• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1328-1332
• /
• 2006

As the city is developed, Sewerage outlet is installed for the discharge of rainfall special at new town or modified the existed sewerage network. But the sewerage outlet is influenced to the cannel flow. In this paper, for analyzing variation of flow properties by installing sewerage outlet, it was experimented a with $120^{\circ}$ channel junction. The water depth is rapidly increasing at the just before sewerage installed position, but the velocity is represented increasing at the just after sewerage installed position. In addition, the biggest increment of water depth and velocity is represented $3.0m^3/hr{\sim}4.0.m^3/hr$. At the position of the sewerage outlet installation, separate install at up and downstream is rather than only one position at up or down stream. If it was not install both installation, the upstream installation is better than downstream installation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.472-475
• /
• 2009

Nowadays, Short headway is a requirement of Signaling System applied to subway and Light Rail Transit (LRT) being constructed in Korea. To satisfy this Systematic Requirement, the accuracy of train position information on the line is one of the main element to improve ATC system safety and performance. On-board ATC system performs feasibility of Train Position as comparing data from balise installed along the track with data from tachometer installed at both axles of train.

• 한국공간구조학회논문집
• /
• 제18권2호
• /
• pp.43-50
• /
• 2018

In this study, TMD(Tuned Mass Damper) is installed in a retractable-roof spatial structure in order to investigate dynamic response characteristics according to mass ratio and installed position of TMD on large spatial structures. The example analytical model is generated based on the Singapore sports hub stadium. Twenty eight analytical models are used to investigate optimal installation position of TMD for the example retractable-roof spatial structure using 4 to 16 TMDs. The mass of one TMD is set up 1% of total mass at the example analytical model. Displacement response ratio of model with TMD is compared with that of base model without TMD. It has been found from numerical simulation that it is more effective to install TMD at the edge of the spatial structure rather than to concentrate the TMD at the center of the spatial structure.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.226-231
• /
• 2011

This research was done to prove the optimal position to detect a train reader when using a multiple fusion sensor. The experiment was done using four Train installed RFID Readers located on the train. These readers were read by sensors installed at intervals of 50 meters on the up and down sections of the Line 8, from Amsa station to Moran station. We analyze errors in the recognition range according to the Tag's number of recognition due to RFID of train speed, and propose a method of estimation for an accurate estimation of the position of train At this the Least-Squares Method is applied to judge the position of train accurately from the error because of Tag's number of recognition and RFID of train speed. also It is verified through simulation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1678-1684
• /
• 2007

Platform Screen Door(PSD) has been installed in train manual operation section(ATS/ATC) by SeoulMetro since 2005. PSDs are now operating at 17 stations in SeoulMetro lines. As a result, it increases the safety of passenger, makes a comfortable platform and saves the energy of air conditioning. For PSD operation, train shall stop within 600mm of the train stop reference point. In train manual operation section, the detection system of train position is required to notify the train driver of train position and to ensure the condition that train stops the correct position for PSD operation. To detect the train stop position, the optical sensor shall be installed at platform. However, in case of SeoulMetro lines, the detection criterions of the train correct position stop are different because of using various types of trains which have different size and shape of front cars. In this paper, to solve this problem, the precise detection algorithm of the train stop at the correct position is used, and Laser distance measure sensor is introduced to notify the distance form the reference point of the train correct stop to train driver. This system has been applying to Seoul Metro line total.

• 한국정보통신학회논문지
• /
• 제15권6호
• /
• pp.1238-1244
• /
• 2011

본 논문은 레이저 내비게이션의 위치측정을 위한 반사체 매칭방법을 제안하다. 레이저 내비게이션은 벽면에 부착된 반사체의 각도와 거리를 측정하는 장치이고 위치를 측정하기 위해서는 반사체의 매칭 기법이 필요하다. 대표적인 매칭 방법으로는 측정된 반사체의 위치를 이미 알고 있는 반사체의 위치로 평행 이동 한 후, 회전 하면서 매칭하는 방법이었다. 하지만 이 방법은 연산량이 많고 외란에 약하다는 단점이 있다. 이에, 본 논문에서는 연산량을 줄이고 외란에 강인한 반사체 매칭 방법을 제안한다. 제안된 방법은 계측된 반사체들의 위치를 설치된 반사체의 실제 위치로 생성한 후, 계측된 반사체들을 회전하면서 매칭하는 방법이다. 실험은 직접 설계한 AGV를 이용하였으며 조향각과 주행속도를 변화 시키면서 위치측정 정밀도를 비교하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1456-1459
• /
• 2007

