• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1867-1870
• /
• 2003

The analysis and simulation are the method to study the behavior, response, and specification of the driver device. This paper proposes brushless DC drive which using the vector control technique. The encoder is used detect the rotor position and decode to Three-phase step signal. The step signal is modulated with triangle signal and change to the pulse width modulation (PWM) signal. The PWM signal is used for control the input power of the motor based on the vector control technique. The experimental results of the driver circuit and motor response performed under the following condition: as the motor was started, change the load torque, and vary the supply voltage. The experimental performs with a dynamometer and the test results are compared to the simulation method is the same result.

• 제어로봇시스템학회논문지
• /
• 제3권1호
• /
• pp.32-39
• /
• 1997

One of the most important performance criteria in tuning the gain of position loop controller for CNC machining center is the contour error. In this papre we analyze contour error in the linear and circular interpolations for the axis-matched and mismatched cases. To have small contour errors, it is necessary to set the P gain for each axis to be same. And the D gain should be much smaller than the P gain. Baded on the analysis in the frequency domain, we propose a gain tuning method for the P and PD controllers. We show that the PD controller is better than the P controller. The effectiveness of this method is demonstrated by experiments.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권2호
• /
• pp.133-138
• /
• 2001

This paper describes a system that can used to recognize an unknown material regardless of the change of ambient tem-perature using temperature response curve fitting and fuzzy neural network(FNN). There are some problems to realize the recogni-tion system using temperature response. It requires too many memories to store the vast temperature response data and it has to be filtered to remove noise which occurs in experiment. And the temperature response is influenced by the change of ambient tempera-ture. So, this paper proposes a practical method using curve fitting the remove above problems of memories and nose. And FNN is propose to overcome the problem caused by the change of ambient temperature. Using the FNN which is learned by temperature responses on fixed ambient temperature and known thermal conductivity, the thermal conductivity of the material can be inferred on various ambient temperature. So the material can be recognized by the thermal conductivity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.127-130
• /
• 1995

Fuzzy controllers have proven to be powerful in controlling dynamic processes where mathematical models are unknown or intractable and ill-defined. The way of improving the performance of a fuzzy controller is based on making up rules, constructing membership functions, selecting a defuzzification method and adjusting input-output scaling factors. But there are many difficulties in tuning those to optimize a fuzzy controller. So, in this paper, we propose the look-up table based self-orgenizing fuzzy controller (LSOFC) which optimizes look-up values resulting from the above fuzzy processes. We use the plus-minus tuning method(PMTM), scanning the value through the processes of addition and subtraction. Simulation results demonstrate that the performance of LSOFC is far better than that of a non-tuning fuzzy controller.

• 제어로봇시스템학회논문지
• /
• 제21권8호
• /
• pp.794-800
• /
• 2015

This paper describes the design for a defective product inspection device for the curved glass used in smart-phone. Cameras are used as inspection devices to find cracks in LCDs (Liquid Crystal Displays), PDPs (Plasma Display Panels), etc. The devices used to inspect the curved glass used in smart-phone consist of a camera, two back-light apparatus, an inspection apparatus main body, and an image processing program. Camera image calibration was performed to smooth an image taken with the camera, and as a result, the average error was less than 0.12 pixels. And the image of a smart-phone's curved glass taken with the camera was processed using the produced program. As a result, the program could correctly extract the cracks on the curved glass. Thus, it is thought that the designed inspection device can successful detect cracks in curved tempered glass.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.913-917
• /
• 1989

In this paper, the selection method of weighting matrices in the discrete-time LQ problem are suggested in order to improve the guaranteed stability margins, i.e. the gain and phase margins. The asymptotic properties of the solution of the algebraic Riccati equations are investigated by using the closed form solution of the difference Riccati equations. It is shown that the solution of the algebraic Riccati equations monotonically increases as the state weighting matrix Q or the control weighting matrix R increase. The increasing rate of the solution is shown to be much less than that of R for large R. It is also proven that the guaranteed stability margins increases as the ratio between Q and R decreases.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.690-695
• /
• 1994

We propose a method to reduce the marking expression about the places when we model a discrete-event system using the Petri net. The net with reduced marking expression has the same dynamic behavior as the original model. The number of the places can be reduced by the number of the resource places of the Petri net, and consequently the net can be significantly simplified, still preserving the dynamic properties of the net.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.954-956
• /
• 1999

In the case of using sensor in the industrial control systems, the location of sensor is not close to the system which utilizes the sensor data. Two main functions of intelligent sensor are data processing and communication. In this paper, we will show that the developed result of intelligent sensor, which process the sensor data inside of the sensor module, except for the communication function. For this, we refered to the Profibus and Fieldbus Foundation standard.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.770-771
• /
• 1988

Some properties of a matrix containing at least one pair of purely imaginary eigenvalues in the matrix sign function algorithm are explicated. It is shown that such a nonsingular matrix can be end up a singular matrix in the matrix sign function algorithm independently of the matrix condition. The result can be utilized to identify and locate all the eigenvalues theoretically.

• International Journal of Control, Automation, and Systems
• /
• 제6권2호
• /
• pp.269-277
• /
• 2008

This paper proposes a necessary and sufficient condition of convergence in the $L_2$-norm sense for a feedback-based iterative learning control (ILC) system including a multi-input multi-output (MIMO) linear time-invariant (LTI) plant. It is shown that the convergence conditions for a nominal plant and an uncertain plant are equal to the nominal performance condition and the robust performance condition in the feedback control theory, respectively. Moreover, no additional effort is required to design an iterative learning controller because the performance weighting matrix is used as an iterative learning controller. By proving that the least upper bound of the $L_2$-norm of the remaining tracking error is less than that of the initial tracking error, this paper shows that the iterative learning controller combined with the feedback controller is more effective to reduce the tracking error than only the feedback controller. The validity of the proposed method is verified through computer simulations.