• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.18 no.2
• /
• pp.23-34
• /
• 2010

After analyzing each procedure from standard instrument procedures used at Incheon International Airport, which is believed to have caused noise problems in and around Ganghwa island, we came to a conclusion that some Standard Instrument Departure Procedures and Standard Instrument Approach Procedures need to be revised, and therefore we made some propositions with regard to noise abatement procedures(CDA, RNAV approach etc.). Additionally, we evaluated viability of the proposed flight procedures by conducting a number of demonstrations with use of flight simulation.

• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.185-193
• /
• 2014

In this study, development process of a design program for Instrument Flight Procedure (IFP) is briefly described. Survey results and corresponding analysis are shown to enhance a market competence of the deliverables. Standards and regulations for IFP design are analyzed to derive the system requirements. Detail development processes and test procedures are explained.

• Journal of Advanced Navigation Technology
• /
• v.4 no.1
• /
• pp.11-22
• /
• 2000

Instrument flight simulators are used for training the interpretation and operation techniques for all kinds of aircraft instruments, cockpit procedures, etc., in order that pilots cope with the situations which can be occurred in actual flight. However, the simulators developed so far are concerned about operating in same environment to actual aircraft. And little researches concentrate on developing systematic training system for basic tasks and takeoff-landing procedures, and automatic evaluation methods on the training results. Therefore, in this paper, we propose implementation and evaluation methods for flight tasks such as tasks in flight, takeoff-landing procedures and course flight.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.4
• /
• pp.24-30
• /
• 2017

Obstacle defines all fixed and mobile objects, or parts thereof, that are located on an area intended for the surface movement of aircraft or extend above a defined surface intended to protect aircraft in flight or stand outside those defined surfaces and that have been assessed as being a hazard to air navigation. Aircraft operations are based on electronic supporting systems using radio frequencies to assist pilots. These frequencies can receive outside interference that change their courses or power, such as distortion, attenuation or reinforcements by an obstacle. This is a preliminary case study that shows the relation of instrument flight procedures and the degree of interferences introduced by a planned obstacle, which is a main bridge post, within the service volume of the radio navigation aids. For the purpose of this study, the case airport's data and it's VOR/DME and ILS systems' limitations are analyzed, as well as the relation of interferences between the obstacle and navigation aides were reviewed with the internal regulations in Korea.

• Journal of Aerospace System Engineering
• /
• v.5 no.2
• /
• pp.1-7
• /
• 2011

On this study, applicable aircraft pitot-static system airworthiness requirements and flight test techniques for PEC(Position Error Correction) to KAS Part 23 airworthiness standards are introduced. Also, pros and cons, applicable test conditions, test procedures and required test parameters of each flight test techniques are reviewed on this study.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.272-277
• /
• 2024

In most countries, instrument flight procedures are designed by applying one of the following standards: the International Aviation Organization's DOC 8168, Air Navigation Services and Operation Procedures (PANS-OPS), or the US Federal Aviation Administration's TERPS, Terminal Procedures. In particular, the circling approach procedure has many differences between the two standards, and the US terminal procedure (TERPS) has become more complicated since 2013 by applying expanded standards depending on altitude. The circling approach procedures are more risky than straight-in approach procedures because it involves maneuvering the aircraft close to the ground at low energy for landing. In order to accurately understand these differences, this study provides to distinguish by what criteria the circling approach procedure is designed according to individual domestic airports in Korea, to calculate the radius for the range of circling approach areas that guarantee minimum obstacle avoidance during circling approach maneuvers, and to present methods for performing safe circling approach procedures.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.192-198
• /
• 2015

Since instrument landing system currently operating in most airports is operating in single-pass, it is not possible to accommodate a large number of aircraft. A satellite navigation system GBAS using a GNSS has been developed to solve these limitation when air traffic increases. GBAS is better than the ILS in position accuracy and capable of landing through multiple paths rather than a single path, the aircraft can perform varied landing procedures. In this paper, after we established a virtual ILS procedures at Taean Airfield in which ILS installation is impossible due to environmental requirements and airspace restrictions, flight test was performed by Cessna Skyhawk 172 to compare the virtual ILS procedures and curved approach procedure and the advantage of curved approach was confirmed.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.1
• /
• pp.44-49
• /
• 2022

This study performed precision instrument landing procedures for pilots with a commercial pilot license using VR HMD flight simulators, and assuming that the center of the pilot's gaze is in the front, 3-D.O.F. head tracking data and 2-D eye tracking of VR HMD worn by pilots gaze tracking was performed through. After that, AOI (Area of Interesting) was set for the instrument panel and external field of view of the cockpit to analyze how the pilot's gaze was distributed before and after the decision altitude. At the same time, the landing results were analyzed using the Localizer and G/S data as the pilot's precision instrument landing flight data. As a result, the pilot was quantitatively evaluated by reflecting the gaze tracking and the resulting landing result using a VR HMD simulator.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.515-520
• /
• 2020

The development of autopilot system and flight management system (FMS) equipment in today's aircraft navigation can be attributed to the reduction of pilots' workload and the navigation safety. The effect of autopilot and FMS equipment is greater, especially in heavy airport traffic or complicated of the departure. However, some airport specific departure procedures result in an uncommanded turn event due to an error in the FMS, causing aircraft to deviate from the center line of the route. With most departure procedures requiring area navigation (RNAV) operation, pilot situation awareness and corrective action are the only ways to minimize aircraft deviation to maintain the safety of area navigation. Through analysis of the occurrence status of the uncommended turn event by aircraft type, airport and flight phase, and comparative analysis of the survey results of foreign airlines and the airlines self-reduction plan with the aircraft manufacturer's corrective action, it is intended to give implications for the need for more fundamental measures to prevent recurrence of such events.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.1
• /
• pp.13-18
• /
• 2012

'Navigable airspace' means an airspace at and above the minimum safe flight level, including airspace or flight procedures needed for safe takeoff and landing. Airspace may be established as needed and may be abolished, and in some cases may be limited to airspace management. These are absolutely based on risk assessment. Safety is the state in which the risk of harm to persons or of property damage is reduced to, and maintained at or below, an acceptable level through a continuing process of hazard identification and risk management. 'Risk' is the assessed potential for adverse consequences resulting from a hazard and 'Risk assessment' involves consideration of both the frequency and the severity of any adverse consequence. This paper proposed 'risk assessment procedure' for the structural changes of Navigable Airspaces through literature reviews relevant to manuals on airspace management and risk management.