• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.286-291
• /
• 2008

Insulation of refrigerator with gasket material near door becomes the technical point at the aspect of heat loss and energy efficiency. Heat loss of refrigerator through the gasket is nearly 30%. In this paper, quantitative evaluation method of heat loss through gasket in established suggest the method for the improvement of heat loss. To analyze the heat transfer, we have used the common software Fluent that is used to CFD. Because of using the convection coefficient of heat transfer, we have solved only the equation of energy for heat transfer. As a result, we have known that heat loss flows through the heat flux vector and that the heat gathered out of the outside iron plate is transferred inner part through the gasket and ABS, etc. Through the result of the numerical simulation that use sub-gasket, we have known that we are able to reduce the heat loss about $20{\sim}40%$. when we applied that sub-gasket on a real refrigerator, the power consumption had reduced about 4.76%. In addition, when we applied a more improved sub-gasket on a real refrigerator and measured the power of the refrigerator the power consumption does reduce about 3% and we will try to apply the improved sub-gasket on a new models of refrigerator.

• 마이크로전자및패키징학회지
• /
• 제26권4호
• /
• pp.89-94
• /
• 2019

전력저장용 전기에너지 저장장치의 일종인 NaS 전지 단위 셀을 개발함에 있어서 알파-알루미나 절연세라믹 캡과 베타-알루미나 전해질 튜브 간의 세라믹-세라믹 상호 접합을 위하여 글라스 기반의 실링소재가 필요하다. 본고에서는 이 세라믹-세라믹 접합용 글라스 실링 페이스트를 제조함에 있어서, 열간 칭법에 의한 글라스 프릿 제조와 상분석, 분말입도 분석 및 글라스 조성에 따른 열팽창계수 변화 및 표면거칠기를 분석하였다. 또한 글라스 실란트의 접합력 평가를 위해 종래 솔더 볼 조인트의 접합력 평가용 분석장비인 Dage bond tester를 이용하여 세라믹-세라믹 컴포넌트의 작은 접합면에 대한 접합력 측정 방법을 제안하였다.

• KIEAE Journal
• /
• 제16권4호
• /
• pp.41-46
• /
• 2016

Purpose: This is a study on the planning of temporary housing for post application of Mega Sports facilities. The subject of the study is 2018 Pyeongchang Winter Olympics, which is to suggest building an alternative temporary housing using shipping containers(high cube), which solve the lack of accommodations and recycle temporary housing after Olympics, save money and be eco-friendly in Olympics. Method: This study includes this ; research on the a fact-finding survey about Mega sports facilities post application and demand survey on 2018 Pyeongchang Winter Olympics accomodations and an analysis about temporary housing plan. Furthermore we decided temporary housing building plan by analyzing residents' needs and traits of the housing etc. Through this, we made a schematic design for household units. Result: As a result, this study is a plan of making space, forms, and structure. The planned size is $38.4m^2$(L:12m, W:3.2m) except balcony, and indoor height is 2.5m. The space consists of entrance, bathroom, bedroom and living room with folding furniture system. Also there's a detailed floor plan of the ceiling, wall, and floor we drew up. The ceiling and wall consist of dampproof film, noncombustible board, fire proof urethane form, and color-designed sheet. The floor is composed of floor tile, cement mortar, light concrete(with heat coil), insulation, and dampproof film. Additionally, this study is a plan of interior dry wall with detail using modular construction method for work efficiency and quality improvement.

• 한국전기전자재료학회논문지
• /
• 제21권9호
• /
• pp.795-800
• /
• 2008

A sublimation method using the SiC seed crystal and SiC powder as the source material is commonly adopted to grow SiC bulk single crystal. However, it has proved to be difficult to achieve the high quality crystal and the process reliability because SiC single crystal should be grown at very high temperature in closed system. The present research was focused to improve SiC crystal quality grown by PVT method through using the new inner guide tube. The new inner guide tube was designed to prevent the enlargement of polycrystalline region into single crystalline region and to enlarge the diameter of SiC single crystal. The 6H-SiC crystals were grown by conventional PVT process. The seed adhered on seed holder and the high purity SiC source materials are placed on opposite side in sealed graphite crucible surrounded by graphite insulation. The SiC bulk growth was conducted around 2300 $^{\circ}C$ of growth temperature and 50 mbar in an argon atmosphere of growth pressure. The axial thermal gradient across the SiC crystal during the growth was estimated in the range of 15${\sim}$20 $^{\circ}C$/cm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1234-1236
• /
• 2005

High temperature superconducting(HTS) windings for an HTS transformer which have been developed have two kinds of type, one is the layer type and the other is disk type. The disk type windings have advantages over the layer type ones for a power transformer such as good insulation and limit of voltage stress. But this kind of HTS winding generates excessive AC losses caused by strong magnetic field component perpendicular to the surface of the HTS wire. Nevertheless, the layer type windings have adopted for an HTS power transformer so far because of the small AC losses of the HTS windings. We propose a new winding method for a high voltage HTS transformer which has advantages of both type of HTS windings, and we call it continuous disk type HTS winding. This new type of HTS winding consists of pile of lots of HTS disk windings which have no resistive joint between them. A prototype of an HTS winding was fabricated by the new winding method we proposed and characteristic test was carried out. The test result shows that the new type HTS windings can be applied to HTS power transformers, especially to the high voltage ones.

