• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.227-231
• /
• 2014

Underwater radiated noise is one of the vital factors in underwater weapon systems like submarine. A passive elastic mount is an effective reduction method for the vibration from a ship-board machinery transmitted to the hull which is radiated as noise outside the hull. A passive elastic mount shows the limitation on the vibration reduction and needs multi stage mounting system including double stage one to meet the required underwater radiated noise criteria. It is necessary for the multi stage mounting system to consider the large displacement in the underwater shock explosion. So it is difficult to apply the multi stage mounting system in submarine because of space limitation. Also recent navy sonar system are trying to have the capability to detect the ship-borne acoustic signals in the low frequency range. An alternative to the passive mount is an active mount with moving-coil type electromagnetic actuator based on a conventional rubber mount in the low frequency range. In the previous paper, 4 active mounts with moving-coil type electromagnetic actuator based on the rubber mount were installed on the hard floor of the facility, which means no consideration on the elastic foundation effect for the control of the active mounts was taken into account. In this study, an experimental performance analysis on the active mount was carried out using 4 active mounts installed on the cylindrical structure to investigate the elastic foundation effect.

• 대한기계학회논문집B
• /
• 제37권1호
• /
• pp.27-33
• /
• 2013

제품의 성능 및 신뢰성 향상을 위하여 효과적이고, 적정한 방열장치의 중요성이 지속적으로 부각되고 있다. 현재 가장 널리 쓰이는 방열장치는 알루미늄 압출식 평행핀 형상의 히트싱크(heat sink)로 이의 설계를 위해서는 방열량과 최대 허용온도 등에 대한 목표가 결정되어야 하며, 사용 환경 및 설치 방법에 따른 열전달 계수의 예측이 이루어져야 한다. 본 연구에서는 히트싱크의 베이스가 수직, 수평상태를 유지함에 따라 나타나는 핀 주변의 자연대류 유동 특성을 전산모사 해석을 통해 고찰하였다. 또한, 일반적인 자연대류형 히트싱크를 대상으로 수평 및 수직상태에서의 열적 성능 실험을 수행하였으며, 기존의 연구결과와 비교함으로써 설치방향이 히트싱크 방열성능에 미치는 영향에 대하여 분석하였다. 실험결과 수평상태의 경우는 수직인 경우에 비하여 약 10~15% 열전달 계수의 감소가 발생하였다.

• 한국전산구조공학회논문집
• /
• 제21권2호
• /
• pp.161-168
• /
• 2008

본 연구에서는 하나의 제어장치로 서로 직교하는 2방향의 건물응답을 동시에 제어할 수 있는 동조액체질량감쇠기(Tuned Liquid Mass Damper; TLMD)를 제안하고 제어성능을 실험적으로 검증하였다. 본 연구에서 제안된 TLMD는 한 방향으로는 동조액체기둥감쇠기(Tuned Liquid Column Damper; TLCD) 내부에 채워진 액체의 운동에너지를 이용하여 구조물의 응답을 제어하게 된다. 그리고, 다른 한 방향 즉 TLCD의 직각 방향으로는 LM guide(linear motion guide) 위에 놓인 TLCD 수조와 내부의 액체의 질량을 이용하여 동조질량감쇠기(Tuned Mass Damper; TMD)로 거동하게 함으로써 구조물의 응답을 감소시킨다. 이와 같은 TLMD의 양방향 독립거동 특성을 증명하기 위해 실물크기의 구조물에 설치하여 강제진동실험을 수행하였다. 실험결과, 양방향 모두 대상 구조물의 응답을 감소시키는 것을 확인하여 제안된 TLMD의 효용성을 검증하였다.

• 한국정보전자통신기술학회논문지
• /
• 제14권4호
• /
• pp.300-306
• /
• 2021

IT기술의 발달로 인해 최근 IoT 장비에 적용되는 하드웨어 기술이 저비용, 고성능 RF 및 연산장치를 사용한 스마트 시스템들로 변화되고 있다. 그러나 방대한 양의 IoT 장비들이 설치된 인프라 환경에서 빅데이터 수집은 전송되는 데이터간 병목현상으로 인해 수집 서버의 부하가 발생한다. 이로인해 데이터수집 서버로 전송되는 데이터는 패킷 손실 및 데이터 처리율 감소 현상이 발생한다. 따라서 방대한 양의 IoT 장비들이 설치된 인프라 환경에서 효율적인 빅데이터 수집 기법이 필요하다. 이에 본 논문에서는 방대한 양의 IoT 장비들이 설치된 인프라 환경에서 효율적인 빅데이터 수집 기법을 제안한다. 성능평가 결과, 제안하는 기법의 패킷 손실 및 데이터 처리율은 전송되는 파일의 손실없이 전송이 완료된다. 향후 본 설계를 기반으로 시스템이 구현이 필요하다.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.189-199
• /
• 2016

Many implantable hearing aids are being developed as alternatives to conventional hearing aids which has inconveniences for use and social stigma that make hearing-impaired people avoid to wear it. Particularly, the fully-implantable middle ear hearing devices (F-IMEHD) are being actively studied for mixed or sensorineural hearing impaired people. In development of F-IMEHD, the most difficult problem is improving the performance of implantable microphone. Recently, Cho et al. have studied the tympanic membrane installed microphone which has better sensitivity and is easier to operate on patient than the microphone implanted under the skin. But, it may cause howling problem due to the feedback signal via oval window and ossicle chain from the transducer on round window in the middle ear cavity, therefore, a feedback canceller is necessary. In this paper, we designed NLMS (normalized least mean square) adaptive feedback canceller for F-IMEHD with tympanic membrane installed microphone and a transducer implemented at round window, and computer simulation was performed to verify its operation. The designed adaptive feedback canceller has a delay filter, a 64 point FIR fixed filter and a 8-tap adaptive FIR filter. Computer simulation of the feedback path is modeled by using the data obtained through human cadaver experiment.