Protective equipments have a very important protection role in power accident on catenary line. These equipments are installed on electrical pole. The poles have complicated with many bands(moveable bracket, branch wire anchor, shield wire, etc). So we have improved bands and installed bands on pole to test technical condition. The Result has showed effectiveness due to fixed position change of fault protective wire and to improve band shape. For example, reduction of band made cost, simplification of installing, correct position of protective wire and shield wire.

• Journal of Biosystems Engineering
• /
• 제35권4호
• /
• pp.224-230
• /
• 2010

The purpose of this study was to develop position control system of an electric actuator for automatic shuttle shifting of a tractor. The electric actuator was installed at the link of the forward-reverse gearshift of the tractor transmission, and controlled in the ranges of forward, neutral, and reverse positions. The position control system of the electric actuator was developed based on PID (Proportional Integral Derivative) controller and transfer function of the electric actuator. The coefficients of the PID controller were determined by Ziegler-Nichols (Z-N) method and optimized using simulation program. The prototype AMT (Automated Manual Transmission) test unit of the tractor was installed and used to evaluate the performance of the position control. The evaluation system for the control performance consisted of forward-reverse actuator, motor driver, and controller. The tests were conducted as the controlled positions of the actuator were changed from neutral position to forward, neutral, and reverse positions in sequence. The sequential tests were repeated 20 times. The operations of changing the gearshift were considered as the step response of the control system. Maximum overshoot, settling time, and steady-state error were analyzed. The results showed that performance of the position control system was reasonable and qualified. The maximum overshoots, the steady-state errors, and the settling times of the position control system were 10~20%, 1~5%, and 0.92~1.49 sec, respectively. The modifications of the electric actuator will be required to enhance the performance of position control during field operation.

• 한국지반공학회논문집
• /
• 제22권10호
• /
• pp.131-138
• /
• 2006

페이스볼트의 타설각도는 현재 수평타설을 기준으로 하고 있으나 실제로는 수평으로부터 벗어나는 경우가 많이 발생하고 있다 본 논문에서는 페이스볼트의 타설각도가 지반보강 효과에 미치는 영향에 대하여 실내실험과 수치해석을 통해 분석하였다. 페이스볼트에 의해 굴착부근의 지표면 침하 및 막장 수평변위를 억제하려고 하는 경우는 가능한 한 수평으로 타설하는 것이 유리하며, 수평으로부터 벗어나는 경우는 타설본수를 추가하여야 하는 것으로 나타났다.

• Applied Biological Chemistry
• /
• 제41권8호
• /
• pp.583-586
• /
• 1998

Porous ceramic cups are used for monitoring ion concentration in soil solutions in various time course and depth. A soil solution sampler was constructed in laboratory by inserting pliable perfluoroalkoxy(PFA) tubings into porous cup through holes in PVC rod segment which plugged top opening of the porous cup. The system was installed in drip irrigated soil in a vertical position, and nitrogen movement below the drip basin was monitored. To collect soil solution, vacuum in the cup was applied with a hand vacuum pump. The samples obtained were sufficient enough to run quantitative analyses for a number of chemicals. Nitrogen transformation and movement could be well defined, and the system seemed to be relevant to the other soil solution samplers in monitoring chemical movement in soil. Although this system has general deficiencies found in the other samplers using ceramic cup, it could be easily constructed at a low cost. Since the tubing was pliable, the cups could be installed in horizontal position, and this allows installations of the cups at more precise depth increments and also more precise samplings of soil solution at each depth.