• Journal of the Korean Wood Science and Technology
• /
• 제45권2호
• /
• pp.147-158
• /
• 2017

Among the energy consumption in building, the heating energy takes the largest part. Therefore, it is important to minimize the heat energy loss in building for the reduction of overall energy use in construction. The most important points for the minimization of energy loss in building are insulation and airtightness. Especially, in wood houses, airtightness is very important for energy saving as well as increase of durability. However, the researches on airtightness of wood buildings have been started recently and are very deficient especially in Korea. In this study, air leakage properties and airtightness performance were evaluated for light-frame wood houses built in Daejeon and Chungnam area. Total 7 houses were evaluated, among which four houses (Case 1 to Case 4) were in the construction stage before interior finish and the other three houses (Case 5 to Case 7) were after completion of construction work. The tests for airtightness were conducted by pressurization-depressurization method, and the factors included in the measurements includes air leakage rate at 50 Pa (CMH50), air change rate at 50 Pa (ACH50), equivalent leakage area (EqLA) and EqLA per floor area. As a result of this study, key air leakage points in wood houses were found to be the gaps between floor and wall, the holes for wiring and plumbing, the double glasses windows and the entrance doors. The average value of ACH50 for the houses after completion of construction work was $3.5h^{-1}$ that was similar to Europe standard ($3.0h^{-1}$). ACH50 was proportional to EqLA per floor area but inversely proportional to the internal volume, the net floor area and the area of window.

• Journal of Welding and Joining
• /
• 제25권4호
• /
• pp.28-34
• /
• 2007

The heating unit of direct heating method manufactured as the plasma spray coating of $TiO_2/NiCr$ conductive heating material on the surface of heating unit in order to improve the disadvantages of indirect heating method. $TiO_2$ and NiCr (80wt.%Ni-20wt.%Cr) that had the properties of conduction and heating was chosen for the conductive heating material. The compositions of the composite powders were studied $TiO_2-30wt.%NiCr\;and\;TiO_2-10wt.%NiCr$. As the heating temperature was increased, the hardness of heating layer was increased because of the fine microstructure and the decrease of porosity. The adhesion strength was decreased for coarsening and connection of voids in the insulation layer, and the electrical resistivity of heating layer was increased for fine crack formation and growth. In this study, the best efficient sprayed coatings with heating unit was concluded as the plasma sprayed $TiO_2-10wt.%NiCr$ coatings that was heat treated at $300^{\circ}C$.

• 공업화학
• /
• 제23권2호
• /
• pp.195-203
• /
• 2012

폐 LCD유리의 재활용 방안은 평판 디스플레이용 폐 LCD판넬의 전체 재활용 공정의 확립을 위한 중심요건이다. 본 연구는 폐 LCD유리를 보온단열재, 흡음차음제, 토목용 경량골재 또는 수처리용 담체 등의 원료로 재활용하기 위한 발포공정의 기초공정으로서 폐 LCD유리의 분쇄특성, 적절한 탄소발포제의 선정, 유가물 회수를 위한 산침출 후 잔유된 유리질의 물성 및 이들의 발포화의 문제점을 조사하였다. 폐 LCD유리의 분쇄공정을 통해 발포용 원료로 사용가능한 미분화가 가능하였으며, 고융점을 갖는 LCD 유리의 발포화를 위해서는 결정성 천연흑연이 적절하였으며, 산 침출 후 잔사인 슬러지 상태의 폐유리성분도 발포체의 원료로 재활용될 수 있음을 확인하였다.

• 한국철도학회논문집
• /
• 제19권4호
• /
• pp.468-479
• /
• 2016

고압 전선 등에 장착된 시스템에 전원을 공급하기 위해서는 절연 이격 거리 이상의 거리에 무선으로 수십 Watt 급의 전력을 보낼 수 있는 시스템이 필요하다. 이러한 무선 전력 전송 시스템은 대개 코일의 크기가 10cm 이상의 대형이다. 본 연구에서는 이처럼 대형 코일을 Printed circuit board를 이용해 제작할 경우 발생하는 손실 발생원 들을 분석하고 그 중 가장 주요한 손실원인이 Dielectric loss 라는 것을 밝혔다. 또한 이 dielectric loss를 최소화 하기 위해서 PCB의 재질 선정 방법 및 Distributed tuning capacitor method를 제시해 $40cm{\times}40cm$ 크기의 4턴 및 5턴 코일의 설계 방법을 제시했고, 실험을 통해 Quality factor를 300 이상으로 만들 수 있음을 보였다.

• 한국인터넷방송통신학회논문지
• /
• 제21권5호
• /
• pp.19-26
• /
• 2021

본 논문에서는 고출력 저손실의 도파관 공간결합 구조를 제안하였다. 제안하는 공간결합구조는 각 포트의 중심에서 원형 도파관을 통해 결합하는 방식으로 구현 하였다. 특히 도파관의 모드 중 전송 선로 손실이 가장 적은 TE01모드를 이용하여 저 손실을 구현하고, 새로운 모드 변환 방식을 적용하여 소형화를 이루었다. 또한 전계 분석을 통해 새로운 모드 변환 구조의 절연 파괴 전압을 계산하여 고출력에 적합함을 확인하였다. 최종 8-way 도파관 공간 결합기를 설계, 제작하여 삽입 손실은 0.4dB 이하 결합효율 97% 이상의 결과를 얻어 평면 결합 방식 대비 전기적 성능이 매우 우수함을 확인하였다.