• 한국전자파학회논문지
• /
• 제16권7호
• /
• pp.661-670
• /
• 2005

본 논문에서는 $2\~6$ Hz의 광대역에서 -3 dB 결합 특성과 $90^{\circ}$ 위상차를 제공하는 마이크로스트립 하이브리드를 설계하였다. 3-단 결합기 구조를 가지며, 양 측면 단은 대칭 가장자리 결합 선로로 구현되는 반면에, 가운데 단은 수직으로 장착된 평면 회로로 구성된다. 특히 수직 장착된 평면 회로는 밀 결합 특성을 얻기 위해 일부 접지면이 제거된 형태를 갖는다. 본 하이브리드는 마이크로스트립 구조이기 때문에 제작이 용이하고, 수직 장착 기판을 특성 적정화의 조정점으로 이용함으로써 양호한 튜닝 유연성을 갖는다. 무엇보다도 제안한 하이브리드는 구조와 제작의 단순성에 비해 만족할만한 성능을 제공한다.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1172-1178
• /
• 2006

Measurement of blade strain with sensors directly installed on the blade has one critical issue, how to send the sensor signal to the ground. Strain-gauges have been dominantly used to directly measure stress of a blade and either a slip ring or a telemetry system has to be used to send measured signal to the ground. However, both systems have many inherent problems and sometimes very severe limitations to be practically used. In this paper, new on-line strain monitoring method using. FBG(Fiber Bragg Grating) sensors and a beam coupler is introduced. Measurement of rotor stress using FBG sensors is nothing new, but unlike other system which installs all necessary instruments on the rotor and use telemetry system to send data to the ground, this system makes use of light's unique characteristic - light travels through space. In this new approach, single optical fiber with many FBG sensors is installed on the blade and all other necessary instruments can be installed at ground thereby giving tremendous advantages over slip ring or telemetry system. A reference sensor is also introduced to compensate the beam coupler's transmission loss change due to rotation. The suggested system's good performance is demonstrated with experiments.

• 전기학회논문지
• /
• 제63권7호
• /
• pp.1008-1012
• /
• 2014

Tunnel bracket is used in railway tunnel area in order to maintain insulation. Insulator performance evaluation test is proceeded refer to IEC 61109 but it is impossible to reflect all the field condition where insulator installed. Korea has clear four season in climatic condition and peninsula with lots of mountain in geomorphology condition. Tunnel bracket material which used in korea are butyl rubber, polymer and silicone. Most of them were installed without any internal climatic and geomorphology condition. According to the KORAIL operation data most of the insulator break down occurs in tunnel. So interval of inspection period is shorter then any other insulator and lots of maintenance cost incurs. Most major railway advanced country such as germany and japan maintain tunnel bracket with their own experience. For example visual inspection carried out with in one or two years and detailed inspection carried out between three to five years. This paper analyzed materials and shapes of tunnel bracket to in order to find optimized one in korea peninsula. Proposed bracket were tested under regulation and experience field data. Finally it was installed at the field and evaluated until now.

• Journal of Biosystems Engineering
• /
• 제29권2호
• /
• pp.159-166
• /
• 2004

In this study, we have developed a web-based management system for greenhouse teleoperation. The remote control system consisted of a database, a web-server, a controller in greenhouse, and clients. The database in the server stored user's information and greenhouse conditions was used to manage user's login and conditioning data. The management system developed by using Java applet, which was a client program for effective and easy management of greenhouse, monitored the greenhouse in real time. Master and driver boards were installed in the greenhouse control unit. Database on flowering to collect and analyze data exchanged data with the server. The master board could be managed effectively by timer routine, repeat control within setting time, and algorithm of setting points. Also, the greenhouse conditions could be controlled by manual or remote controller(PC) through a web browser in internet. Furthermore, all of the control devices of the greenhouse were managed by remote control of using PC and checked via camera installed in greenhouse. Finally, we showed the experimental results of the system which was installed in Pusan Horticultural Experiment Station.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1163-1168
• /
• 2005

This paper proposes a soft-remote-control (soft-remocon) system based on EMG signals for the Intelligent Sweet Home. The proposed system is applied to Intelligent Sweet Home which was developed to help the independence living of the elderly and physically handicapped individuals. The goal of proposed system is to control home-installed electronic devices such as TV, air-conditioner, curtain and lamp in Intelligent Sweet Home using EMG signals. Features such as VAR and DAMV having good separability performance are selected for pattern classification. FMMNN is adopted as a pattern classifier. Classification results are allowed to a developed remote control module and then corresponding infrared pulses can operate home-installed electronic devices. We concluded that EMG as an input interface for home-installed electronic devices in Intelligent Sweet Home.