 해석하기 위한 방법으로 간단하고 빠른 수치해석 방법인 모드정합법을 사용하였다. 본 논문의 해석 결과는 도체 두께를 고려한 역방향 방향성 결합기의 설계가, 도체 두께를 고려하지 않고 설계한 경우 기존에 알려졌던 단점들인 약한 결합특성, 낮은 지향성, 그리고 비현실적인 결합선로의 폭을 극복할 수 있음을 보여준다. 또한, 수치해석 결과로부터 l/4파장 역방향 방향성 결합기에서는 도체 두께의 고려로 강한 결합특성을 만드는 것이 가능하지만, 결합길이가 약간 길어진다는 사실을 확인하였다. 본 논문에서 해석한 유한한 도체 두께는 역방향 방향성 결합기의 새로운 설계 변수로서 사용이 가능하며, 아울러 다양한 마이크로파 집적회로의 설계에도 응용이 가능함을 보여준다.